Pressure: 10, 30 bar
... ViscoTec dispenser 3VMP18, as a volumetric dispensing pump for larger volumes, ensures smooth and reliable product supplying of abrasive, high-filled or shear sensitive material - with a repeatability of +/- 1 %! Absolutely precise, ...
Flow: 0.033 l/min - 66.4 l/min
Pressure: 1 bar - 20 bar
... ViscoTec dosing and filling pump type RD-hygienic for food and cosmetics is a volumetric conveying pump based on the endless piston principle. Suitable for discontinuous or continuous pulsation-free metering of viscous, ...
Flow: 0 m³/h - 13.2 m³/h
Pressure: 0 bar - 8 bar
Head: 2 m - 8 m
... operated diaphragm pump is an environmentally friendly alternative to the traditional air-operated diaphragm pump. It is designed for gentle pumping of the most aggressive media, including those containing abrasive particles. This ...
Flow: 5.3 m³/h - 2,900 m³/h
Head: 7.5 m - 105 m
... TZJ Slurry pumps, a new generation of “high efficiency, wear and corrosion resistance, no leakage” products especially for mineral processing application, are developed by the joint cooperation from Tsinghua University, China University ...
Shandong Zhangqiu Blower Co.,Ltd
Flow: 5.3 m³/h - 2,900 m³/h
Head: 7.5 m - 105 m
... and corrosion conditions. Different product structures with horizontal double-casing pump, horizontal single-casing pump, and vertical single-casing pumps are available. There are also various impeller ...
Shandong Zhangqiu Blower Co.,Ltd
Flow: 11 m³/h - 400 m³/h
Head: 7.6 m - 50 m
... TZJL pumps are vertical type, the product is fixed above the slurry pool by the mounting plate, only the pump head is dipped in the slurry liquid, bearing and supporting parts are all above the pool, and the shaft seal ...
Shandong Zhangqiu Blower Co.,Ltd
Flow: 26.5 l/min - 1,000 l/min
Pressure: 1.5 bar - 8 bar
Head: 8 m
... advantages of our PIVOT Series AODD pumps are: • Air motor with exclusive frictionless pivot-shaft air valve resulting in: o Larger flow delivery o Smooth pump operation o Reduced flow pulsation o No pump ...
SAMOA Industrial, S.A.
Flow: 31 l/min
Pressure: 1.5 bar - 7 bar
Head: 3 m - 7 m
... swapping and upgrading of your old pumps. • Optimized design for maximum performance. • Premium materials for a long and reliable life ATEX certified versions available Can be configured to connect a Smart Pump-Controller ...
SAMOA Industrial, S.A.
Flow: 210 l/min
Pressure: 1.5 bar - 8 bar
Head: 5 m - 8 m
... clamped pumps. • Optimized design for maximum performance. • Premium materials for a long and reliable service life. ATEX certified Can be configured to connect a Smart Pump-Controller System ...
SAMOA Industrial, S.A.
Flow: 0 m³/min - 0.35 m³/min
Head: 0 m - 18 m
Power: 0.48, 0.75 kW
... portable drainage pump. An innovative electrode type relay unit attached to the pump automatically starts and stops the pump to eliminate dry-running. This mechanism greatly reduces power consumption ...
TSURUMI MANUFACTURING CO., LTD.
Flow: 0 m³/min - 0.24 m³/min
Head: 0 m - 14 m
Power: 0.55 kW
... The HSD pump is a submersible single-phase portable slurry pump. It is equipped with a high-chromium cast iron agitator that assists smooth suction of the settled matters. Though the pump is a single-phase ...
TSURUMI MANUFACTURING CO., LTD.
Flow: 0 m³/min - 0.24 m³/min
Head: 0 m - 18 m
Power: 0.48, 0.75 kW
... pump is a submersible single-phase portable residue drainage pump. The specially designed bottom plate enables the pump to drain down to 1mm water level. It has a swing check valve that prevents reverse-flow ...
TSURUMI MANUFACTURING CO., LTD.
