Abrasion-resistant pumps

Flow: 1 l/min - 696 l/min
Pressure: 2 bar - 8.3 bar

... applications in explosion proof environments, such as ATEX – Group II 2GD X*. Furthermore, in most cases, ARO® EXP pumps with PVDF or conductive PVDF (CPVDF) wetted parts offer a better alternative ...

Flow: 1 l/min - 200 l/min
Pressure: 2 bar - 8.3 bar

... 1” non-metallic diaphragm pumps are a versatile solution for numerous applications. Our EXP 1” models achieve flow rates of up to 53 GPM (200.6 LPM) and offer a wide array of material and porting configurations. These ...

Flow: 0 l/min - 697 l/min
Pressure: 1 bar - 8 bar

2” non-metallic diaphragm pump The ARO nonmetallic 2” PD20P-XXS-XXX compact pump is a favorite of OEMs everywhere around the world. It is designed to be fully corrosion resistant. ...

Flow: 3,406 m³/h
Pressure: 130 psi
Head: 91 m

The HAZLETON VNCB, VNCT is used ideally for standard (VNCB) or harsh (VNCT) applications with either abrasive or corrosive slurries. It employs a cantilever shaft design, and its rotating assembly is very sturdy. It also has a replaceable ...

Flow: 0 l/min - 182 l/min
Pressure: 0 bar - 8.2 bar
Head: 5.2 m

Fields of application: drum and small tank transfer, pickling solutions, chemical feed, etc. Features: Absolutely lube-free and non stalling operation Can safely run dry Self-priming dry or wet Centre block made of corrosion-free ...

Flow: 0 l/min - 435 l/min
Pressure: 0 bar - 8.2 bar
Head: 6.7 m

DMP 1 1/2'' double diaphragm pump is an industrial solution for applications like filter press, tank cleaning, pigment and resin treatment. The system allows operation without requiring lubrication and stalling. It enables ...

Flow: 0 l/min - 719 l/min
Pressure: 0 bar - 8.2 bar
Head: 7.4 m

... block of the pump is constructed with the plastic with corrosion resistant features. It has limited, but easy to access construction parts. It features 681 I/min flow rate. It is an explosion free version ...

Flow: 3 l/h - 17,000 l/h
Pressure: 250 bar

EXTRU III pumps are of compact design and impress through their extraordinary compatibility. Their light construction and compact design allow simple installation, thus saving time and ...

Flow: 720 m³/h - 4,320 m³/h
Head: 12 m - 48 m
Power: 0 kW - 1,200 kW

ES Gravel Pump1. Broad path created by single casing and clamp bands connection; 2. Unique design to make maintenance and wet parts replacement convenient; 3. The wet parts are made of Ni-hard and high-chrome wear-resistant ...

Flow: 324 m³/h - 3,600 m³/h
Head: 26 m - 70 m
Power: 0 kW - 1,200 kW

ES Gravel Pump1. Broad path created by single casing and clamp bands connection; 2. Unique design to make maintenance and wet parts replacement convenient; 3. The wet parts are made of Ni-hard and high-chrome wear-resistant ...

Flow: 720 m³/h - 3,600 m³/h
Head: 18 m - 44 m
Power: 0 kW - 600 kW

ES Gravel Pump1. Broad path created by single casing and clamp bands connection; 2. Unique design to make maintenance and wet parts replacement convenient; 3. The wet parts are made of Ni-hard and high-chrome wear-resistant ...

Flow: 110 m³/h - 1,000 m³/h
Power: 18 kW - 156 kW

DRAGFLOW HEAVY DUTY HYDRAULIC PUMPS Dragflow Hydraulic Subersible Dredging Pumps. Characteristics: - Pump provided of agitator to stir things up - High abrasion resistance ...

Flow: 75 m³/h
Head: 47 m
Power: 24 kW

Hydraulic pumps for dredging Submersible hydraulic pumps with agitator. Variable speed. Particularly suitable for dredging heavy or abrasive mixtures. These are the main features of our dredging pumps: - ...

Flow: 30, 60 m³/h
Head: 12, 15, 18 m
Power: 3.7, 5.5, 7.5, 9, 11 kW

... submersible dredge pumps Characteristics: Pump provided of agitator to stir things up High abrasion resistance Low rotation speed Able to handle up to 70% per weight material density Electric ...

Flow: 0 m³/min - 0.45 m³/min
Head: 0 m - 18 m
Power: 0.48 kW - 1.5 kW

The single-phase portable LB-series is a submersible drainage pump that is a single phase one. Materials that are abrasion-resistant tend to be used to make its wear parts. The top discharge ...

Flow: 0 m³/min - 0.35 m³/min
Head: 0 m - 18 m
Power: 0.48 kW - 0.75 kW

... single-phase automatic portable drainage pump. An innovative electrode type relay unit attached to the pump automatically starts and stops the pump eliminating dry running the equipment. ...

