- Hydraulics - Pneumatics >
- Valve >
- Ball valve >
- Richter
Richter ball valves
DN: 0.25 mm
Pressure: 10 bar
Temperature: -20 °C - 80 °C
... 2-way ball valve - Ball bore: borehole through the middle, DN 4 mm wide - Connections: 2 x G 1/4" i - Front-panel mounting - Corrosion-resistant - High level of gas tightness - Material ...
DN: 2, 3, 4 in
Flow rate: 5 m³/h - 150 m³/h
Hydraulic control valve used to control water level in tanks and reservoirs by means of 2 way modulating float valve. When the water reaches the upper level the valve closes completely. Applications This ...
A.G.P. VALVULAS 10 SL
DN: 80 mm - 300 mm
Flow rate: 20 m³/h - 1,200 m³/h
Hydraulic control valve used to control water level in tanks and reservoirs by means of a differential float valve. When the water reaches the upper preset level the valve closes completely ...
A.G.P. VALVULAS 10 SL
DN: 2, 3, 4 in
Flow rate: 5 m³/h - 150 m³/h
Hydraulic control valve used to control water level in tanks and reservoirs by means of a differential float valve. When the water reaches the upper preset level the valve closes completely ...
A.G.P. VALVULAS 10 SL
DN: 10 mm - 50 mm
Pressure: 10, 16 bar
... • Box with limit switches position indication (electromechanical and / or inductive) Advantage • High quality industrial valves • Flexible modular system with a wide range of variants • Reliable material combinations ...
DIVATEC,SL
DN: 15 mm - 100 mm
Pressure: 10, 16 bar
Temperature: -20 °C - 100 °C
• BV ball valves for chemical fluids • PVC-U, PVC-C (HT), PP or PVDF thermoplastic materials • EPDM, FKM gaskets, on request we have a FKM FB with glass fiber loading for very corrosive fluid applications • ...
DIVATEC,SL
DN: 15 mm - 50 mm
... spaces in the ball • PVC-U, PP-GF • Possibility of pneumatic actuator DA, NC or electric motor 230V / 24V Ball valve completely injected in one piece, very small dead space, high value ...
DIVATEC,SL
DN: 20 mm - 32 mm
Pressure: 63 psi
Temperature: -328 °F - 248 °F
CO2 for food / industrialapplications LAr for welding Cooling plants
Goetze KG Armaturen
DN: 6.35 mm
Pressure: 250, 160 psi
Temperature: -29 °C - 66 °C
... Pressure Control Valve provides regulated pressure to operate a variety of Williams pneumatic metering pumps. It features an economical pressure regulator capable of output pressures of 0-125 psi (0-862 Kpa). The Pressure ...
DN: 6 in - 8 in
Pressure: 300, 750 psi
Temperature: -46 °C - 240 °C
Trunnion ball | Soft seated | Full bore | Bidirectional Fire safe design | Antistatic design Live loaded stem packing Double encapsulated body sealing ISO 5211 top works for automation Anti blowout stem Self relieving ...
DN: 15 mm - 300 mm
Pressure: 16, 25, 40 bar
Temperature: -20 °C - 180 °C
V212 series ball valves consist of 3-piece body design according to DIN3202-F1 standard. The three piece body design of V212 Series offers many advantages, including installation flexibility, elimination ...
Doruk Endustri Ltd.
THROTTLE VALVE WITH FREE FLOW IN ONE DIRECTION DESCRIPTION The QTM7 valve is a one-way flow control valve with built-in non-return valve for reverse free flow, in ...
Pressure: 6,000 psi
... 'PSB' rated upto 6,000psi (414bar) The 3-way L-Port diverter valves are an economical and safe method of diverting high pressure lines, saving the use of several high pressure 2-way valves. Ensuring ...
Alco
... PN16 flanges. Face to face according to EN 558 Series 14. SFF ball valves are not suitable for choking: open or closed position is possible only. Special execution [Series 02.111] with ball ...
DN: 15 mm - 100 mm
Pressure: 40, 16 bar
Temperature: -29 °C - 225 °C
... Multiple way ball valve, trunnion mounted ball, both sides spring loaded seat rings, soft seated. Features nominal sizes DN 15 - DN 100 nominal sizes NPS 1/2" - NPS 4" ...
KLINGER-SCHÖNEBERG GmbH
DN: 15 mm - 100 mm
Pressure: 40, 16 bar
Temperature: -29 °C - 225 °C
... Multiple way ball valve, trunnion mounted ball, both sides spring loaded seat rings, metal seated. Features nominal sizes DN 15 - DN 100 nominal sizes NPS 1/2" - NPS 4" ...
KLINGER-SCHÖNEBERG GmbH
DN: 50 mm - 200 mm
Pressure: 16, 10 bar
Temperature: -10 °C - 225 °C
INTEC K500 Tank bottom ball valve, floating ball, single side spring loaded seat ring, soft seated. Features DN 80/50 - DN 200/150 two-piece split body soft seated ...
KLINGER-SCHÖNEBERG GmbH
DN: 15, 8, 10 mm
Pressure: 8, 10, 6 bar
Temperature: -20 °C - 140 °C
The ball and shut-off valves are available in 2-way and 3-way configurations and in a wide variety of threaded connections – including push-in. The different flow capacities ensure a reliable solution ...
DN: 10 mm - 100 mm
Pressure: 16 bar - 64 bar
... restrictions guaranteed High-precision Maximum versatility The VVS is a manual sanitary ball valve made by positioning a precision ball with hole inside the valve ...
BARDIANI VALVOLE S.p.a.
The PA intermittent blowdown valve is set to the open position using a lever. Here, the pressure pin forces the spring-loaded valve plug out of the valve seat, opening up a large cross ...
