Used for removing steel partickes from liquids. Extremely efficient operation. Stainless steel housing.
FILTER DESCRIPTION The traditional Fan-Coil filter has the filter media is supported by a coated rigid rod frame. There are three versions available: 1. Sythhetic G2/G3 material approximately ...
Operating pressure: 6 bar - 40 bar
Filtration size: 0.25 mm - 1.6 mm
Protective valve for dirt-sensitive equipment The strainer, which is made of corrosion-resistant stainless steel, functions as a protective valve in all kinds of pipe, upstream of devices that are sensitive to dirt. For fluids, gas, ...
... oil-free paint sprays/pesticides use with 7100 OV cartridges, 8910 N95 Pre-Filter and 7020 retainer. For oil-based paint sprays/pesticides use with 7100 OV cartridges, 8970 R95 Pre-Filter and 7020 retainer.
Operating pressure: 20 bar
Filtration size: 1.5, 1 mm
... Removable stainless Steel filter and bolted bonnet. Draining cap threaded NPT. SPECIFICATIONS : • - Removable stainless Steel filter • - Flanges R.F. Class 150 (PN20) • - Horizontal or vertical ...
SFERACO
Operating pressure: 16, 10 bar
Filtration size: 500 µm - 1,600 µm
Flow: 40.4 m³/h - 2,160.52 m³/h
proection of pompes, valves, pressure reducing valve WATER FILTERS : GJL cast iron epoxy coated int/ext. : DN40 to 65 / GJS ductile iron epoxy coated int/ext. : DN80 to 400 Internal / external epoxy ...
Operating pressure: 25 bar
Filtration size: 500 µm
Flow: 3.4 m³/h - 48.5 m³/h
proection of pompes, valves, pressure reducing valve FEATURE : cap delivered with plug (nylon 66) 1/4 G
GORE™ Membrane Filter Sock and Tube assemblies provide highly efficient ePTFE membrane filtration for use in tubular backpulse liquid filtration systems. GORE® Membrane filter socks ...
Operating pressure: 10 bar - 40 bar
Filtration size: 1 mm - 5 mm
Body material Cast iron Screen material Stainless steel 304 PN (End) PN10/16 End Flanged Contact sealing EPDM
TECOFI
Operating pressure: 300 psi
Series P777 Plastic Wye-Pattern Strainers feature a 45² wye-pattern, NSF-approved Noryl plastic body with threaded connections, stainless steel screen and quick cleanout plug. Maximum Supply Pressure: 300psi (20.7 bar) CWP.
Operating pressure: 5,000 psi
Filtration size: 10 µm - 25 µm
... accessible without removing the filter body from the installation. No. 100857, 100919 These high pressure, non-bypass, in-line filters are suitable for both unidirectional and bi-directional circuits. ...
Port size: 3/8, 1/2, 3/4, 1, Operating pressure range: 0.05~1 MPa, Proof pressure: 1.5 MPa, Filter element: MAMG: Water separator(Removal rate 99%) / MAMB: 3μm / MAMD: 0.3μm / MAMM: 0.01μm / MAMF: 0.01μm+Deodorization.
Operating pressure: 4.8 bar
Filtration size: 0.6 µm - 5 µm
The CN Series, manufactured by Merck Millipore, is a cartridge filter equipped with a polypropylene structure and ethylene propylene o-ring. It has a filtration area of 0.42 m², maximum differential pressure bar of 4.8 ...
... engineered by Merck Millipore, is a disposable capsule filter intended for laboratory applications. It is designed with a stacked disc filter to ensure the removal of particles and microorganisms from ...
Flow: 50 l/min - 500 l/min
... half the space of a common belt filter. The operation of this innovative filter mat is very simple yet effective; in fact, the contaminated liquid is conveyed to a trough from where ...
Filtration size: 10 µm - 50 µm
Flow: 300 l/min - 1,600 l/min
Fluid temperature: 40 °C
... accumulate until they form a filter cake" that further increases the filtration rating. Despite the considerable amount of accumulated sludge, the liquid, due to the high hydrostatic pressure achieved, ...
Flow: 30 l/min - 700 l/min
... the machine tool via an electric pump. The magnetic disk filter unit does not use disposable filter media, allowing for easy differentiated disposal of extracted sludge. The magnetic filter ...
