Lubricating grease 1155

siliconefor the chemical industryfor machine tools

OKS 1155 is a strongly adherent silicone grease for lubrication of plastics and elastomers. Areas of application Lubrication of sliding points between metals, plastics and elastomers to each other and with each other at low sliding speeds with an increased sealing effect, e.g. lubrication of O-rings in pneumatic systems of brake systems Advantages and benefits Broad range of uses outside normal grease performance range Broadband lubricating grease with good sealing properties Technical specifications consistency: 2 NLGI grade (DIN ISO 2137) viscosity at (25°C): 100 mm²/s Applications For best results, clean lubricant points and surfaces carefully, e.g. with OKS 2610 or OKS 2611 universal cleaner. Remove the corrosion protection ahead of the initial filling. Fill the bearings in a way that all the functional surfaces for sure get the grease. Slow moving bearings(DN-value 400,000) up to about 1/4. Observe the instructions of the bearing or machine manufacturer. Relubrication with a grease gun on to the grease nipples or with an automatic lubrication system. Relubrication intervals and amount to be defined acc. to the service conditions. If the removal of the old grease is not possible the amount of grease has to be limited to avoid excess lubrication of the bearing. At longer relubrication intervals a complete exchange of the old grease is recommended. Only mix with appropriate lubricants.