Temperature: -40 °C - 100 °C
... PRESSURE HOSES For liquids and pressures up to PN 320 Applicable for high pressure and vacuum use Oil and waterproof inside and outside layer Range of temperature from -40 °C to +100 °C Available in any hose ...
Use: for perimeter safety guards in general and for floor-mounted columns. Material aluminium. Standard pack: 15 X 6 M.
Square tube 25x25 Use: in combination with the connection joints, to construct safety guards in general for the food and pharmaceutical sector. Material see table.
Use: for perimeter safety guards in general and for floor-mounted columns. Material AISI 304 stainless steel.
Inner diameter: 3, 4, 5 in
Delivered length: 70, 20 m
... deployed from traditional hose reel systems. The DESMI ZUH can be manufactured in various lengths to accommodate most hose sets including the longer configurations. The ZUH can be supplied with any ...
Inner diameter: 100 mm - 400 mm
Flexible inlet and outlet hose Made of Polyurethane or other materials PUR = highly wear resistant, transparent, food grade Available nominal diameters: 100 / 150 / 200 / 250 / 300 / 400 mm as well all special ...
Inner diameter: 6 mm
Outer diameter: 13 mm
Pressure: 60 bar
Elcometer’s tough 1/4” (6mm) ID Twinline Control Hose prevents tangles and trip hazards compared to using single lines with the blast hose. Durable, reliable and lightweight the Elcometer Twinline Control Hose ...
Inner diameter: 13 mm - 38 mm
Outer diameter: 28 mm - 56 mm
Pressure: 12, 15 bar
Flexible, lightweight and incredibly tough, Elcometer’s 2ply blast hose is available in 40m lengths with a working pressure of either 12 or 15bar (174 or 217psi) and a choice of hose diameters. Manufactured ...
Inner diameter: 19 mm - 51 mm
Outer diameter: 29 mm - 65 mm
Pressure: 20 bar
... and durable UV resistant wrapped outer cover, this compressed air bull hose has a pressure rating of 20bar (300psi) with a 3:1 safety factor. The Elcometer Compressed Air Bull Hose is constructed for ...
Inner diameter: 12 in - 22 in
Suction hose . Suction hose with steel spiral for connection between the vacuum pump and vacuum clamping system . Accessory to vacuum clamping systems Use :ClampingAutomation
... connection between the sandblasting cap and the air filter BAF. 1. Special thick-walled hose is made of non-toxic materials. 2. The thick wall can prevent the hose from bending and squeezing.
Inner diameter: 4.8 mm - 50.8 mm
Outer diameter: 11.8 mm - 64 mm
Pressure: 580 psi - 3,630 psi
SAE100R1 AT/DIN EN 853 1SN Inner tube: Oil resistant synthetic rubber. Reiforcement: one high tensile steel wire braid. Cover: abrasion and weather resistant synthetic rubber. Temperature range: -40°C~100°C
Inner diameter: 19 mm - 63 mm
Outer diameter: 32 mm - 77 mm
Pressure: 4 bar - 21 bar
Recommended for hydraulic applications where a tighter bend radius is needed, such as marine, forestry, mining and construction. Inner hose: synthetic, oil resistant rubber. Cover: resistant to oils, abrasion and weather condition. Reinforcement: ...
Inner diameter: 6 mm - 32 mm
Pressure: 125 bar - 350 bar
Temperature: -40 °C - 100 °C
OMG—Gibogini is able to provide special rubber pipes, suitable for the transit of acidic and basic electrolyte solutions, used in galvanic and chemical plants. Specifications: *Chemical resistance *High technological content; pipes ...
Inner diameter: 0.4 mm - 10 mm
Outer diameter: 3 mm - 14.6 mm
Delivered length: 1 m
... catalyst system 5. Great electrical insulation Silicone tube dielectric properties, especially at high temperatures, the dielectric properties greatly exceed the general organic rubber Silicone tube ...
Inner diameter: 9.5 mm
Outer diameter: 16.5 mm
Delivered length: 100 m
High Pressure Oil-Resistant Rubber Hose Four Colors: Black, Red, Green, Blue, Yellow Water Flow Indicator: Protect the Machine.
Inner diameter: 32 mm
Sandblasting hose pipe application: It is suitable for sandblasting rubber hose for rust removal on metal surface. Common application areas are shipbuilding, machining, spraying industry, etc. People familiar with the ...
Inner diameter: 7 mm - 50 mm
Outer diameter: 10 mm - 60 mm
Delivered length: 6 m
Construction tubes are intended for assembly using clamps and can be combined with these to build tube constructions of all types. The tubes are available from stock in the standard lengths indicated in the table. ...
Inocon GmbH
Inner diameter: 9 mm - 16 mm
Outer diameter: 8 mm - 20 mm
Delivered length: 100 mm - 400 mm
Retaining rods and retaining tubes are turned and chamfered starting from round stainless steel solid profiles for diameters and from welded and polished stainless steel round tubes for diameters The square versions are made from ...
Inocon GmbH
Delivered length: 100 m - 400 m
Retaining tubes RK are made from drawn and natural color anodized aluminum square tubes by sawing. Retaining tubes are intended as accessories for use with clamp mountings, and the outer dimensions are matched accordingly. Retaining ...
Inocon GmbH
Pressure: 300 bar
The right hose for the right fluid, we manufacture with the desidered lenght and complete with fittings.
Corrugated plastic pipe for the installation of the temperature sensor diameter 16mm
Warm-On
Inner diameter: 50 mm
Arm, Ø 50 mm x 650 mm Long with Round Funnel, Power Adapter
Porous ceramic tubes are composed by the distributed evenly open pores which is interconnected by shape like arch , when the fluid through these pores,the suspended matter, colloidal particles, organic molecules are trapped, adsorbed ...
Sampling Systems can offer a contract tube manufacturing service as part of our SteriWare range. All the tube is manufactured under class 10,000 cleanroom conditions which means it is ideal for pharmaceutical ...
Delivered length: 10 m
Kit flexible hoses for hydraulic/pneumatic connection between Sondatec 1.0+Outec 1.0 to Cabtec, composed by: 3x1/2”FD-F90 + 1x3/8"FD-F90 + 1x1/4"FD-FD, BSPP standard. Protected inside a galvanized steel wire braided with ...
Delivered length: 7 m
Kit flexible hoses for hydraulic/pneumatic connection between Sondatec 2.0+Intec 1.0 to Cabtec, 2x1/2"FD-F90 + 1x3/8"FD-F90 + 2x1/4"FD-FD, BSPP standard. Protected inside a galvanized steel wire braided with nichel plated ...
... two pipes can be connected together easily by flanges. Polyethylene dredging pipe produces with common standards of polyethylene pipe and these two pipes have flange head. Polyethylene flanges are provided ...
Temperature: -25 °C - 80 °C
... UV and Ozone. 2. Wear indicator layers can be implemented in the dredge hoses which transport abrasive media. 3. A single foam floating layer prevents water absorption. The hose emergence above the ...
Inner diameter: 300 mm - 1,000 mm
Pressure: 3.6 MPa - 7.5 MPa
Delivered length: 1 m - 5 m
RELONG’s Dredging Rubber Hose features “customized” heavy-duty, wear-resistant constructions employing the finest grades of natural and synthetic rubber and fabric. And engineers and manufactures the complete hose ...
Inner diameter: 10 mm - 32 mm
Outer diameter: 19 mm - 48 mm
* Reinforced latex hose in 15mm, 19mm and 25mm * Available in rolls of 50 and 25 meters. * Transparent green color * Produced with non-toxic material, suitable for food contact. * Hose with anti-twist ...
Inner diameter: 14, 18, 25 mm
* Latex hose in 14mm, 18mm and 25mm * Available in rolls of 50 and 25 meters. * Transparent green color * Produced with non-toxic material, suitable for food contact. * Hose with anti-twist mesh, ...
Please specify:
Help us improve:
remaining