OKS 410 is a high-pressure long-life grease for lubrication points subjected to pressure or impacts also under outdoor exposure.
Areas of application
Grease lubrication of unsheltered parts subject to heavy loading and/or impacts, such as friction, rolling and pivoting bearings, splined shafts, knockout spindles, threaded spindles and sliding surfaces of all kinds
For harsh operating conditions
Advantages and benefits
Excellently suited as a safety lubricating grease in mixed friction sector with especially good wear protection
Effectively protects against corrosion
Contains Mox-active to improve performance
Operating temperature: -20 °C → +130 °C
NLGI grade: 2
DN factor (dm x n): 500,000 mm/min
Base oil viscosity (40 °C): 185 mm²/s
Four-ball test rig (welding load): 3,600 N
For best results clean the lubricating point carefully. Clean with solvents like OKS 2610/OKS 2611 Universal Cleaner. Remove the corrosion protection ahead of the initial filling. Fill the bearings in a way that all the functional surfaces for sure get the grease. Slow moving bearings(DN-value < 50,000) should be filled completely, normal moving bearings should be filled to 1/3 of the free inner housing space. Observe the instructions of the bearing or machine manufacturer. Relubrication with a grease gun on to the grease nipples or with an automatic lubrication system. Relubrication intervals and amount to be defined acc. to the service conditions. If the removal of the old grease is not possible the amount of grease has to be limited to avoid excess lubrication of the bearing.