Mass flow stainless steel valves

Pressure: 300 psi
Temperature: 149 °C

Overview This valve is installed in the downstream of sampling systems/heat exchanger. The valve responds only to temperature. Under normal operation, the valve is fully open. If the ...

DN: 15 mm - 300 mm
Pressure: 150, 300 psi

... of MNC 3 & 4 Way Ball Valve. This Ball Valve is available in sizes that range from 15 MM to 300 MM. Sturdy constructions, long service life, fine finishing are some of the main factors of our 3 & 4 Way ...

DN: 50 mm - 600 mm
Pressure: 1.6, 2.5, 4 bar

Pressure Relief Valve Body: Cast Iron, Ductile Iron, Carbon Steel, Stainless Steel Diaphragm: EPDM , NBR Disc: Cast Iron, Ductile Iron, Carbon Steel, ...

DN: 12.7 mm - 203.2 mm

... Series is a two piece, full port, flanged end ball valve with an ISO 5211 compliant direct mount actuation pad. The 10E10 is available in sizes ranging from ½” to 8” with ASME Class 150 flanges. Valve ...

DN: 15, 20, 25 mm
Pressure: 42 bar
Temperature: 426 °C

Complete SS construction, AISI 304, (Suitable for blowing out dirt from strainer element)

DN: 12 mm
Pressure: 0 bar - 40 bar
Temperature: 1 °C - 60 °C

... scale etc.) require the TEC-44. The TEC-44 is impossible to block due to its powerful ball valve rotation and large orifice. FEATURES Stainless steel ball valve, ...

DN: 1.411 mm
Pressure: 50 psi - 25,000 psi

... start/stop control of various pneumatically piloted devices such as HII pumps, valves and boosters. Maximum air valve pressure is 120 PSI. Sensing section alloys are stainless steel. ...

... Replaceable Seat on needle valve body available for improved valve life. Pneumatic Actuators for Remote Valve Operation Types Normally Closed – Air is required to open the valve ...

Hydraulic distributor with 4/3 way directional valve, 350 bar of pressure, built in stainless steel for hydrodynamic presses for forging and extrusion. We design and build any hydrodynamic ...

DN: 10 mm - 50 mm
Pressure: 100 bar
Temperature: -20 °C - 180 °C

FPM shaft “o” ring PTFE + 15% GF ball seats Stainless steel valve BSP threaded Nominal pressure: 100 Bar Working pressure: see pressure / temperature diagram Temperature = -20°C +200°C

DN: 15 mm - 600 mm
Temperature: 260 °C

... sealing system ensures minimum emissions. Materials Standard products are available with carbon steel body and stainless steel trim or all stainless steel ...

DN: 50 mm - 250 mm
Pressure: 10 bar
Temperature: 150 °C

The float valve is direct action device, the float or buoy is acting by the thrust of the fluid that finally is transmitted to the valve arm and closing seat. Valves are available in ...

DN: 0.75 in - 1.25 in
Pressure: 4.4 bar - 16 bar

... are made of stainless steel, and are of excellent rust-proof; the sealing is employed with Teflon, could be applied extensively, and could be used for high temperature liquid and strongly corrosion liquid, ...

DN: 0.25 in
Pressure: 0 bar - 10 bar
Temperature: -60 °C - 80 °C

... product range includes: Filter Regulators Filters Volume booster Lock-up valves Unidirectional and bidirectional flow regulators Quick Exhaust valves Shavo's Lockup Valve retains ...

Pressure: 0 Torr - 760 Torr
Temperature: 0 °C - 150 °C

... removed from the body without requiring removal of the valve from the system. Please contact us for options such as roughing ports or valves that remain open in the event of power failure. Manual Gate ...

DN: 0.5, 0.25, 0.375, 0.75 in
Pressure: 400 bar
Temperature: 0 °C - 240 °C

Isolation of instrument Venting of instrument Liquid and vapour servicePlease click view datasheet for specifications, technical drawings and ordering details.

DN: 8 mm - 100 mm
Pressure: 125, 69, 100 bar
Temperature: -38 °C - 220 °C

3-pcs. ball valve with ISO mounting top for mounting of actuator without use of bracket. Antistatic stem with pyramid segment. Maintenance free stuffing box. Available as control valve. (Option: FDA ...

Pressure: 60 psi - 100 psi

... mixing speeds and process control Stainless steel wetted parts and valve body Divorced design prevents fluid from contaminating the valve actuators Separate material ...

DN: 15 mm - 600 mm
Temperature: -50 °C - 600 °C

... emergencies Medium: The valve is suitable for several media including water, steam, oil, gas, petrol products, nitric acid, acetic acid, etc. Working temperature: from -46oC or -50oC (stainless steel ...

DN: 25 mm - 100 mm

... easy replacement of existing valves. The GULBINAT standard ball valve can be used as a regulating valve, is piggable and avoids pipe blows. The use of the GULBINAT ball valve ...

DN: 6.8 mm
Pressure: 100, 30, 15 bar
Temperature: -200 °C - 100 °C

Application: Cryogenic applications down to -200° C / -328° F using high purity reactive gases Key Advantages: Reduced gas absorption and desorption from seat material Fully contained seat Double-walled, electronic beam ...

Viton® O-Ring Sealed Gates Stainless Steel Construction Manual & Electropneumatic Operation

Pressure: 0 bar - 150 bar

QYF-2R sampling valve is used for calibration gas cylinder sampling. This valve could directly connected with cylinder and easy to opearate It is for corrosive gases: NH3, NO, H2S, SO2 Max input pressure:15MPa It ...

DN: 40 mm - 1,200 mm
Pressure: 6, 10, 16 bar
Temperature: -40 °C - 150 °C

... series Butterfly valve is different from others since it is available in many different models. Therefore it is suitable for use in many different industrial enviroments and media. The body is standard from Nodulair ...

Temperature: 196 °C - 650 °C

... based stainless steel alloy, mostly developed for aggressive applications, involving sulfuric acid, phosphoric acid etc. It resists pitting and chloride ion corrosion and also solve stress corrosion, ...