Flow: 0 l/s - 200 l/s
Pressure: 0 bar - 30 bar
Head: 140 m
... Turo® Vortex Pumps with a completely open spherical channel. Only 15% of the pumped fluid comes into contact with the impeller. Around the world, thousands of pumps have proven themselves with decades of excellent service. Applications - ...
Flow: 1,500 l/s
Pressure: 30 bar
Head: 150 m
... The high-performance pump for homogeneous liquids containing high concentrations of solids and high gas contents. Different impellers for large and small particle sizes. Applications - Demanding fluids in the chemical ...
Flow: 0.5 m³/h - 8 m³/h
Pressure: 0 bar - 100 bar
Head: 0 m - 45 m
... ranging between 0.5 to 8 m³/h, and cannot be realised with a reactor pump. For this reason, Egger has developed a pilot pump S that meets all requirements for commercial process pumps. This series has ...
Pressure: -0.4 bar - 150 bar
Fluid temperature: -20 °C - 150 °C
... DuroTec® gear pumps KP 1 for abrasive and poor lubricating fluids. The limit of applications of transfer gear pumps has been reached when the transfer medium does not have the required lubricity for a proper function ...
Flow: 91 l/min - 240 l/min
Pressure: 1,450 bar - 2,800 bar
Length: 187 cm
... -pressure pump should be repaired every six months to prevent working with illness. During the non-use period, the high-pressure pump should be lifted away from the water source in time, and the water accumulated in ...
Tinajin Harvest
Flow: 246 l/min - 510 l/min
Pressure: 40 bar - 240 bar
Power: 30 kW - 110 kW
... large high-pressure pump is equivalent to two small high-pressure pumps working in parallel (referring to the same lift and flow rate), and the efficiency of the large high-pressure pump ...
Tinajin Harvest
Flow: 2.1 m³/h - 10.5 m³/h
Pressure: 400 bar - 1,850 bar
Power: 132 kW - 250 kW
... surface cleaning, coal mine, etc. The Electric High Pressure Plunger Pump is a cutting-edge device designed to meet the demanding requirements of various industries. This pump combines advanced technology with high-performance ...
Tinajin Harvest
Flow: 300 l/h - 86,400 l/h
Power: 0.55 kW - 37 kW
Input diameter: 25 mm - 150 mm
... VISCOSITY MATERIAL FEEDING
PUMP
The medium viscosity can reach 1,000,000CP fed by this
pump
2.THIN MEDIUM FEEDING
PUMP
If the viscosity of the fed medium descends and leakage increases, driving ...
... of a centrifugal pump is that the impeller, driven by an electric motor, rotates at high speed. Centrifugal force propels the liquid in the impellers flow path from the center to the outer edge, where it flows into the volute-shaped pump ...
Flow: 5 m³/h - 30 m³/h
Head: 10, 15, 18, 20 m
Power: 1.5, 4, 5.5, 7.5 kW
... CIP self-priming
pump adopts acid-resisting stainless steel (AISI 316) in valve body,
which has unique acid and alkali resistance, and comply with sanitary requirements for foods.
As a positive displacement
pump, ...
Flow: 0 l/h - 2,700 l/h
Pressure: 0.3 MPa - 1.5 MPa
Power: 0.25 kW - 1.5 kW
... The result is the employed compact and rigid mechanism. An outdoor installation is due to the fully enclosed oil bath lubrication possible. Various Typs and material Fitting for nearly any application a various number of pump ...
Flow: 7 l/min - 564 l/min
Pressure: 1 bar - 40 bar
Weight: 22 kg
... powerful - this is our new screw pump innovation FLEXCORE. Not only can it be installed in various existing piping system, it also impresses with a broad application range. For the start of the new pump ...
Leistritz Pumpen GmbH
Flow: 65 m³/h
Head: 10.9 m
... Transformer Oil Pump Product Overview The shell of hydraulic suspension pump is composed of motor shell, pump body, components of junction box and sealing ring.The protection class of the whole pump ...
Flow: 2 m³/h - 31 m³/h
Head: 1 m - 13 m
Power: 0.5 kW - 1.7 kW
... centrifugal submersible drainage pumps US 75-155 are suitable for dealing with notably contaminated water and capable of handling solids up to 50 mm particle size. With their free passage of 50 mm, these pumps are able ...
JUNG PUMPEN
Flow: 8 l/min - 88 l/min
Pressure: 20, 40, 30, 35 bar
Power: 6.2 kW
... User-friendly injection systems: you can rely on the legendary MAI®400NT Cement grouting pumps are an integral part of major engineering and construction projects worldwide. The MAI®400NT is the global number one for grouting and injection ...
Mai International
Flow: 1.3, 3.1, 7 m³/h
Pressure: 7 bar
... Almatec C-Series The Cost-Effective Plastic AODD Pumps The Almatec® C-Series Air-Operated Double-Diaphragm (AODD) Pump is a cost-effective, reliable and superior-built alternative and features a solid design suitable ...
Flow: 1 m³/h - 21 m³/h
Head: 340 m
Power: 0.25 kW - 7.5 kW
... submersible pumps
- Upper and lower bases made of precision-cast stainless steel for corrosion resistance and rigid motor attachment
- Abrasion-resistant construction suitable for sandy
Flow: 30, 40 l/min
Pressure: 10 bar - 70 bar
Length: 162 mm
... Variable Displacement Vane Pump, Variable Volume Vane Pump Variable Displacement Vane Pump with Built-in Check Valve is easy to be equipped with manifold block. The manifold block can be directly installed ...
Flow: 25 m³/h - 100 m³/h
Head: 9 m - 30 m
Power: 1.1 kW - 4.5 kW
... Submersible Sand Pump are mainly composed of three parts: pump head, motor, and combined seal. The flow-through parts of the sand pump (including pump body, pump cover ...
Flow: 400 l/min
Head: 32 m
Power: 0.18 kW - 3 kW
... The MPN Pump Series is particularly suitable for crystallizing media (no air can get inside), toxic or environmentally hazardous media. A small amount of gas in the liquid can also be transferred without disrupting ...
SCHMITT - Kreiselpumpen GmbH & Co. KG
Flow: 38, 34, 31 l/min
Weight: 3.6, 3.2 kg
... , etc.; the pumps are not suitable for other media and therefore not for oils, gasoline or water. Protank 25, non-self-priming pumps for diesel and heating oil of hazardous class A III in 230 V, 12 V or 24 V Features • ...
Flow: 4 l/min
Pressure: 5 bar
... lifespan. Low noise, corrosion resistant, wear- resistant, sanitary. Big contact can pass through big current, perfect conductivity. Adopt quick connect terminal to plug, reliable performance, not easy to break. Sprayer ...
Flow: 3.8 l/min
Pressure: 320 MPa - 380 MPa
Power: 50 ch
... Adopt servo motor Save on costs 30% Dual intensifier, continuous operation for 24 hours Motor Rating：37kW/50HP Pressure Range (Deadhead) ：60,000psi Max. Flow Rate at Max. Pressure (60 Hz)：1.00gal/min Attenuator Volume：2L Length：67.7in Width：45.6in Height：59.3in ...
Flow: 23.33 l/min - 3,240 l/min
Pressure: 2.5 MPa
Head: 20 m - 230 m
... GDL Vertical Multistage Pipeline Pump is the latest model with the features of energy-saving and less space demand，easy to install and has stable performances. (1)With its 304 stainless steel shell and wear- resistant ...
Flow: 0 m³/h - 20 m³/h
Head: max 15.0 m
Input diameter: max 80.0 mm
... Dry-running capability. Rapid dry self-priming up to a depth of 7 meters in a matter of seconds. No seal or rotating part in contact with the pumped liquid. Can be used where there are abrasive or acid fluids. Wide passage for solid bodies (50 ...
Caffini Cipriano s.r.l.
Flow: 4.9 m³/h - 235.7 m³/h
Pressure: 4 bar - 24 bar
Power: 2.2 kW - 45 kW
... carried out on-site without the need to remove the pump from its installation. This significantly reduces downtime and optimizes the productivity of industrial operations. The PCM EcoMoineau™ MX pump is the ideal choice ...
PCM
the best suppliers