Flow: 0 m³/min - 0.35 m³/min
Head: 0 m - 20 m
Power: 0.4 kW - 0.75 kW

... a submersible single-phase portable drainage pump. Though it is a single-phase unit, the pump has the durability equivalent to three-phase drainage pumps, since the wear parts are made ...

PIUSI Rotary Hand Pump is a stainless steel rotary hand pump with vanes for the transfer of AdBlue®, water and antifreeze. Entirely developed, manufactured and certified in Italy, this manual pump ...

... rotary pump is ideal for topping up and transferring diesel from drums. MADE IN PIUSI, MADE IN ITALY The Piusi Hand Pump manual diesel transfer pump is made of wear-resistant ...

Flow: 400 l/min
Head: 32 m
Power: 0.18 kW - 3 kW

The MPN Pump Series is particularly suitable for crystallizing media (no air can get inside), toxic or environmentally hazardous media. A small amount of gas in the liquid can also be transferred without ...

Flow: 140 l/min
Head: 14 m
Power: 0.55 kW

In the MDN Pump Series, the motor power is transmitted contact free and abrasion-free with a magnetic coupling through the closed housing wall (“Slot-pot”) to the pump impeller. An encapsulated ...

Flow: 0 l/h

The compact ViscoTec Dispenser 4RD6-EC ensures smooth and reliable product supplying of abrasive, high-filled or shear sensitive material - with a repeatability of +/- 1 %! Absolutely precise, consistent and reliable ...

ViscoTec hygienic dosing pump type VFL for food and cosmetics is a volumetric conveying pump based on the endless piston principle. Suitable for discontinuous or continuous pulsation-free metering of ...

Flow: 0.033 l/min - 66.4 l/min
Pressure: 1 bar - 20 bar

ViscoTec dosing and filling pump type RD-hygienic for food and cosmetics is a volumetric conveying pump based on the endless piston principle. Suitable for discontinuous or continuous pulsation-free metering ...

Flow: 200 m³/h
Pressure: 30 bar
Head: 140 m

Turo® Vortex Pumps with a completely open spherical channel. Only 15% of the pumped fluid comes into contact with the impeller. Around the world, thousands of pumps have proven themselves with decades ...

Flow: 1,500 l/s
Pressure: 30 bar
Head: 150 m

The high-performance pump for homogeneous liquids containing high concentrations of solids and high gas contents. Different impellers for large and small particle sizes. Applications Demanding fluids ...

Pressure: -0.4 bar - 150 bar

DuroTec® gear pumps for abrasive and poor lubricating fluids. The limit of applications of transfer gear pumps has been reached when the transfer medium does not have the required lubricity for a proper ...

... required, these self priming pumps can achieve suction lifts up to 8 meters on water. Description Our CB/SB, G, M and CP Range pumps provide an economic answer to many pumping duties. Simple design and ...

Flow: 19.44 m³/h - 1,267 m³/h
Head: 4 m - 33 m
Power: 15 kW - 200 kW

... also be operated normally for insufficient suction duties. Wet parts of type SP pumps are made of abrasion-resistant metal. All parts of type SP(R) pump immersed in ...

Flow: 19.44 m³/h - 43.2 m³/h
Head: 4.5 m - 28.5 m
Power: 15 kW

... also be operated normally for insufficient suction duties. Wet parts of type SP pumps are made of abrasion-resistant metal. All parts of type SP(R) pump immersed in ...

Flow: 23.4 m³/h - 111 m³/h
Head: 5 m - 29.5 m
Power: 30 kW

... also be operated normally for insufficient suction duties. Wet parts of type SP pumps are made of abrasion-resistant metal. All parts of type SP(R) pump immersed in ...

Flow: 1.6 l/min - 25 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 10 m

The gear pumps of the PM series have a wide range of models that allow the transfer of flow rates ranging from 25 l / min to 280 l / min. This type of pumps are suitable for use in the most diverse sectors ...

Flow: 0.2 l/min - 3 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 10 m

The gear pumps of the AM series have a wide range of models that allow the transfer of flow rates ranging from 3 l / min to 100 l / min. These pumps are suitable for working in a wide range of applications ...

Flow: 8 l/min - 88 l/min
Pressure: 40, 35, 30, 20 bar
Power: 6.2 kW

User-friendly injection systems: you can rely on the legendary MAI®400NT Cement grouting pumps are an integral part of major engineering and construction projects worldwide. The MAI®400NT is the global number one for ...

Flow: 7.5 l/min - 25 l/min
Pressure: 20, 25 bar
Power: 4 kW

... However, the performance of this grout pump is far from compromised. Purpose-optimised technology make this a trouble-free tool for a wide range of mortar-mixing and pressure grouting work. Highly wear-resistant ...

