PREVOST piping

Outer diameter: 0.25 in - 10.75 in
Temperature: -200 °C - 450 °C

Mating Del-Seal™, ISO and ASA flanges available UHV rated to 1x10-10 Torr High temperature rated to 450ºC Standard matte finish 304 stainless steel 1/4" through 10-3/4" O.D. sizes Saw cut and deburred Custom ...

Pressure: 13.8, 12.1 bar

TYCO Model FH-1 Flexible Hose can be used in wet sprinkler systems between the branchline and sprinkler when installed in accordance with NFPA 13, 13D, and 13R. Flexible Hose provides a unique sprinkler ...

Inner diameter: 600, 560, 500, 450 mm

Tender specification PVC HOKA PVC pipe of sheet material with smooth ends plastic pipe round for use in exhaust system, connection by welding process. Outside diameter on the basis of DIN 8062, manufacturing ...

Inner diameter: 20 mm - 63 mm
Pressure: 12 bar

2025B - MDPE Pipe 20mm SDR11 12 Bar X 25m Coil Black 2025BU - MDPE Pipe 20mm SDR11 12 Bar X 25m Coil Blue 2050B - MDPE Pipe 20mm SDR11 12 Bar X 50m Coil Black 20100B - MDPE Pipe ...

Inner diameter: 6 mm - 51 mm
Outer diameter: 15 mm - 67.3 mm
Pressure: 80 bar - 400 bar

Inner diameter: 3 in - 20 in
Temperature: -65 °F - 300 °F

Single-ply black neoprene coated polyester fabric hose mechanically crimped in a continuous process with a non-marking thermoplastic rubber clip cover. Fabric is locked around a coated steel wire by a metal strip ...

Inner diameter: 102 mm - 999 mm
Outer diameter: 124 mm - 1,020 mm
Pressure: 10 bar

The ANFRAY's ALI BOAT SPL10 series hoses are very flexible and are mostly used in food industry for different sanitary processes. They can withstand pressures up to 10 bar, are completely sanitized, and are therefore ...

Inner diameter: 38 mm - 152 mm
Outer diameter: 47 mm - 169 mm
Pressure: 10 bar

Application: General heavy-duty suction and discharge of water and mild water borne slurries. Commonly used on centrifugal and diaphragm pumps throughout a wide range of industries. Can be used with waste water with 5-10 pH. Working pressure: ...

Inner diameter: 9.5 mm - 50.8 mm
Pressure: 0 Pa - 1,600,000 Pa
Temperature: -40 °C - 100 °C

Lining : Steam and Heat resistant EPDM rubber tube Reinforcement : One High tensile steel wire braid. Cover : Heat resistant Outer Cover

Inner diameter: 50 mm - 203 mm
Outer diameter: 57 mm - 216 mm
Pressure: 0.01 bar - 0.4 bar

J 5-2 TPV MEMORY HOSE The cost effective solution with a wide range of applications in the vehicle workshop. Can also be used in under floor systems. I.D. 50-203 mm Temperature Range: exhaust gas temperatures to +200°C ...

Beer and wine multi in one hose for Bars Features Ultra smooth PU hose does not impart taste or odor Special high quality Special anti-abrasion cover Specially formulated easy slide exterior ...

Outer diameter: 48.3 mm

Hot Dip Galvanized Pipe 1、 Carried Standards: GB/T 3091-2015 Welded Steel Pipes for Low Pressure Liquid Delivery GB/T13793-2016 Steel pipes with a Longitudinal Electric (Resistance) Weld 2、 Application: Delivery ...

Inner diameter: 4 mm - 12 mm
Outer diameter: 2.5 mm - 9 mm
Pressure: 50 psi - 200 psi

Polyethylene is the most commonly used tubing due to its flexibility, wide range of chemical resistance and lower cost. Nycoil uses high quality Linear Low Density Polyethylene material (LLDPE). LLDPE has a much higher resistance to ...

Outer diameter: 0.25 in - 24 in

... used mostly to transfer substances which can flow such as liquids and gases, slurries, powders, masses of small solids. The pipe is far firmer per unit weight than solid components. This can also be used for structural applications.

Inner diameter: 6, 8 mm
Outer diameter: 9, 12 mm
Pressure: 0 bar - 3 bar

... HAKKO Original Fittings・・・By using our original fittings, you can avoid accidents which are caused by incorrect choices of hose and fittings. Food Sanitation・・・E-SJV conforms to the Food Sanitation Standard No.370 ...

Inner diameter: 16 mm - 500 mm
Pressure: 6, 10, 12.5, 16, 20 bar

... pipes for the construction of pipeline systems for fluids under pressure both for underground and above ground application. The different types of connection are: pre-inserted rubber ring (inserted in production when ...

Outer diameter: 20 mm - 200 mm

Saleplas is a company devoted to the manufacture of polyethylene elements for the conduction of fluids.Among those products, it is worth mentioning the Pressure Pipes and the Column Pipes for Submersible Pumps, both made of polyethylene ...

Inner diameter: 21.34 mm - 219.1 mm

Inner diameter: 19 mm - 51 mm
Outer diameter: 30 mm - 67 mm
Pressure: 20 bar

Inner diameter: 4 mm - 16 mm
Pressure: 4 bar - 69 bar
Temperature: -20 °C - 65 °C

... light blue PVC, with high resistant reinforced polyester fiber. Gas and welding Cut spray, gas and welding hoses for protection, feeding tube and fluid systems, assembled or coils.

Inner diameter: 20, 25, 38, 50, 60 mm
Outer diameter: 27, 72, 33, 48, 60 mm
Pressure: 8, 10 bar

Structure : Flexible hose with inner layer of thermoplastic anti-odor barrier, and very soft PVC wall, reinforced with shock-resistant PVC spiral. Applications : Designed for high flexibility medium duty suction and ...

Inner diameter: 4.65 mm - 26.62 mm
Outer diameter: 7.32 mm - 30.5 mm
Pressure: 80 bar - 276 bar

Speed Flow is manufactured from virgin PTFE resin with a double ASIS 304 stainless steel, high tensile braid to suit hydraulic fittings in high pressure applications.

Inner diameter: 18 mm - 300 mm

Internal Diameter Accuracy : H7, H8, H9 Internal Roughness : Ra 0.2μm ~ Ra 0.8μm Straightness : 1-1.2/1000mm Standard Length : 3M~11M Special Length : 12M Internal Diameter : 18Ø~ 300Ø Material : JIS STKM13C, DIN ST52, SAE1020 or Mechanical ...

INDUSTRIAL HOSE BUILDERS ON RIGID MANDREL Throughout all its history the company “Techprom” has accumulated a wide experience in rubber hoses manufacturung. At the moment, we can supply not only the ...

Inner diameter: 8 mm - 50 mm
Outer diameter: 9 mm - 51 mm
Temperature: -20 °C - 105 °C

... tube-shaped pliable spiral tube that is fitted with cables, conductors, tubes and wire assemblies. It is characterized by its optimum protection agianst mechanical wear and is ideally installed after cables have been ...