- Hydraulics - Pneumatics >
- Valve >
- PTFE valve >
- Mival
Mival PTFE valves
DN: 25 mm - 150 mm
Pressure: max 10.0 bar
ESL seat valve For sensitive beverages without preservatives and beverages distributed outside of the cold chain Cost-attractive design, suitable for ESL applications Rotational decoupling on linkage between ...
Evoguard GmbH
DN: 10 mm - 65 mm
Pressure: 16 bar
Temperature: -10 °C - 200 °C
Farbo presents a new pneumatic globe valves series. The body in stainless steel makes new valves suitable for all applications which require aggressive fluids and performances up to 200° C and 16 bar ...
Suitable for use in industrial chemical complexes, for gas and water distribution and food industry Body material from bar (A 105 or AISI 316) Bolted flange as body-cover for ball Flanges drilled acc.to UNI or DIN Possibility of equipment ...
THERMOMESS S.r.l.
DN: 15 mm - 200 mm
Pressure: 40 bar
Bolted yoke bonnet. • Rising stem and handwheel. • Stainless steel or PTFE sealings. • Distance between sides according to DIN 3202 F-1.
Valvulas VS, S.L.
DN: 1 mm - 6 mm
Temperature: -10 °C - 200 °C
Pneumatic control valve VALVE STYLE Globe valve USAGE Throttling service Low-pressure service On/off service VERSION ANSI SUPPLY Pneumatic VALVE ...
Pfeiffer Chemie-Armaturenbau GmbH
DN: 50 mm - 500 mm
Pressure: 10, 6 bar
Temperature: 180 °C
One-piece body, tight-closing, centric disc With blow-out proof shaft Design for mounting between flanges according to DIN EN 1092-1 Face-to-face length according to DIN EN 558-1-R20 Leakage rate A according to DIN EN 12266-1 For ...
DN: 100 mm - 500 mm
Pressure: 6 bar - 10 bar
Temperature: 80, 400, 250 °C
... GUIDING :Eccentric roller galvanized structural steel / roller stainless steelSEALING :Adjustable packing gland (aramide / PTFE / graphite)TIGHTNESS IN THE PASSAGE :Gastight up to 0,5 barü to leak rate ETIGHTNESS TO ...
Jaudt Dosiertechnik Maschinenfabrik GmbH
DN: 15 mm - 50 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 180 °C
... designed 2/2 off valve and Y-type steam valve specialist M & M. Y-type steam valve for a variety of fluids such as water, oil, air, steam, and other corrosive fluids. Liquid temperature ...
Genn Dih
DN: 30 mm
Pressure: 900 mbar
Flow rate: 150 l/h
... membrane that is securely held in the housing under high pressures using screw threads. The V30AM with a PTFE membrane functions as a pressure equalization valve up to the opening pressure point. The ...
DN: 0.5 in - 8 in
The PTFE sleeve serves as the seat for the valve plug thus eliminating contact of two metal surfaces. Turning effort is low and galling is avoided. The design also permits the use of any body/plug material ...
DN: 25 mm
Pressure: 40 bar
Temperature: -20 °C - 180 °C
Gas ball valve stainless steel DN25 - 1" inch full port design seal made of PTFE / Viton for gas DVGW-Gas Seal steam: - PTFE / Viton length: - 82mm actuator: - lever handle made ...
NieRuf Gmbh
DN: 50 mm - 300 mm
Pressure: 6 bar - 16 bar
Temperature: -20 °C - 180 °C
• wafer type butterfly valve designed according EN 593 • flange connections according EN 1092-2 - PN6/10/16, ASME/ANSI B16.5 class 150, ASME/ANSI B16.47 class 150 series A • face to face dimension according EN 558-1 ...
DN: 8 mm - 100 mm
Pressure: 25, 64, 16, 30 bar
Temperature: -20 °C - 160 °C
Full bore ball valve, F/F threaded, with aluminum handle.
Rubinetterie Bresciane
Vatac Resilient Seat Through Conduit Gate Valve are designed and manufactured API 6D, the gate is under closing status, and the seat surface PTFE Sealing Ring forms an initial sealing, when the gate valve ...
Vatac Valves (Wenzhou) Corporation
DN: 0.5 in - 30 in
... for you! Types Ball Valves -Full Bore & Reduced Bore, Cast & Forged Steel, Side & Top Entry Butterfly Valves – Soft Seated & Metal Seated High Performance Gate Valves – Standard ...
DN: 50 mm - 1,200 mm
... pipeline system; 2.This gate valve requires smaller space and knife gate valve can effectively increase the pipeline strength and reduces possible vibration. 3.Valve disc made of ...
Henan Quanshun Flow Control Science and Technology Co.,Ltd
DN: 15 mm - 65 mm
Pressure: 6 bar - 8 bar
Temperature: -15 °C - 225 °C
... Actuator in stainless steel AISI 304 Normally-closed, normally-open, double-effect function Seal in modified PTFE or PEEK Packing in PTFE and FPM Guided shaft for stable axial movement Self-centering ...
DN: 15 mm - 300 mm
Pressure: 16 bar - 40 bar
Temperature: -200 °C - 530 °C
Three-way control valves in mixing and diverting versions Available both as a mixing (2003) and as a diverting valve (2013), the three-way control valves of A. Hock’s Series 2003 are ...
DN: 10 mm - 200 mm
Pressure: 16 bar - 160 bar
Wafer type ball valve is a flange end 1pc ball valve with super-short one piece body design, has short distance between the valve seat and the end flange, less medium retention, superior ...
Wenzhou Pioneer Valve Co., Ltd.
DN: 50 mm - 600 mm
Pressure: 1 MPa
Motorized High Vacuum Butterfly Valve used for Chip Production Industry Electric Butterfly Valve Application DCL electric motorized high vacuum butterfly valves are widely used ...
PTFE high vacuum valve The properties of high vacuum and PTFE rubber O-rings at the top could arrive at the perfect effect of high vacuum and corrosion resistance. PTFE ...
Shenzhou Engineering Plastics Company
DN: 8.5 mm - 80 mm
Pressure: 40, 63 bar
Temperature: -20 °C - 180 °C
BSP Female Thread: DIN / ISO 228 Two-piece - AISI 316 Full-Port Sealings: Ball + Stem = PTFE (-20°C to +180°C) At higher temperatures please note the pressure / temperature diagram.
Flow rate: 2 l/h - 15 l/h
... digital output. The non-linearity of the valve can be repaired by software in five points. Built-in security feature: In case of power loss the valve has a battery backup that closes or opens the ...
DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: 0 °C - 60 °C
EFFAST PVC-U valve BK1 is a true union ball valve ideal for heavy duty applications, chemical applications and water treatment. Technical features: Solvent welded sockets (ISO, BS, ASTM, JIS), threaded ...
Effast
DN: 25 mm - 600 mm
Pressure: 0 bar - 16 bar
Temperature: -30 °C - 200 °C
... development of PTFE seats and metal seats of double eccentric high performance valves today,butterfly valves are used from basic water applications to industrial applications and highly ...
Doruk Endustri Ltd.
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining