Richter ISO valves

DN: 80 mm - 300 mm
Pressure: 63, 100, 160 bar
Temperature: -10 °C - 550 °C

Gate valve to DIN/EN with flanged ends (AKG-A) or butt weld ends (AKGS-A), pressure seal design, body of forged or welded construction, non-rotating stem, split wedge with flexibly mounted discs for precise alignment ...

DN: 0.125 in - 0.75 in
Pressure: 414, 1,035, 690 bar
Temperature: -40 °C - 121 °C

... ®, CTFE Valve Stem 17-4 Stainless Steel Remaining Parts -316 Stainless Steel, Brass Flow CapacityVA Series -Valve: Cv = 0.75 -VG Series Valve: CV = 2.0 Weight (approximate) -VA ...

DN: 1 in - 10 in

... MR0175-2002, MR0175-2003, MR0103, and MR0175/ISO 15156. -Ball seal inspection and replacement is done at the valve body inlet, without removing the actuator or disassembling the valve. -The ...

DN: 0 mm - 1,200 mm
Pressure: 0 bar - 830 bar
Temperature: -196 °C - 570 °C

... Nuovo Pignone Antisurge valve center of excellence is located in Bari (Italy), with capacity and aerodynamic noise testing facilities. The design and production are certified ISO9001 and ISO/TS29001. Nuovo ...

DN: 15 mm - 200 mm
Pressure: 16 bar
Temperature: -60 °C - 200 °C

... adjustable stem sealing Specifications •Design - ISO/DIN •Nominal Pressure - 16 bar •Lining - PFA •Housing Material - EN-JS 1049 •Face-to-Face - DIN EN 558-1 and ISO 5752 series 1 •Flanges ...

DN: 40 mm - 400 mm
Pressure: 25 bar

... Continental has a full range of stack valves including check, flow control, relief, reducing, sequencing, shuttle valves and counterbalance valves – all manufactured to NFPA and ANSI/ISO ...

DN: 0.5 in - 2 in
Pressure: 138 bar
Temperature: 0 °F - 400 °F

The NIBCO® carbon steel ball valve provides bubble-tight shutoff at 2000 PSI. This valve is available with socket weld pipe connections and cast ISO mounting pad for actuation purposes. ...

DN: 50 mm - 400 mm
Pressure: 16 bar
Temperature: 50 °C

Resilient-seated gate valve with bolted cover connection and flanges according to the ANSI/AWWA standard. Proven design with innovative improvements, such as plastic sliding caps on the wedge, guarantee low operating ...

DN: 0.25 in - 2 in
Pressure: 6,000 psi

... ASTM-A351-CF8/ EN10213 1.4308), S-20C (ASTM-A216-WCB, EN10213 1.0619) Full port, Threaded end, Blow-out proof stem Mounting pad ISO 5211, Locking device, Casting handle

DN: 50, 15, 40, 25 mm
Pressure: 16 bar
Temperature: -15 °C - 130 °C

... and reliable control Features Regulating valve free of silicone grease with female thread DIN EN ISO 228-1 G for the control of cold/hot water in closed circuits In combination with AVP 142 and AV ...

DN: 100 mm
Pressure: 250 bar

... round body ball valves designed for use as on/off devices for hydraulic applications. For direct ISO flange connection according to ISO 6164. Pressure range: up to 400 bar / 5800 PSI ...

DN: 63 mm - 320 mm
Pressure: 4 bar - 7 bar
Temperature: 80, 50, 120 °C

Well suited as shut-off device for pumps. Key features are easy and fast maintenance and virtually shock-free locking.

DN: 101.6 mm
Pressure: 207 bar
Temperature: -54 °C - 204 °C

... line exceeds preset value, the valve relieves pressure to port 4. Features Two valve functions in one, industry-common cavity. Adjustments cannot be backed out of the valve. Relief ...

DN: 25 mm - 500 mm
Pressure: 10 bar - 50 bar

... actuated on/off valves. The ball valve meets ISO standards. The valve is available with threaded ends, welding ends or flanges. It is also possible to combine different ...

DN: 28 in - 40 in
Pressure: 110 psi
Temperature: 175 °F

... each side of the valve for lower bolt tightening torque. Stem shall be of 304 stainless steel non wetted, 2-piece design fully engaging with the disc. Valves shall have a molded ISO ...

DN: 8 mm - 50 mm
Pressure: 138 bar
Temperature: -20 °C - 160 °C

Barstock ball valve monobloc type class 800 in stainless steel A479 316/316L, full bore, F/F ISO 7/1 threading or F/F NPT, Fire safe, Antistatic device.

DN: 0.5 in - 12 in
Pressure: 100 psi - 290 psi
Temperature: -29 °C - 316 °C

... Design and Testing Standards​ API 598 Valve Inspection and Testing PED Design and fabrication of pressure equipment API 599 Metal Plug Valves-Flanged, Threaded and Welding Ends ISO ...

DN: 0.5 in - 8 in

... Quality Standard MSS SP 55 All wetted component materials meet NACE MR0175 / ISO15156 & NACE MR0103 / ISO17945 Fire-Safe API 607, ISO 10497, API 6FA Fugitive Emissions : ISO ...

DN: 0.5 in - 4 in
Pressure: 0 psi - 250 psi
Temperature: -29 °C - 160 °C

... stainless body throudh dovetail design Double sealing valve body design Easy automation with ISO 5211 acuator mounting pad ►Application for PFA Lined Stainless Steel Ball Valves ...

DN: 25 mm - 150 mm
Pressure: max 22.7 bar

Reliable flow direction control in a hygienic production process  - Two-part valve disc, screwed, with a defined space for the sealing ring for easy installation - Seal resistant to seepage and ripout  - Shaft ...

DN: 8 mm
Pressure: 25 bar
Temperature: -10 °C - 100 °C

... Brass Typology - Dynamic balancing, Static balancing Connection - ISO 228/1, ISO 7/1 Test point with drain Threaded M (¼” ISO 7/1R) on valve side Threaded ...

DN: 15 mm - 125 mm

... equipment with handlever, manual gear, pneumatic or electric actuator (on request) Control equipment connection according to ISO 5211 On request, possibility of special executions with the employment of different materials Antistatic ...

DN: 0.25 in - 0.5 in
Pressure: 0 bar - 440 bar
Temperature: -29 °C - 38 °C

... of GAUGES VALVES: Option with purge Option with check flange with sealing plug to fit a standard pressure gauge. Option with M20x150 test bore Pneumatic piston valve. Benefits Pressure ...

DN: 4 mm - 32 mm
Temperature: -50 °C - 200 °C

Pneumatic control valve VALVE STYLE Butterfly valve USAGE Throttling service Low-pressure service On/off service Hygienic service VERSION ANSI SUPPLY Pneumatic VALVE ...