- Power Transmission - Mechanical components >
- Actuator and Positioning System >
- Pneumatic cylinder >
- Parker Pneumatic Division Europe
Parker Pneumatic Division Europe pneumatic cylinders
... a long life. Our pneumatic cylinders are made of aluminium, stainless steel and also surface-treated steel. The piston rods in a standard cylinder are made of hard chrome-plated stainless ...
Stroke : 5 mm - 165 mm
Force: 0.95 kN - 13 kN
Speed: 0 m/s - 0.3 m/s
EPK 12: 7,3 kN - EPK 21: 13 kN • EPK 21 unità idropneumatica / EPK 21 hydropneumatic unitEPK 12 unità idropneumatica / EPK 12 hydropneumatic unit • EPK 12 Model - EPK 21 Model • Driving Force EPK 12: 7,3 kN (730 kg) at 6 bar • Driving ...
LDP Italia - Thrust Technology srl
Rod diameter: 20 mm - 26 mm
Force: 4,000 N - 6,300 N
... locating cylinders to be ideally adjusted to suit the clamping task. Due to the small diameters, the spacing between the locating cylinders can also be reduced. The 3 clamping balls are mechanically ...
Stroke : 5 mm - 48 mm
Bore: 12 mm - 116 mm
Torque: 2 Nm - 2.95 Nm
... in linear axes, in toolmaking and tool machines, in hydraulic and pneumatic equipment, handling equipment and other applications. Application field Linear slides, Pneumatic cylinders, ...
ACE
Stopper D28L, N10 Tube clamp D28L, N10Ring D50Spring hookRubber foot D28LStopper D28L, N10D28L base plateEcoShape base plate D28L, N10 tube clamp Tube clamp D28L/N10 for fastening material shelves with a 10 mm slot to the D28L round ...
Stroke : 10 mm - 200 mm
Pressure: 1 bar - 10 bar
Rod diameter: 8 mm - 25 mm
The pneumatic cylinders feature magnetic pistons and are available in the following versions: double-acting with fixed end position damping, double-acting with adjustable end position damping According ...
Stroke : 1 in - 2 in
Pressure: 0 psi - 250 psi
Force: 0.71 N - 0.79 N
... of early failure in cylinders. Dynamic lip seals have a U-shaped cross section. These Beswick cylinders are rebuildable, fit most standard mountings, are ideal for long life service applications and ...
Stroke : 0.15 in
Pressure: 0 psi - 250 psi
Force: 0.14 N - 0.15 N
The 7/16″ bore air cylinder is available with 5/32″ stroke and features a spring return option. Force Factor: 0.150 in extension, 0.138 in retraction. Approximate Weight: 31g in brass. Weight will ...
Pressure: 7 bar
Force: 0.23, 0.37, 0.56, 0.76, 1.35 kN
Link clamp pneumatic screw-on with flange Material: Body aluminum. Piston steel. Version: Body black anodised. Piston hard chrome-plated Note: Screw-in pneumatic link clamps with flange find ...
norelem - Éléments standard mécaniques
Pneumatic cylinder DIN ISO 15552 standard cylinder Description Material: Cylinder tube: aluminium. Endcap: die-cast aluminium. Piston rod: carbon steel 1.0503. Piston ...
norelem - Éléments standard mécaniques
DIN ISO 21287 pneumatic compact cylinder double-acting with magnetic piston Description Material: Cylinder tube: aluminium. End cover: die-cast aluminium. Piston rod: stainless steel ...
norelem - Éléments standard mécaniques
Torque: 0.38, 0.8, 2.25 Nm
Vane rotary units Compatct Rotation 180° or 90° Special angle on request Push-rod to adjust the angle Shock absorbers
Stroke : 25 mm - 200 mm
Force: 38 N - 961 N
Speed: 0.1 m/s - 0.5 m/s
Pneumatic linear unit Cheaper Sliding on linear bearing or bushes Push up to 1200 N Stroke up to 200 mm
Stroke : 20 mm - 150 mm
Force: 400 N - 6,230 N
Speed: 0.1 m/s - 0.5 m/s
Pneumatic linear unit Fluid feed-through the shafts Rigid 4 shafts Pneumatic or hydraulic Push up to 1550 N Stroke up to 150 mm
Stroke : 5 mm - 100 mm
Bore: 20 mm
Pressure: 4 bar - 10 bar
is a simple and reasonably priced component with a lot of automation. It is torsion-proof and has a universal holder for all our suction cup models with a 1/8" or 1/4" outside fitting (SG..., SH..., SO..., and SR...). Version "V" has ...
