PRAHER manual valves

DN: 0.5 in
Pressure: 2 bar - 16 bar
Temperature: 1 °C - 70 °C

Drain Valve Timer Type - Series CTD The CTD valve series represents the ultimate in valve performance. Decades of experience of valve manufacturing have allowed us ...

DN: 2 in - 24 in
Temperature: -29 °C - 200 °C

... Trunnion Ball Valve Temperature: - Normal Temperature Trademark: - SOLID Transport Package: - Plywood Case Type: - Trunnion Ball Valve Trunnion mounted ball valve usually ...

DN: 10 mm - 200 mm
Temperature: -30 °C - 240 °C

... Electric Vacuum (Pressure) Ball Valve Description: Gud series electric vacuum (pressure) ball valve adopts rotary electric and electronic regulating valve driving device Gud series ...

Suction Valve Cconnects the tank and the piping. Attach this accessory to the chemical tank outlet to easily and reliably connect the tank and the piping. The built-in strainer also prevents the entry of debris.

DN: 20 mm - 25 mm
Pressure: 13 bar
Temperature: -30 °C - 80 °C

... quickl valve can be installed in the piping and some important position such as outlet of compressor and upstream of pneumatic tools .Good for the separation ,adjustment and maintenance . Quick install . Provide ...

DN: 6 in - 12 in

... characteristics and can be used as a throttling manual control valve. By simply turning the handwheel, operators can fine tune the valve position to maintain a constant rate of flow. ...

... the sleeve chamber, allowing the valve to open. MANUAL CONTROL All valves are equipped with a three-way manual selector valve. Manual ...

DN: 1.5 in
Pressure: 16 bar
Temperature: -40 °C - 250 °C

The Perolo ND40 ATCO FULL BORE self-contained ball valve is designed to be used as an air inlet or as a fluid inlet/outlet valve. With its MAWP of 16 bars, this valve exceeds T22 requirements ...

DN: 2 in

... Caps, Valves and Ancillary Fittings. Ezi-Dock™ products can be supplied in HDPE and with Viton O Rings in order to be compatible with certain chemical compounds or products that require a high-temperature fill. The ...

DN: 40 mm - 300 mm
Pressure: 10 bar
Temperature: 150 °C

Execution: metal seat inside stem (non-rising) non-rising handwheel Materials: body and bonnet: GJL-250 body- and wedge seats: 1.4307 stem: 1.4006 Flange connection: / Face-to-face: DIN EN 1092-2 Form B Face-to-face DIN ...

DN: 0.25 in
Pressure: 414 bar
Temperature: -40 °C - 93 °C

316 SS, BF Series Ball Valve, CNG fast-fill, PEEK Seats, 1/4 Female NPT, 6000psig(414bar), -40°F to 200°F(-40°C to 93°C), 0.75 Cv, 3-way, 90° actuation, Low-temperature Service Body Material316 Stainless Steel Port ...

DN: 20 mm - 63 mm
Pressure: 10 bar

... Unplasticized polyvinyl chloride (PVC-U). • Hydraulic test complying with EN 917 : Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leak tightness.

DN: 177.8, 76.2 mm
Pressure: 0 bar - 30 bar
Temperature: -20 °C - 80 °C

MANUAL EMERGENCY VALVE VEM CARTRIDGE VALVE FOR EMERGENCY MANUAL ACTING The manual emergency valve VEM is a 2 ways / 2 positions ...

DN: 16 mm
Pressure: 0 mbar

Category - Angle valve, manual, KF, aluminium Actuation - manual via hand wheel Item description - KF Angle Valve, DN16 manually operated materials: ...

DN: 25 mm - 250 mm
Pressure: 16 bar
Temperature: -40 °C - 196 °C

... industrial control valves, has a full range of industrial control valve solutions that continue to provide the most competitive control valve products to customers worldwide. We provide ...

DN: 2, 1.5, 1.25, 1 in
Pressure: 300 psi

• Test and drain valves are compact 3-position ball valves with drain orifice having k-factor 5.6 or 4.2 (optional) • 3-positions consist of OFF, TEST and DRAIN • Brass construction (ASTM B584) • Integral ...

DN: 15 mm - 800 mm
Pressure: 1.6 MPa - 25 MPa

... is good 　　◎It can be used on ring network pipeline whose medium flows towards two directions 　　◎Structure length is short 　　Valve material 　　TA1,TA2,TA10,Gr C-2,Gr C-3,Zr702C,Zr705C,N6,N200,CZ-100,M35-1,N06600,CY40,N12MV,CW12MW,CN7M,4A,6A,HK30,etc. 　　Performance ...

DN: 50 mm - 1,200 mm
Pressure: 1.6 MPa - 160 MPa
Temperature: -46 °C - 600 °C

GB Gâte Valve is suitable for the nominal pressure (CL150-CL2500),, chemical, thermal power plant and other conditions of the pipeline, eut off or connect the pipeline medium. Main material: carbon Steel, stainless ...

Pressure: 250 bar
Temperature: -30 °C - 120 °C
Flow rate: 42 l/min

... be locked in place. · Positive shut-off Operation The valve varies flow restriction by adjusting needle in or out and will shut off when fully closed. These Valves will meter flow ...

DN: 0.5 in - 36 in

... side-entry ball valve is the most common and popular design. Given its great modularity, SRi can manufacture any side-entry ball valves with special options. In case of maintenance operation, all ...

FEATURES: -Unique sealing arrangement for extended life of valve. -Heat resistance hand wheel. -Wear and erosion resistance for most of the fluids. -Class VI leakage valve. -Use ...

DN: 15 mm - 300 mm
Pressure: 150, 300 psi

... of MNC 3 & 4 Way Ball Valve. This Ball Valve is available in sizes that range from 15 MM to 300 MM. Sturdy constructions, long service life, fine finishing are some of the main factors of our 3 & 4 Way ...

Pressure: 0 bar - 7 bar

... microfluidic valve for injection or selection of up to 10 different fluids or chips. The flow is bidirectional in the valve. The device can be used as a selector or as a distributor for either multiplexing ...

DN: 15 mm - 200 mm
Pressure: 16, 25, 40, 64 bar
Temperature: -196 °C - 450 °C

Electric Actuated Globe Control Valve Body: Cast Steel, Cast Iron, Ductile Iron, SS304, SS316, SS316L Bonnet: Cast Steel, Cast Iron, Ductile Iron, SS304, SS316, SS316L Lining Material: PO, PE, PP F46, F4, PFA Bellows ...

DN: 12.7 mm - 203.2 mm

... Series is a two piece, full port, flanged end ball valve with an ISO 5211 compliant direct mount actuation pad. The 10E10 is available in sizes ranging from ½” to 8” with ASME Class 150 flanges. Valve ...