Flow: 16 l/h - 300 l/h
Pressure: 5 bar - 14 bar
Power: 0.18 kW
... The metering pumps ST-D series are driven by an electric motor, the dosage takes place thanks to a PTFE membrane. The ST-D series pumps make their robustness and reliability their main characteristic. • Frequency: ...
Etatron D.S.
Flow: 1 m³/h - 300 m³/h
Pressure: 1 bar - 16 bar
Head: 5 m - 70 m
... sealing and the pumps are also equipped with reliable bearing bracket, especially developed to be suitable even under heavy duty service. Design: UCL range shares the same hydraulic design with the UTN series (magnetic drive pumps) ...
CDR Pompe
Flow: 0 m³/h - 2,550 m³/h
... mechanical sealing • High interchangeability of parts • Heavy duty shaft and bearings • High efficiency pump hydraulics • Heavy duty and durable vacuum pump • Reduced maintenance • Excellent flow ...
Flow: 11 l/min - 17 l/min
Pressure: 2 bar - 8 bar
Head: 0 m - 80 m
... CUBIC 15 diaphragm pumps are characterized by exceptional performance, power and strength, making them ideal for pumping liquids with high apparent viscosity even if containing suspended solids. Especially suitable in reduced spaces. ■ ...
DEBEM SRL
Flow: 0.7 l/h - 1,128 l/h
Pressure: 4 bar - 370 bar
Power: 0.19 kW - 0.75 kW
... dosing pumps for continuous operation under hard process conditions. This is a positive return pump with packing plunger head. A non-loss-motion mechanism, with variable eccentric regulation produces a high accuracy ...
Flow: 50 l/min
Pressure: 70 bar - 5,000 bar
... The P-Series of air-driven pumps reduce maintenance downtime and provide reliability for pumping various liquids with pressure up to 72,500 psi (5,000 bars). The pumps operate with an automatic reciprocating differential ...
Flow: 20 l/min
Pressure: 30 psi
... The Mini Dia-Vac® is an excellent choice when your application requires an extremely durable diaphragm pump. The mini Dia-Vac with its special capacitor run feature, large bearings and fan allows for ...
Air Dimensions Incorpor.
Flow: 0.9 m³/h - 36 m³/h
Pressure: 7 bar
... Almatec E-Series State-Of-The-Art Plastic AODD Pumps The development of the E-Series was based on the extensive experiences with the proven pump models. The solid design with distinctive wall thicknesses, the flange ...
ALMATEC Maschinenbau GmbH
... hundreds of installations. Materials selected for TF-TOP DIMACO pumps are compatible with hydrocarbons, solvents and corrosive supernatants; TF-BOTTOM is suitable for leachate and DNAPL. Pumps can be fitted with customized ...
Flow: 0 m³/h - 400,000 m³/h
... – sealed components protect oil purity
Typical applications
Lubretec pneumatic oil
pumps are selected where
safe, efficient lubricant handling is required:
- Automotive workshops –
Flow: 0 l/min - 900 l/min
Head: 0 m - 70 m
Fluid temperature: 0 °C - 95 °C
... Boxer pneumatic diaphragm pumps are characterised by high performance, high power and robustness, which makes them suitable for pumping fluids with apparent very high viscosity. The anti-stall pneumatic circuit guarantees safe ...
Flow: 400 l/min
Head: 32 m
Power: 0.18 kW - 3 kW
... with the medium »»easy to maintain (wear parts can be changed swiftly) »»universally applicable, quiet and compact »»available as explosion proof version for combustible environments Model article ...
SCHMITT - Kreiselpumpen GmbH & Co. KG
Flow: 71, 97 l/min
Head: 11, 20 m
Power: 550 W
... and the pump tube acc. directives ATEX 2014/34/EU are required. The handy and powerful device can be used as a drive for the ATEX certified sealless pump tubes made of stainless steel ...
Dr. Jessberger GmbH
Flow: 0.5 l/min
Pressure: 80,000 Pa - 120,000 Pa
Length: 410 mm
... The AGH1000B sampling pump is a hand-held gas sampling pump that is mainly used to assist the gas collection of portable gas detectors. With the intrinsically safe design, it can be used ...
Flow: 0.25 l/s
Fluid temperature: -20 °C - 40 °C
Height: 257 mm
... Hand-operated piston pump for distribution out of drums and small containers. Description For diesel, fuels (AI-III), heating oil EL/L, low viscosity mineral oils, radiator antifreeze (undiluted) piston pump Single-acting Scope ...
Flow: 4.9 m³/h - 235.7 m³/h
Pressure: 4 bar - 24 bar
Power: 2.2 kW - 45 kW
... carried out on-site without the need to remove the pump from its installation. This significantly reduces downtime and optimizes the productivity of industrial operations. The PCM EcoMoineau™ MX pump is the ideal choice ...
PCM
Flow: 700 m³/h
Head: 130 m
Power: 200 kW
... Anti-corrosion standardized horizontal centrifugal pumps type PHN Construction Single-stage horizontal centrifugal pump, single, in conformity to EN 22858 / ISO 2858 standards Sold either with unfitted cam shaft, ...
CEPIC
Flow: 0 l/h - 1,000 l/h
Pressure: 8 bar
... MIA Series Mechanical Diaphragm Pump Flow rate: 0-1000 l/h Pressure: up to 8 bar Accuracy: +/- 2% of rated flow from 10 to 100% of rated flow Mechanically actuated PTFE diaphgram Safe: leak free operation, no ...
FIMARS
Flow: 52, 130, 375, 715 l/min
Pressure: 8 bar
Fluid temperature: -40 °C - 70 °C
... ASTRAsolid (DDS) pumps share the same constructive and performing advantages as ASTRAevo pumps: a fast pneumatic exchanger increased unloading systems for performance optimization (without interfering on air consumption), ...
Argal Pumps
Flow: 5.5 l/h - 1,000 l/h
Pressure: 10, 40 bar
Power: 0.18, 0.25, 0.37, 0.55, 0.75 kW
... with a protection degree of IP55. ATEX version also available Multiple combinations of pump head and motor power allow operators the chance to select the optimal solution to the specific application Self-standing pump ...
Flow: 0 m³/h - 440 m³/h
Pressure: 0 bar - 24 bar
... The Compact C Range progressing cavity pump has been manufactured by Mono to offer you a transfer pump designed to fit into compact spaces, whilst reliably performing to the maximum duty ...
Mono Pumps
Pressure: 0 bar - 25 bar
... Paint pumps / Varnish pumps Gear pumps or Rotary lobe pumps Steimel pumps for paints and varnishes are used in machines and plants for the production of pasty and ...
Gebr. Steimel
Flow: 25 l/min
Pressure: 6 bar
... 51114 Pneumatic 1:1 – piston pump, suitable for the suction and the transfer of petrol. The pump is equipped with an earth cable to enable an electrostatic discharge and is constructed in accordance with directive ATEX ...
Ompi Srl
Flow: 5 m³/h - 3,500 m³/h
Pressure: 20 bar
Head: 5 m - 210 m
... according to ISO 1940-1 G6.3. • Pump and motor are coupled on a rigid frame by using elastic or ATEX certificated couplings. • Pump shaft, impeller, bearing housing and other components can be dismantled ...
Flow: 400 m³/h
Pressure: 48 bar
... Nova Rotors, is a range of progressing cavity pumps. This pump is completely reversible and has a wide pumps range. It features a one stage stator with long pitch geometry to improve the performance and ...
NOVA ROTORS s.r.l.
the best suppliers