Stroke : 0 mm - 40 mm
Force: 4.5 kN
capacity: 4,5 kN stroke: 40 mm - 120 mm depending of model DAF press cylinders are ready-to-use building blocks for plant and special machine construction. DAF press cylinders have a modular design ...
Stroke : 1 mm - 30 mm
● High-speed cylinder with integrated solenoid valve. 100 Hz maximum operating frequency. Perfect for removal of heavy defective products, etc
• 06 to 125 mm [0.236 to 4.921 in] cylinder bore. Clean equipment dust collection port type and type without dust collection port are available. A new cylinder with direct mounting for minimal size, ...
New C Series jig cylinders that provide both low pressure operation and low speed operation. Minimum operating pressure from 0.01 MPa [1 psi], minimum operating speed of 1 mm/s [0.039 in/sec]. Low friction Low sliding ...
Stroke : 25 mm - 3,000 mm
Force: 160 N - 12,270 N
ALPHA AUTOMATISMES Sarl
Stroke : 50 mm - 1,000 mm
Force: 150 N - 80,000 N
Speed: 0 m/s - 1 m/s
ALPHA AUTOMATISMES Sarl
Stroke : 50 mm - 1,000 mm
Force: 200 N - 7,900 N
Speed: 0 m/s - 1 m/s
ALPHA AUTOMATISMES Sarl
Stroke : 107 in
Bore: 2.3, 2.8, 3.4, 4.5 in
Pressure: 10 bar
... low-friction dynamic sealing has led to the development of ControlAir’s line of Diaphragm Air Cylinders. These cylinders provide virtually frictionless conversion of pneumatic ...
ControlAir
Force: 43 kN
Schmidt® Double-acting barrel units are valuable segments for the development of exceptional machines. They could be mounted freely and are outfitted with a magnet unit for discovering the comparing end position utilizing a chamber switch. ...
Stroke : 10 mm - 250 mm
Pressure: 1 bar - 10 bar
Fluid temperature: -20 °C - 70 °C
Guided cylinder type FDG with plain bearing Producer Mode of operation: Double-acting Piston diameter: 12 – 25 mm Guide: Plain bearing Construction type: Piston rod cylinder Cushioning: Elastic ...
Stroke : 25 mm
Pressure: 1.5 bar - 10 bar
Rod diameter: 32 mm
Standard cylinder SAI, ISO 15552, double-acting, Piston Ø 32, Stroke 25, G 1/8, Working pressure 1.5 - 10 bar, Temp. -20°C to 70°C These cylinders are ideal for a wide range of applications owing to ...
RIEGLER & Co.KG
... Standard Diaphragm Air Cylinders are actuators manufactured by Marsh Bellofram. These actuators are made from elastomers, engineered metal and fabrics, enabling smooth and efficient operation with no ...
Marsh Bellofram
Stroke : 150 mm - 5,500 mm
Rod diameter: 63 mm - 500 mm
The mining cylinder series includes single-acting, double-acting, and telescopic cylinders . They have been awarded many national certificates.
Shandong Mining Machinery Group Company
Stroke : 20, 10 mm
Bore: 5 mm
... to install and save room, thickness only 7mm,can stall assembly. · With sucker port and shock absorbing structure slim cylinder · Inpect part cleaning,strengthen non-rotating accuracy · The body thickness is 7mm, ...
Stroke : 0 mm - 305 mm
Bore: 32 mm - 250 mm
Pressure: 0.1 MPa - 1 MPa
Standard cylinder used in all walks of life, specifically with the lift valve on the dust removal equipment, customized according to customer's specific requirements and demand different cylinder flange ...
Force: 4,000 N
Short-stroke cylinder PM-100 | Pneumatic clamping apparatus SHG / SH pneumatic Specifications For more rapid cycles and a greater clamping force Can be supplied with already mounted ...
Stroke : 1 mm - 100 mm
Pressure: 0 bar - 5 bar
... energy saving compared to conventional pneumatic cylinders. In fact, the Eclore actuator does not generate friction and therefore does not lose “useless” energy which penalizes current solutions. The ...
Force: 4,500 N - 34,000 N
DAF direct-acting press cylinders with flange have been designed for flexible use in special machines. DAF press cylinders are equipped as standard with all advantages of modern pneumatic ...
Kao Lu FC and SC series is a pneumatic cylinder as the basic type BF cylinder, the cylinder diameter ψ40 ~ 200mm range, complete specifications. The BF separator cylinder ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining