OKS 427 is a gear and bearing grease at high temperatures and high loads.
Areas of application
Lubrication of highly stressed and relatively slowly running gears where due to leakage a grease must be used instead of oil
For drives under high and shock load
Chain lubrication of e.g. hollow pins, chains in the conveyor and transport field, under the influence of water and vapour and at higher operation temperatures
Bearing lubrication of roller and plain bearings at annealing furnaces and drying equipments, manipulators and robots, conveyor and cooling systems, machines of preserve industry, steam sterilizers, etc.
Advantages and benefits
Best use in corrosive operation conditions with high operation temperatures and high pressure and shock load
Economically due to optimum formulation
Reduces wear and thereby downtime and enables long-term lubrication
Ropy, strongly adhesive, temperature and water resistant, noise dampening, high-load and shock absorbing
Operating temperature: -15 °C → +160 °C
NLGI grade: 0-00
Base oil viscosity (40 °C): 490 mm²/s
For optimum effect clean thoroughly the lubrication point e.g. with OKS 2610/2611 Universal Cleaner. Before initial filling remove corrosion protection agent. Fill bearing so that all functional areas receive grease for sure. Normal bearings are filled up to 1/3 of the free interior housing space. Slow-running bearings (DN value < 50,000) and their housings have to be completely filled. Fill gear housings only up to 3/4. Instructions of the bearing and machine manufacturer have to be observed. Relubrication intervals and amount to be defined acc. to the service conditions.