DN: 25 mm - 100 mm
Pressure: 10 bar
Temperature: -10 °C - 140 °C
The INNOVA N-Type valve is a pneumatic shut-off seat valve for hygienic applications. The valve is authorized to carry 3-A symbol. Note: Consult the options of the valves ...
INOXPA
DN: 10, 15, 20 mm
Pressure: 6 bar - 8 bar
Temperature: -10 °C - 140 °C
The INNOVA Mini N valve is a shut-off single seat valve suitable for any use that the pharmaceutical, chemical, food or beverage industries could be required. Hygienic design according to EHEDG. Gasket ...
INOXPA
DN: 25 mm - 100 mm
Pressure: 6 bar - 10 bar
Temperature: 140 °C
The L type valve is a pneumatic divert single seat valve with diverging flow designed for hygienic applications. The plug is specifically designed to manage diverging flows, given that it closes against ...
INOXPA
DN: 0.5, 0.25, 0.125, 0.375 in
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C
Stopper valve pneumatically actuated, G 1/8, Plug connector 6/4, For high-speed positioning and stop functions as well as emergency switching (e.g. emergency stop). If a control signal is present at port 3, air can ...
RIEGLER & Co.KG
DN: 10 mm - 50 mm
Pressure: 16 bar
Temperature: -10 °C - 200 °C
... leakproofness class – A acc. EN -12266 – 1) •compact settlement •environment-friendly •tests acc. EN – 12266 – 1 Stop valve, ends threaded, form straight 201 Grey cast iron EN-GJL-250 A Nominal diameter (mm) 050 Nominal ...
ZETKAMA Sp. z o.o.
DN: 15 mm - 300 mm
Pressure: 6 bar - 160 bar
Temperature: -60 °C - 550 °C
... drilled according to EN 1092-1 for body material F •face-to-face dimension according to EN 558 series 1 Bellow sealed stop valves, ends flanged, form straight 215 Grey cast iron EN-GJL-250 A Stem and disc connection ...
ZETKAMA Sp. z o.o.
DN: 15 mm - 300 mm
Pressure: 10, 25, 16, 6 bar
Temperature: -60 °C - 450 °C
... acc. EN – 12266 – 1 •flanges drilled according to EN 1092-2 •face-to-face dimension according to EN 558 series 8 Stop valves, ends flanged, angle form 216 Grey cast iron EN-GJL-250 A Stem and disc connection - ...
ZETKAMA Sp. z o.o.
Pressure: 285, 300 psi
Temperature: 180 °F
The Cla-Val Deluge Valve is designed for use in controlling water flow to Deluge, Pre-Action, or Foam-Water type fire protection sprinkler systems. This valve is UL Listed in “Special Systems Water ...
Pressure: 250, 400 psi
Temperature: 180 °F
... the Pressure Reducing Valve. A relief valve of not less than 1/2 inch in size must also be installed on the downstream side of the pressure control valve. Adequate drainage for the relief ...
Pressure: 250, 400 psi
Temperature: 180 °F
• Globe or Angle Pattern • Proven Reliable Design • Available in Cast Bronze, Iron and Steel • Accurate Pressure Control • In Line Service Cla-Val 90G-42 (globe) and 90A-42 (angle) Pressure Reducing ...
Overview CRANE® bronze angle valves have stood up to commercial and industrial services for more than a century.
Overview Bellows sealed globe valve for chemical applications with safety gland packing in straight type, y-type or corner-type; with flanges or buttweld ends; can be supplied in carbon steel 1.0619 ...
AB-Cocks are simple constructed, robust shut-off cocks which are specially designed for the measurment engineering. Due to their reliability and economic efficiency they are applied by the million. Operating Principle AB-Cocks A cylindrical ...
DN: 25 mm - 200 mm
Pressure: 102 bar
Temperature: -20 °C - 60 °C
PVS 782 PVS type slam shut valves are pilot-operated relief valves in which the opening and the closing of the main plug is controlled by a pilot device which is very sensitive to the variations of ...
DN: 1 in - 10 in
CONTROL GAS VALVES Reflux 919 The Reflux 919 Control is a pneumatic control valve, specifically designed for use with normal gas, commonly operated by a direct-acting type diaphragm actuator (mod. ...
DN: 0.5 in - 2.5 in
Pressure: 16 bar - 40 bar
Temperature: -40 °C - 250 °C
Self-actuated flanged or threaded EN or ASA Pressure reducing valve, suitable for steam, gases and liquids for reduce pressure in lines, available in different materials and pressure ranges.
DN: 15 mm - 100 mm
Pressure: 16 bar - 40 bar
Temperature: -10 °C - 200 °C
Flanged EN or ASA 2 ways linear control valve available in different materials and pressure ranges with electric, electro pneumatic or pneumatic action.
Injection control valve Tasks Injection control valves are primarily flow control valves, which means they supply the required amount of cooling water to the point of use. The pressure ...
Level control valve Tasks One of the functions of condensate (level) control valves is to control the level of accumulated condensate and discharge it to the main or auxiliary condenser. Different types ...
Pressure: 60 bar - 280 bar
Flow rate: 40 l/min
... - Technical information - Minimum purity of the medium: ISO 4406 19/17/14 (NAS 8) A and B versions with check valve - Height - 40 mm - Pressure range - 60 - 280 BAR - Flow - Max. 40 l/min
DN: 0.75 in - 2 in
Pressure: 0 bar - 10 bar
Temperature: -5 °C - 60 °C
... rangeSee table Temperature rangeFluid : -5ºC to 50ºC (no freezing) Ambient : -10ºC to 50ºC Materials in contact with mediaMain Valve: Reinforced Nylon 6 Diaphragm: NBR, FPM (Viton®), EPDM, Polyurethane
BACCARA AUTOMATION
DN: 0.75 in - 2 in
Pressure: 0 bar - 5 bar
Temperature: -5 °C - 60 °C
•Ports size: 3/4″ – 2″ BSP, NPT •Orifice size: 27.0, 55.0 mm •Body material: Plastic
BACCARA AUTOMATION
DN: 0.25 in - 1 in
Pressure: 0 bar - 10 bar
Temperature: -5 °C - 60 °C
... rangeSee table Temperature rangeFluid : -5ºC to 50ºC (no freezing) Ambient : -10ºC to 50ºC Materials in contact with mediaMain Valve: Brass or Stainless Steel AISI 316 Seals: NBR/PU, FPM (Viton®), EPDM and PTFE
BACCARA AUTOMATION
DN: 250 mm - 3,000 mm
The dapò valves are widely used where a regulation of the flow rate or a partialization of the air flows is required. Dapò adjustment valves with diameters from 250 mm up to 3000 mm are possible. For ...
DN: 10 mm
Pressure: 0.2 bar - 10 bar
Temperature: 5 °C - 60 °C
... industrial applications, containers are usually kept at a constant filling level by using float valves. Valves of this design are 2-chamber globe valves and have an ...
DN: 2, 3, 1 in
Pressure: 15,000 psi
... premium quality plug valves offering for a wide range of well drilling production&well-servicing applications. Available the range in size1”ro 3”&pressure rating upto 15000psi. Other valve products, such ...
DN: 15 mm - 50 mm
Pressure: 25 bar
Temperature: -15 °C - 200 °C
Special features • - Consisting of single-seated globe valve and actuator • - Flanges or male thread connection and welding or threaded ends or female thread connection Accessories • - Type ...
SAMSON
DN: 6 mm - 16 mm
Ventilation elements Air valve, pneumatically activated Air Valve
Pressure: 25 psi - 125 psi
... control valves are compact 1/8" ported 4-way valves that may be actuated by hand, remote air signal, electric signal, or mechanically by a machine element. LTV valves are ideal for powering ...
Bimba
DN: 2 in - 8 in
Pressure: 15,000 psi
Temperature: -46 °C - 177 °C
Cameron’s first nonretrievable subsea choke was installed in 1975, and with more than 800 of these rugged chokes installed to date, they continue to demonstrate that they are a proven, reliable choice. Permanently mounted to a subsea ...
DN: 32, 40, 25 mm
Pressure: 52 bar
Temperature: -60 °C - 120 °C
... environments. The valve's weld-in feature design reduces potential for connection leaks. This design has a higher working pressure, a greater working temperature range and higher flow capacities than competitive products. ...
Parker Refrigerating Specialties Division
DN: 6, 14 mm
Pressure: 15, 12 bar
Temperature: -40 °C - 75 °C
The X series is a Heavy Duty direct operated valve for air actuators control in the Process Industry. The poppet design and direct acting control makes this product extremely reliable even in the most critical offshore ...
DN: 15 mm - 250 mm
Pressure: 23.8 bar - 40 bar
Temperature: -10 °C - 400 °C
... control, flanged connections according to EN1092-1 PN 40 with prominence. Streamlined flow valves, Streamlined flow valves bellows type, Streamlined flow valves bellows type on carbon ...
Mival
DN: 350 mm
Pressure: 16, 25 bar
Temperature: 350 °C
Bellows-type globe valve to DIN/EN with flanged ends, with on/off disc or throttling plug, standard position indicator with colour coding for identification of valve design, replaceable ...
DN: 0.125 in - 0.75 in
Pressure: 414, 1,035, 690 bar
Temperature: -40 °C - 121 °C
... ®, CTFE Valve Stem 17-4 Stainless Steel Remaining Parts -316 Stainless Steel, Brass Flow CapacityVA Series -Valve: Cv = 0.75 -VG Series Valve: CV = 2.0 Weight (approximate) -VA ...
Emerson Automation Solutions - TESCOM
DN: 31.8 mm
The Fisher D4 control valve is a compact, rugged globe valve designed primarily for high-pressure, throttling applications using either pneumatic or electric control. This valve ...
FISHER REGULATORS
DN: 15, 20, 25, 40, 50 mm
Pressure: 16 bar
Temperature: 220 °C
The PN-COSR is a pneumatic control valve designed for remotely controlling steam pressure based on the structure of the TLV COSR pressure reducing valve which is suitable for use in steam heating processes. ...
TLV Euro Engineering
Please specify:
Help us improve:
remaining