OKS 1144 is a multipurpose silicone grease for bearings at changing temperatures and medium speeds.
Areas of application
Lubrication of rolling and friction bearings at operating temperatures around +170°C up to rotating speed limit
For example, smaller bearings of exhaust-gas turbochargers, hot-air fans, hot-water pumps, washing machines and laundry dryers, as well as clutch pressure and release bearings etc.
Also suitable for plastic/plastic sliding pairs
Advantages and benefits
Highly effective due to optimum temperature-stable silicone grease formula
Excellently suited for grease lubricating points subject to changing temperature loads
Broad range of uses outside normal grease performance areas
Operating temperature: -40 °C → +200 °C
NLGI grade: 2
DN factor (dm x n): 300,000 mm/min
Base oil viscosity (25 °C): 125 mm²/s
Four-ball test rig (welding load): 1,100 N
For best results, clean lubricant points and surfaces carefully, e.g. with OKS 2610 or OKS 2611 universal cleaner. Remove the corrosion protection ahead of the initial filling. Fill the bearings in a way that all the functional surfaces for sure get the grease. Slow moving bearings(DN-value 400,000) up to about 1/4. Observe the instructions of the bearing or machine manufacturer. Relubrication with a grease gun on to the grease nipples or with an automatic lubrication system. Relubrication intervals and amount to be defined acc. to the service conditions.