DN: 0.25, 0.125 in
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C
The SLT circuit switch allows to convey two pneumatic signals into one way, keeping the two pneumatic sources separated. They have aluminium body, NBR seals and brass components and are available with 1/8” and 1/4" ports. CONSTRUCTIVE ...
DN: 0.5, 0.25, 0.125 in
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C
UM series one way valves are used when there is the need to keep under pressure one tube, allowing, at the same time, the flow if air to one way.
DN: 0.5, 1, 0.125, 0.25 in
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C
Quick exhaust valves SR are used to exhaust the pressure of the chambers of a pneumatic cylinder directly into the atmosphere, growing the speed of the cylinder to the maximum. They have the body and the components ...
Pressure: 0 psi - 5,500 psi
The Series MV High Pressure Gas Control Valve is optimized for the demanding requirements of Gas Cylinder Fill Plants, Manifold, and Piping System applications. The High Pressure Oxygen Service Valve ...
Generant
DN: 500 mm - 2,200 mm
Pressure: 10 bar - 100 bar
Ball and Spherical Valves Mainly used in hydroelectric power plants when high values of flow rate speed and/or pressure rating are required. Functions ■ maintenance operation ■ emergency / safety ...
DN: 0.5, 0.75, 1 in
Pressure: 250 psi
Temperature: 400 °F
The Motorized Ball Valve delivers a torque of 150 in-lbs using a non-reversing motor, opening the valve in 5 seconds and minimizing pressure hammer. The motor is protected in a NEMA 4X ...
DN: 2 mm - 30 mm
This bi-directional valve is ideal for controlling varying flow rates of gas, liquid and slurries. Rangeability in excess of 350 to 1 Cavitation and noise reduction trim available Bi-directional ...
Temperature: 454, 565 °C
The DSCV-SA is generally used for Turbine Bypass applications where the valves typically remain closed for long periods of time to isolate steam flow.: Cast & fabricated design. Wide size configuration Extremely ...
DN: 2 in - 30 in
This valve offers the highest Cvs of any competitive valve in the wide open position, yet gives modulating control over the full range of travel. Features This bi-directional valve ...
DN: 0.15 in - 1 in
Pressure: 10 bar
Temperature: 93 °C
Combines three valves in one: Isolation Valve, Check Valve and Companion Flange Free floating flange allows easy alignment and installation of pumps Prevents gravity circulation Isolates ...
DN: 0.75 in
Flow rate: 9 us gal/min
... hydronic systems utilizing zone valves Controls excess flow in the system when there is reduction in demand Available in ¾” connection All brass body with non-ferrous internals The differential bypass ...
DN: 2 in - 12 in
... direct mounting pad to ISO 5211 • 6” and larger valves are equipped with lifting lugs • 8” and larger valves can be equipped with vent and drain valves (Optional) • Antistatic grounding ...
HABONIM
DN: 2 in - 12 in
Pressure: 420 bar
Special mechanical design and construction Solid one-piece high torque durable stem. Tight stem-to-ball directional engagement, ensures relief hole alignment. Strict materials and manufacturing tolerances control. Efficient ...
HABONIM
DN: 0.25 in - 8 in
Pressure: 1,494 psi
... lower operating torque. Special mechanical design and construction Solid one-piece high torque durable stem. Tight stem-to-ball directional engagement, ensures relief hole alignment. Strict materials and manufacturing ...
HABONIM
DN: 8 mm - 50 mm
Pressure: 63 bar
Temperature: -25 °C - 180 °C
industry, high temperature, high pressure PRESSURE PFA/PS in bar BODY : CF8M BALL : Stainless steel 316
SOCLA
DN: 8 mm - 80 mm
Pressure: 63 bar
Temperature: -25 °C - 180 °C
industry, high temperature, high pressure PRESSURE PFA/PS in bar BODY : CF8M
SOCLA
DN: 15 mm - 50 mm
Pressure: 100 bar
Temperature: -20 °C - 100 °C
industry, high temperature, high pressure PRESSURE PFA/PS in bar BALL : stainless steel 316 - SEALS : PTFE SPECIAL : ISO EN 5211 top connection, actuation possible
SOCLA
DN: 3, 5.5 mm
Pressure: 20 bar
Temperature: -20 °C - 80 °C
2/2-way socket ball valve Micro brass design chromed with connection connector and male R-thread Producer Material of casing: Brass chromed Material of ball: Brass hard-chromium ...
Mader
DN: 15 mm - 76 mm
Temperature: -10 °C - 170 °C
2/2-way ball valve brass design nickel-plated in medium heavy design with female G-/R-thread Producer Material of casing: Brass nickel-plated Material of ball: Brass hard-chromium ...
Mader
DN: 10, 15, 20, 25 mm
Temperature: -20 °C - 150 °C
2/2-way ball valve brass design nickel-plated with butterfly handle with male thread Producer Function principle: 2/2-ways Actuation type: manually Material of casing: Brass nickel-plated Material ...
Mader
DN: 4 mm - 38 mm
Pressure: 350, 400, 500 bar
Temperature: -20 °C - 80 °C
... Anfrage Contact travel 0°; 90° Surface burnished Material Steel housing, ball and operating shaft POM ball seal NBR O-ring
DN: 6 mm - 38 mm
Pressure: 400 bar
Temperature: -20 °C - 60 °C
... Temperaturmöglichkeiten auf Anfrage Contact travel 0°; 90° Material Stainless steel housing, ball and operating shaft POM ball seal NBR O-ring
DN: 6 mm - 50 mm
Pressure: 25 bar
Temperature: -20 °C - 150 °C
... 0°; 90° Surface nickel plated Material Brass housing Aluminium handle Brass ball, hard chrome-plated PTFE ball seal
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining