PRAHER 2-channel valves

DN: 0.25 in
Pressure: 3 bar - 10 bar
Temperature: -10 °C - 50 °C

... the adjustment needle valve. The piston opens the main valve when the downstream side of the valve reaches approximately 60% of the supply pressure. The ramp up time to reach the switch-over ...

DN: 5 mm
Pressure: 0.5 bar - 10 bar
Temperature: 5 °C - 75 °C

2/2-way, latching cartridge valve with a nominal orifice DN 5 with a mechanical valve actuation. By manual operation, at a push of a button so to speak, the valve ...

Pressure: 0 psi - 125 psi
Temperature: -20 °F - 160 °F
Flow rate: 9, 19, 10, 222 ft³/min

... toggle and momentary toggle. The internal poppet design of this 2-way valve contributes to a long product life. •Input ports: 1/8 NPT (F), 1/4 or 5/32 Push-in •Output port: 1/8 NPT (F), 1/8 NPT, ...

DN: 32, 40, 50 mm
Pressure: 16 bar
Temperature: -10 °C - 180 °C

Parker's 1/2" Angle Seat Valve is actuated by a pneumatically driven piston and is capable of handling slurry solutions with particles or corrosive solutions at high temperature up to 180°C, operating ...

Pressure: 350 bar
Temperature: -20 °C - 50 °C
Flow rate: 320 l/min - 1,900 l/min

... Parker’s 2-way high response valves series TDP are particularly suitable for demanding controlled and closed loop applications where high flow has to be precisely controlled at highest dynamics. The ...

DN: 0.5 in - 3.15 in
Pressure: 700 bar
Temperature: -40 °C - 150 °C

Parker's Isolation Ball Valves are designed for use on Air Conditioning and Refrigeration units. They ensure positive shut off refrigerant flow in either flow direction, even during system evacuation. The Sporlan Ball ...

This pilot integrates all principal functions of a 2-Way control circuit in a single assembly. It is a direct acting pilots valve, actuated by a pressure responsive diaphragm, which tends to reach equilibrium ...

DN: 0.25, 0.5 in
Pressure: 40 bar
Temperature: -40 °C - 100 °C

... powered mass flow meters red-y compact series. Tightly Closing Valves The valves are tight-closing Different Device Setups The valves are available as straight valves ...

DN: 15 mm - 50 mm
Pressure: 40 bar
Temperature: -30 °C - 140 °C

... (in relation to shaft) Materials Case : brass (DIN EN 12165, CW617N) Valve ball : stainless steel (EN 10088-2) Valve shaft : stainless steel (EN 10088-2) Valve ...

DN: 0.25 in - 1.25 in
Pressure: 0 bar - 350 bar
Temperature: -20 °C - 100 °C

Two or three ways flow regulators, with or without compensated function, unidirectional or bidirectional. Compact design and excelent flow regulation. Flow rate from 1 to 100 l/min. Max working pressure 350 bar. Cartridge style.

DN: 10 mm - 50 mm
Pressure: 25 bar
Temperature: 0 °C - 120 °C

... max. Δp over the valve Versions with and without pressure measurement nipple The valve is closed when the spindle is moved in Closing against the pressure Slight adaptation of the proven SAUTER actuator ...

DN: 15 mm - 65 mm
Pressure: 2 bar - 16 bar
Temperature: -10 °C - 180 °C

... - port G1/8 2. electrical - 0-10 V, optionally 4-20 mA, supply 24 V DC ± 10%, - power consumption 150 mA/3.6 W - analog position feedback signal 0-10 V / 4-20 mA (after automatic balance) Control_element: 2-port/2-way ...

DN: 13 mm
Pressure: 350 bar

... body ball valves designed for use as on/off devices for hydraulic applications with standard and extended SAE mating flange connectors according to ISO 6162-1, 6162-2 and SAE J 518 C. Ball Valve ...

Pressure: 100 psi

... is designed for high pressure service up to 100 PSIG. The swing tube is available in several styles: 1) Abrasion resistant; 2) Non-abrasion resistant; and 3) Food grade. All the moving parts are in a completely enclosed ...

DN: 20 mm - 110 mm
Pressure: 16 bar

Electrically or pneumatically actuated valves automate flow control, offering several advantages over manual valves, in cases like: Remote location of the valves. Information ...

DN: 1.8 mm
Pressure: 1 bar - 8 bar
Temperature: 5 °C - 180 °C

Features ・This solenoid diaphragm valve employs a unique mechanism to absorb the dimensional changes of the plastic body caused by temperature changes. No leakage with high temperature fluids. ・Most suitable for the ...

DN: 0.5 in
Pressure: 250 psi
Temperature: 71 °C

AMOT 2410 diaphragm operated control valve is a 2-Way, vented control valve suitable for air and most gaseous and liquid fuels applications. Features and Benefits Rugged, Cast Aluminum ...

DN: 100 mm - 400 mm

Two-way valves with inlet collar, symmetrical, hand-operated Press formed and fully seam welded, complete with lipped ends for pull ring connection. Ideally used within vertical bulk goods pipelines ...

DN: 82.6 mm
Pressure: 420.6, 68.9, 482.6, 965.3 bar
Temperature: -54 °C - 204 °C

RELIEF VALVE WITH ANTICAVITATION CHECK VALVE, DIRECT ACTING POPPET The RVCV56-20X is a screw-in, cartridge, direct acting poppet relief valve with reverse flow check valve. Operation This ...

DN: 40 mm - 100 mm

The flywheel valves are made primarily of aluminum alloy in a heat-treated, fire engine red finish. The other major components are made of stainless steel and galvanized brass. Some of the major characteristics of these ...

DN: 15 mm - 100 mm
Pressure: 16 bar - 25 bar
Temperature: -20 °C - 220 °C

Field Reversible from Normally Closed to Normally Open, or Normally Open to Normally Closed Type. Design Standard: ASME B16.34 Fluid: Air, Water, Steam, Gas, etc. Temperature: -20°C to + 80°C ACTUATOR: Pneumatic diaphragm type Multi Spring ...

Pressure: 100, 210 bar

2-Way Ball Valve (FxF) Working Pressures: 100 | 210 bar (1500 | 3000 PSI)

DN: 0 in - 3 in
Temperature: 0 °F - 150 °F

Actuated Plastic Ball Valves Electric Series 94 on Type-21 Ball Valve Ball valves up to 3" can be actuated with the Series 94 Electric Actuator. The Series 94 actuator is a basic electric ...

... has clumped together in storage, dust formation, ensuring exact/calibrated quantities etc. Product range ■Flat slide valves ■Chutes ■2-way switches Properties/variants Applications For flowing or pourable ...