Flow: 8 l/min - 63 l/min
Pressure: 40, 20, 30, 35 bar
Power: 6.2, 6 kW

... you need a reliable, user-friendly grout pump for your construction or ground engineering project. The MAI®400HD grout pump is known for its robust design and user-friendly operation. Highly wear-resistant ...

Flow: 2,520 m³/h - 5,400 m³/h
Head: 13 m - 57 m
Power: 0 kW - 1,200 kW

... slurry pump is a type of centrifugal pump, designed for pumping liquid containing solid particles in mining, metallurgy,coal washing ,sewage water treatment,power plant,dredging.and chemical and petroleum industries ...

... pass. The sand and gravel pump is specially designed to handle high-abrasion applications that ordinary pumps can't even attempt. ◆ One-piece case and wear-resistant ...

Flow: 3,000 m³/h
Pressure: 4 bar
Head: 40 m

SG(H) dredge and gravel pump is designed for pumping extremely aggressive slurry, contain large particle, and is capable to handle big solid at consistently high efficiency results in low cost of ownership. The large ...

Flow: max 850.0 us gal/min
Pressure: max 25.0 bar

... function as a process and/or CIP pump, which helps in reducing maintenance time and costs, with the advantage that it is suitable for abrasive products like toothpaste. It can handle air up to 60%, which prevents pump ...

Flow: 1.3, 3.1, 7 m³/h
Pressure: 7 bar

Almatec C-Series The Cost-Effective Plastic AODD Pumps The Almatec® C-Series Air-Operated Double-Diaphragm (AODD) Pump is a cost-effective, reliable and superior-built alternative and features a solid ...

Flow: max 100.0 m³/h
Pressure: max 4.0 bar
Power: max 11.0 kW

... with skins, seed and small solids PERFECT OPERATION Perfect operation thanks to their synchronism, delicate treatment of the product at low speeds, compact size, ease of maintenance, reversibleflow, ...

Flow: 90 m³/h - 8,000 m³/h
Head: 10 m - 50 m
Power: 2.5 ch - 13 ch

... building material and other industries. They can be used as Circulating Pump of FGD Absorbing Tower, Limestone Slurry Pump, Gypsum Slurry Pump, Waste Water Pump and Leakaged ...

Flow: 5.3 m³/h - 2,900 m³/h
Head: 7.5 m - 105 m

TZJ Slurry pumps, a new generation of “high efficiency, wear and corrosion resistance, no leakage” products especially for mineral processing application, are developed by the joint cooperation from Tsinghua University, ...

Flow: 112 m³/h - 10,800 m³/h
Head: 8.5 m - 140 m

... are applied for shaft seals, and there is no leak inside the pump. Applying solid-liquid two-phase theory to the pump impellers to get the better efficiency. By using the liquid inside the pump ...

Flow: 0 m³/h - 900 m³/h
Pressure: 0 bar - 8 bar
Head: 0 m - 80 m

Submersible pumps made of vinyl ester thermosetting resins, Saturnsub have a high mechanical strength, dimensional stability and an excellent chemical resistance. The electric motor is completely made of stainless steel ...

Flow: 0 m³/h - 900 m³/h
Pressure: 0 Pa - 800,000 Pa
Head: 0 µm - 80,000,000 µm

Highly resistant to chemicals and corrosive agents, this special pump was designed to run into waste and contaminated water treatments as well as into the heaviest applications. The entire construction ...

Flow: 0 l/min - 1,200 l/min
Head: 0 m - 45 m
Power: 4 kW - 21.3 kW

Cutter Pumps The cutter pumps of the series SFC are capable of cutting aluminium chips and similar materials and pumping of these materials along with the coolant fluid. An agitator located at the pump ...

Flow: 0 l/min - 1,000 l/min
Head: 0 m - 20 m
Power: 8.6, 7.5 kW

... suction mouth of the pump. The chips are being picked up by the agitator then broken up, if necessary, and then cut and delivered by the pump. The SXC pumps are equipped with the user-friendly ...

Flow: 0 l/min - 800 l/min
Head: 0 m - 18 m
Power: 3.3, 3.8 kW

Cutter Pumps The cutter pumps of the series SPC are desinged to handle and reliably cut long, stringy plastic chips. Because of the higher number of cutting blades which results in an increased cutting ...

... SELF-PRIMING SWIMMING POOL PUMP DESCRIPTION For the private and small hotel pool market the self-priming WATERblue-Bηeo with integrated hair and fibre filter is of utmost importance due to its maximum ...

Flow: 0 l/s - 10 l/s
Head: 0 m - 20 m
Power: 0.97, 1.4, 1.5 kW

... conditions. The hydraulic design on the Flygt 2600 series pumps makes them several times more wear resistant in comparison with traditional dewatering pumps. Our great expertise in hydraulics ...