Operating pressure: 25 bar
Fluid temperature: -30 °C - 180 °C
Strainer for liquids and gases sturdy construction different materials different mesh sizes magnet separator (with SFM) Operation: Inside the strainer SF, SFD and SFM a screen basket is fitted to retain solids. Additionally ...
... manufacturing a large part of our program of filters and pressure vessels in polyester reinforced with fiberglass (GRP). Advantages Mechanical strength. Proportional elastic behavior. Resistance to ...
Unitecno, SL
... capacity compared to “Y” and temporary filters. Allow for easier cleaning, especially in sizes greater than 12” (DN 300). Optimized bodies with high open free area surface ensuring minimum pressure loss in gas and ...
Unitecno, SL
Y type strainers are the most common and economical strainers for permanent filtering of liquids, steam and gases. Ideal for applications where the fluid does not have large ...
Unitecno, SL
... real-world environmental clean-up. PECOFacet's patented MPak coalescing plates are designed to separate oil and solids from water using the differences in their specific gravities. They have integral molding that ensures ...
Operating pressure: 25, 40, 6, 16 bar
Flow: 1 m³/h - 3,200 m³/h
Fluid temperature: -60 °C - 450 °C
... can cause a major damage to the whole pipeline system, which as a result can force the facility to limit or stop the flow of liquid. That is why strainers are an obligatory part of shipbuilding, as well as heating, steam ...
Operating pressure: 16 bar
Flow: 1 m³/h - 190 m³/h
Fluid temperature: -10 °C - 200 °C
Material: Żeliwo szare Working position: Dowolna Features •compact settlement •environment-friendly •tests acc. to EN – 12266 – 1 •screen made of stainless steel •cleaning of screen without disassembling
Paper filter for wet coating spray booths. Suitable for the overs prayed liquid color. Easy installation with long life. Suitable for industrial application and absorption machines
Flow: 700 l/h
... It works only if it is connected in series with the filter pump through special valves. The recovering takes place through the resin, contained in the filter unit. The passage of the liquid ...
... loose activated carbon powder or granules and no need for use of filters to remove activated carbon from the process fluid are some of the benefits. CARBON FILTER PAPERS AND FILTER ...
Operating pressure: 16 bar - 50 bar
Flow: 1,500 m³/h - 30,000 m³/h
Fluid temperature: -10 °C - 120 °C
First choice for large volume flows: Our FWS flange filter filters up to 30,000 m3 of compressed air per hour as standard. It removes solid, liquid and - with activated carbon filter ...
Fluid temperature: -10 °C - 60 °C
Combined filters work under a centrifugal system and are specifically indicated and designed for separation of solids and liquids found in large concentrations in gas f low. Combined filters ...
Cometel filtering equipment is used for filtering and recovery of cutting fluids. The liquid is taken to a diffuser where it is distributed over a filtering fabric that ...
Filtration size: 40, 200 µm
Flow: 150 l/min - 400 l/min
... discharge take place via a stainless steel continuous filter belt. The self-cleaning filter belt reliably retains particles from machining operations. GKD produces belt filter systems ...
Operating pressure: 0 bar - 5 bar
Filtration size: 2 µm
Flow: 1.6, 2.5, 5, 9, 12 l/min
... pressure gauge to check the element contamination level. - All SE off-line oil cleaners are fitted with M-series 2μ absolute filter elements (beta ratio ß2 >400). - Standard units are suitable for systems with an oil ...
Operating pressure: 6 bar
Flow: 2.2, 3.8 l/min
... removes all the particles that are not removed by the conventional filters, and performs a total cleaning of the oil by removing solid particles (carbon, metallic particles) absorbing water and eliminating ...
Flow: 8 l/min - 100 l/min
... conventional filters and performs a total cleaning of the oil by removing solid particles, absorbing water and eliminating sludge and other oil oxidation residues. All systems are fully equipped and ...
Filtration size: 0.1 µm - 30 µm
... sector. PURASPIN® enables you to quickly and efficiently test different depth filters or quickly purify a small amount of liquid in an early stage of the process. The filters are simply ...
Operating pressure: 2, 2.5 bar
Fluid temperature: -20 °C - 60 °C
Lab filter for filtration method development. The purpose of the mini capsule lab filter is to have a tool to find the best filtration solution for a given application to determine the ...
Please specify:
Help us improve:
remaining