MAGNETROL liquid level switches
Process temperature: -20 °C - 60 °C
... Description Standard capacitive units with rod or rope extension, for general industrial applications. Suitable for ON-OFF level control of granules, powders and liquids, IP66 ÷ 67 protection.
SGM LEKTRA
Process temperature: -20 °C - 60 °C
... tanks. Description Capacitive units with rod probe for general-purpose, suitable for ON-OFF level control in conductive or non-conductive liquids, IP66 ÷ 67 protection, installation on the top ...
SGM LEKTRA
On/Off Capacitive control is an established and extensively used level control technique. The instrument is composed of an electrode, suitable for the application, and of an electronic insert mounted inside a protective ...
SGM LEKTRA
Process temperature: 0 °C - 60 °C
NP-04 is a level control during the process filling and emptying of tanks and containers. Maximum and minimum level control. Plastic float attached to a flexible cable with three conductors. Working ...
Sensotec Instruments
Process temperature: 60 °C
Process pressure: 4 bar
Float switch for level control during the filling and emptying processes of tanks and containers. Maximum and minimum level control. Plastic float attached to a flexible cable with three ...
Sensotec Instruments
Process temperature: -30 °C - 140 °C
SRF-381-01 vertical level switch. Protection (float + stem) IP 68. Minimum density (according the float) > 0.45 g / cm³. Reed contact, 10 A maximum power., Isolation 1012Ohm, Vibration ...
Sensotec Instruments
Process temperature: -70 °C - 454 °C
Process pressure: 0 bar - 207 bar
... The instrument was designed for heavy industrial environments, including high temperature and high pressure Product Benefits Built for heavy industry Liquid level ...
Level control for filling and emptying tanks or cisterns. Microswitch electrical contacts, changeover 10A (0,5 HP) and 20A (2 HP). The waterproof float switch BL is made up of: - Single ...
GAVE ELECTRO
SKF Series Level Control Float Switches › As electrical parts are not n the water, safe and reliable › Operation distance adjustable with gravity part › Simple assembly › Limit switch ...
EMAS
Process temperature: 0 °C - 80 °C
Process pressure: 0 bar - 10.34 bar
Electro-Optic Level Switches are low cost, compact, optical level sensors with built-in switching electronics. With no moving parts, these small units are ideal for a variety of point level ...
GEMS SENSORS & CONTROLS
Fluorine Lined Magnetic Flap Level Meter Category:Equipment Browse:457 Times Product Profile Specification: Data Contains Model: UZ2.0(Pressure)/RF1000(Length)DN50 Material: 304+PTFE Maximum permissible: ±10 Resolution: ...
Luxi Chemical Group Co.,Ltd.
Process temperature: -40 °C - 80 °C
The intrinsically safe or general purpose level switch package provides liquid level detection up to 10’ (3m) with 1-4 adjustable level switch ...
Flowline
... alarm system, excessively high liquid levels, oil layer thickness or sludge layer thickness can be monitored. idOil alarm systems are available in complete packages. idOil-20 LIQ system package for detecting ...
Labkotec Oy
Process temperature: -40 °C - 230 °C
Process pressure: -1 bar - 64 bar
... is used to drive and feed back the tuning fork rod, so that the tuning fork rod can produce resonance. When the material level contacts the tunng fork rod, the frequency signal feed back by the turning fork rod will ...
Process pressure: 10 psi
... Check Lube Level Without Shutting Down Use on Engines, Pumps and Compressors Combination Indicating Gage with Low and High Limit Switch Float Operated The L129 Series Lube Level ...
Frank W Murphy Ltd.
Process temperature: -30 °C - 60 °C
Level switch measurement for min./max. alarm The level switch measuring system LB 471 is used for point level measurements, providing either high ...
Process temperature: -10 °C - 80 °C
Process pressure: 0 bar - 20 bar
... and Sanitary Wetted Parts: 316 SS High level alarm Low level alarm Pump protection Leak detection Overflow alarm Supply line control Fill/Drain control ...
Sitron
Process temperature: -20 °C - 65 °C
... Wells Oil tanks Sumps Reservoirs Sludge, slurry or turbulence Chemical storage tanks Lift station monitoring Liquid level in vented tank Landfill leachate monitoring Dewatering Pump ...
Process temperature: -10 °C - 80 °C
Process pressure: 0 bar - 10 bar
... LMM1 – 60W/VA LM2 - 30W/VA Current LM1/LMM1- 0,8A (resistive) LM2 - 0,5A (resistive) Max voltage 220V – 50Hz Fluid specific weight ³ 0.7 Fluid viscosity 150 cSt Certification and approvals - - Size ...
ELETTROTEC s.r.l.
Process temperature: -25 °C - 55 °C
Process pressure: -0.5 bar - 16 bar
Light source: LED (red light) Measurement: Switch Response time: <10 ms Process connection: 1/2" BSP male Supply voltage: 10...30 VDC Electrical connection: M12x1, 4-pin Signal output: PNP or NPN MEDIA: Fluids ...
Process temperature: -10 °C - 65 °C
... float switch 2000.0 with PG 7 thread is frequently used for level detection in medical applications. The compact design and reliable measurement also make this float switch ideal for ...
ELOBAU
Process temperature: -40 °F - 302 °F
Process pressure: 0 bar - 102.04 bar
... Capacitance level switches are designed for point level alarm or control of conductive and non-conductive liquids, granular materials, foams, pastes, slurries and interface applications. They ...
Process temperature: -40 °C - 125 °C
Process pressure: 100 psi
The OS3 industrial optical level switch is a point level sensor with built-in electronics and works with no moving parts. This level switch ...
Strain Measurement Devices
Float type level switch FB-5000 is a highly compact and durable float switch which is installed at a tank side through a nozzle. Made out of 316 SS, it has high corrosion resistance ...
... its range of level sensors in polypropylene suitable for liquids with a density higher than 0.9. The small size of its float (diameter of 18mm) is one of the particularity of this new level ...
celduc relais
Process temperature: -55 °C - 100 °C
... Conductivity Level Sensor provides point fluid detection with virtually any conductive fluid. This product specifically targets Rotating Machinery needs to protect their equipment from overheating. Minco ...
Process temperature: -40 °C - 80 °C
... reliability, high consistency Applications: - Level control, level measurement - Home appliance level detection - Water cooler, coffee machine water ...
Soway Tech Limited
Process temperature: -5 °F - 150 °F
... secured micro switch. When the level switch changes position in the liquid, the hermetic micro switch is activated by a moving weight. Electrodes give ...
MJK
Process temperature: -20 °C - 180 °C
Process pressure: -1 bar - 25 bar
... and Ground terminal. Our FRFS series RF level switch is widely used in the alarm and control of liquid, slurry, material level and two liquid interface ...
Feejoy Technology
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining