OKS water-resistant greases

Operating temperature: -30 °C - 120 °C

... Subsequent lubrication at the lubrication nipples by grease gun. Assess the lubrication frequency and quantity on basis of service conditions. If old grease cannot be removed, restrict the quantity of grease ...

Operating temperature: -30 °C - 150 °C
Flash point: 260 °C

... temperature range, as well as all sliding speeds permissible for grease lubrication Advantages and benefits Modern grease with a wide range of applications Supports sealing of bearings Good corrosion ...

Operating temperature: -50 °C - 120 °C

... Relubrication with a grease gun on to the grease nipples or with an automatic lubrication system. Relubrication intervals and amount to be defined acc. to the service conditions. If the removal of the old grease ...

Operating temperature: -25 °C - 150 °C

... OKS 418 is an economic hot bearing grease for lubrication of friction and rolling bearings at higher temperatures. Areas of application Grease lubrication of plain and rolling bearings at high temperatures, e.g. ...

Operating temperature: -10 °C - 160 °C

... Relubrication with a grease gun on to the grease nipples or with an automatic lubrication system. Relubrication intervals and amount to be defined acc. to the service conditions. If the removal of the old grease ...

Operating temperature: -40 °C - 140 °C
Pour point: 268 °C
Flash point: -65 °C

... at the lubrication nipples by grease gun or by automatic lubrication system. Assess the lubrication frequency and quantity on basis of service conditions. If old grease cannot be removed, restrict the quantity of grease ...

Operating temperature: -30 °C - 200 °C

... Synthetic grease for bearing points subject to extremely high temperatures and corrosive environmental influences. Areas of application Lubrication of bearing points at furnace, cooling-bed and conveyor systems, motors and hot-air ...

Operating temperature: -15 °C - 160 °C

... OKS 427 is a gear and bearing grease at high temperatures and high loads. Areas of application Lubrication of highly stressed and relatively slowly running gears where due to leakage a grease must be used instead ...

Operating temperature: -20 °C - 120 °C
Pour point: -20 °C
Flash point: 200 °C

... Relubrication with a grease gun through the grease nipples or with an automatic lubrication system. Relubrication intervals and amount to be defined acc. to the service conditions. If the removal of the old grease ...

Operating temperature: -30 °C - 110 °C

... Advantages and benefits NSF H1 registered Reduces wear Excellent resistance to oxidation and ageing Resistant to hot and cold water, water vapour, watery-alkaline and acidic disinfectants and ...