Prominent intrinsically safe pumps

Flow: 0 l/min - 4,656 l/min
Pressure: 0 Pa - 2,000,000 Pa

... function as a process and/or CIP pump, which helps in reducing maintenance time and costs, with the advantage that it is suitable for abrasive products like toothpaste. It can handle air up to 60%, which prevents pump ...

Pressure: 0 psi - 1,500 psi

Python pumps are ideal for applications that require a pump to operate in hazardous locations and can run off regulated natural gas or compressed air. These pumps have the lowest out-of-pocket ...

Flow: 6.7 l/min
Pressure: 16 psi
Fluid temperature: 0 °C - 50 °C

... /Benefits: • The pump with patented valve design is optimized to provide best-in-class efficiency/size ratio especially for low vacuum applications. Low power consumption enables longer battery life for ...

Flow: 0.1 m³/h - 6,700 m³/h
Pressure: 16 bar
Head: 0.1 m - 3.5 m

Wet-installed horizontal propeller pump with submersible motor, equipped with direct drive or spur gear, ECB propeller with rigid, fibre-repellent blades, bolt-free connection to the discharge pipe. Explosion-proof version ...

Flow: 2,600 m³/h
Pressure: 10 bar
Head: 80 m

... efficiency. ANDRITZ wet installed sewage pumps from the SW series are a cost-effective solution for all types of sewage transportation. These channel impeller pumps are single-stage submersible sewage ...

Flow: 3 m³/h
Pressure: 18, 45 bar
Fluid temperature: 0 °C - 200 °C

... Series Lubrication pumps are based on the proven internal gear principal, but have been enhanced in response to demands from our OEM customers for a pump that offers advanced features which make installation ...

Flow: 480 l/min
Pressure: 8 bar
Fluid temperature: 100 °C

Diaphragm pump in aluminum series AAB-112 with membranes in EPDM, balls and seats in acetal FLUIDSFRESH OIL | WATER | DIESEL FUEL SECTORSAERONAUTIC | AGRICULTURE | AUTOMOTIVE | LUBE TRUCK AND INDUSTRIAL VEHICLE | ...

Flow: 4.7 l/s
Head: 57 m
Power: 5.5 kW

... solutions ensure peak hydraulic efficiency and performance with the greatest reliability. Also available in an explosion proof version conforming to ATEX II 2G Exd IIB T4.

Flow: 16 l/h - 300 l/h
Pressure: 5 bar - 14 bar
Power: 0.18 kW

The metering pumps ST-D series are driven by an electric motor, the dosage takes place thanks to a PTFE membrane. The ST-D series pumps make their robustness and reliability their main characteristic. • ...

Flow: 1 m³/h - 300 m³/h
Pressure: 1 bar - 16 bar
Head: 5 m - 70 m

... sealing and the pumps are also equipped with reliable bearing bracket, especially developed to be suitable even under heavy duty service. Design: UCL range shares the same hydraulic design with the UTN series (magnetic ...

Flow: 0 m³/h - 2,550 m³/h

... mechanical sealing • High interchangeability of parts • Heavy duty shaft and bearings • High efficiency pump hydraulics • Heavy duty and durable vacuum pump • Reduced maintenance • ...

Flow: 11 l/min - 17 l/min
Pressure: 2 bar - 8 bar
Head: 0 m - 80 m

CUBIC 15 diaphragm pumps are characterized by exceptional performance, power and strength, making them ideal for pumping liquids with high apparent viscosity even if containing suspended solids. Especially suitable in ...

Flow: 1 l/s - 90 l/s
Head: 2 m - 30 m
Power: 5 kW - 18 kW

... products range (about 856 among pumps and mixers) includes different models according to a variety of models,from 0,5 kW to 350 kW, 2-4-6-8-10-12 poles (50Hz and 60 Hz). CONSTRUCTION DATA Submersible electric pumps, ...

Flow: 700 m³/h
Head: 130 m
Power: 200 kW

Anti-corrosion standardized horizontal centrifugal pumps type PHN Construction Single-stage horizontal centrifugal pump, single, in conformity to EN 22858 / ISO 2858 standards Sold either with unfitted ...

Flow: 1.2 l/min - 8 l/min

Air-powered drive is ATEX Zone 2 approved; rated to EEX II 3 G c IIC T6 (Drive only, pump head is not ATEX approved: order 77601-80 for ATEX approved ...

Flow: 0 l/h - 1,000 l/h
Pressure: 8 bar

MIA Series Mechanical Diaphragm Pump Flow rate: 0-1000 l/h Pressure: up to 8 bar Accuracy: +/- 2% of rated flow from 10 to 100% of rated flow Mechanically actuated PTFE diaphgram Safe: leak ...

Flow: 0.25 l/s
Fluid temperature: -20 °C - 40 °C
Height: 257 mm

Hand-operated piston pump for distribution out of drums and small containers. Description For diesel, fuels (AI-III), heating oil EL/L, low viscosity mineral oils, radiator antifreeze (undiluted) piston ...

Flow: 0 m³/h - 440 m³/h
Pressure: 0 bar - 24 bar

The Compact C Range progressing cavity pump has been manufactured by Mono to offer you a transfer pump designed to fit into compact spaces, whilst reliably performing ...

Pressure: 0 bar - 25 bar

Paint pumps / Varnish pumps Gear pumps or Rotary lobe pumps Steimel pumps for paints and varnishes are used in machines and plants for the production ...

Flow: 130 m³/h
Pressure: 36 bar

Horizontal direct coupled Cryogenic Pumps CS and CBSD pumps are typically used in intermittent duty for road tanker loading.

Flow: 50 l/min

... relief valve, built-in bypass valve and 2 m – cable with alligator clamps for battery connection. The pump is constructed in accordance with directive ATEX 94/9/EC – IECEx (group II – category 2 – G Ex d IIA T4 Gb).

Flow: 5 m³/h - 3,500 m³/h
Pressure: 20 bar
Head: 5 m - 210 m

... according to ISO 1940-1 G6.3. • Pump and motor are coupled on a rigid frame by using elastic or ATEX certificated couplings. • Pump shaft, impeller, bearing housing and other components can ...