- Hydraulics - Pneumatics >
- Valve >
- Regulating valve >
- Richter
Richter regulating valves
DN: 15 mm - 100 mm
Pressure: 160 bar
Nominal diameter DN 15...100. Nominal pressure PN 16...160. Two-way and three-way design Valve body materials GJL250 GJS400-18-LT GP240GH GX5CrNiMo19-11-2 G17CrMo5-5 On-off cone, parabolic cone, perforated cone, V-port ...
RTK Regeltechnik Kornwestheim
DN: 5 mm - 22 mm
Pressure: 200 bar - 400 bar
Temperature: -60 °C - 200 °C
Forged. Housing Material: 1.4571, Spindle Material: 1.4571, Spindle Seal: PTFE, Hand wheel: pressed. Also available with NPT thread - on request. Temperature range: -60 ° C to 200 ° C. At elevated temperatures, please consult the pressure ...
A Pilot operated 3, 5-port valve with built-in pressure sensor has been added to the 4GB*R Series.The pressure sensor has been integrated with the valve for preventative maintenance. It can be used for ...
CKD
Pressure: 17.2 bar
... can independently activate an actuator to open the deluge valve: a pneumatic Dry Pilot detection Line and/or an electric solenoid, connected to sensorst hrough a control panel. Once open, the valve reduces ...
Raphael Valves Industries (1975) Ltd
DN: 40 mm - 300 mm
Pressure: 25, 10, 16 bar
Temperature: -29 °C - 80 °C
... low flow The hydraulic control valve is the most effective device for automating industrial and municipal water supply sytems or any other system that requires control of changing operating conditions. The hydraulic ...
Raphael Valves Industries (1975) Ltd
DN: 50 mm - 900 mm
Pressure: 16 bar - 64 bar
Temperature: -29 °C - 90 °C
... Actuated Hydraulic Control Valve for use in waterworks for pressure reducing, pressure sustaining, pressure relief, flow control, surge anticipation, level control and other control applications. The hydraulic control ...
Raphael Valves Industries (1975) Ltd
DN: 40 mm - 1,600 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C
... the request of customers . The gate valve body is made of cast steel and it is suitably dimensioned to assure a high safety factor. The thicknesses are always higher than the mini-mum ones established for GATE VALVE ...
Di Nicola Infinam Srl
DN: 100 mm - 1,400 mm
Pressure: 2.5 bar - 64 bar
... to utilize devices able to control the distribution of the water without wasting it. Needle valve is especially designed to realize the function of regulating the water flow, maintaining an easy handling ...
Di Nicola Infinam Srl
DN: 100 mm - 3,000 mm
Pressure: 16, 10, 25 bar
Temperature: -40 °C - 200 °C
... be used as a safety valve (positive safety valve able to close even in case of tampering) In addition to the above mentioned technical advantages there is a remarkable economical benefit as this valve ...
Di Nicola Infinam Srl
DN: 50 mm - 600 mm
Pressure: 25 bar
Flow rate: 16 m³/h - 5,400 m³/h
EXCESSIVE FLOW VALVE The valve avoids reservoir emptying and flooding dues to casual pipeline failure. The valve is controlled by a differential hydraulic pilot that senses flow speed ...
Tecnidro
DN: 50 mm - 600 mm
Pressure: 40 bar
Flow rate: 16 m³/h - 5,400 m³/h
PROPORTIONAL PISTON ACTUATED VALVE DESIGNED FOR HIGH DIFFERENTIAL PRESSURES The valve maintains downstream pressure to a constant and pre-set rate of upstream value. No pilots needed. The valve ...
Tecnidro
DN: 80 mm - 300 mm
Pressure: 1 bar - 16 bar
Flow rate: 10 m³/h - 1,600 m³/h
PRESSURE REDUCING VALVE The valve reduces high upstream pressure to a pre-set lower and constant downstream pressure level, regardless of fluctuating flow or varying upstream pressure. A hydraulic ...
Tecnidro
Pressure: 0 MPa - 0.9 MPa
Temperature: 0 °C - 60 °C
This Exhaust Needle Valve controls the exhaust flow rate. The valve can be attached directly to a solenoid valve. Best suitable in case a cylinder, etc has no sufficient space around ...
DN: 3 mm - 12 mm
Pressure: 0.1 MPa - 0.7 MPa
Temperature: 5 °C - 60 °C
Best suitable for high-speed drive cylinder. Possible to control high-speed cylinder. Exhaust needle valve type, whose exhaust port incorporates throttling function, is available. Tube O.D. 3mm is available for ...
DN: 4, 6, 8, 10, 12 mm
Pressure: 0 MPa - 0.6 MPa
Temperature: 0 °C - 60 °C
Pressure control valve saves compressed air consumption. In driving an actuator under high pressure, compressed air can be saved by use of the pressure controller to reduce the pressure only during home return. Controls ...
DN: 10 mm - 40 mm
3 way FFF PVC Diamant ball valve with manual override 3-way FFF PVC with connection kit and emergency manual override Version with threaded or to-be-glued connections Available with T or L sphere
Comparato Nello S.r.l.
DN: 15, 20, 25 mm
Pressure: 16 bar
Temperature: -10 °C - 110 °C
2 way MM BRASS Diamant ball valve 2-way MM BRASS with caps and tangs Full bore PN16 Code - Size - DN - PN - KVS DC2A2A - 1/2" - 15 - 16 - 16,3 DC2B2A - 3/4" - 20 - 16 - 29,5 DC2C2A - 1" - 25 - 16 - 43
Comparato Nello S.r.l.
DN: 20, 25 mm
3 way MMM BRASS Diamant ball valve 90° – DIVERTING / MIXING 3 vie MMM in OTTONE con codoli e calotte Passaggio totale PN16
Comparato Nello S.r.l.
DN: 0.125 in - 1 in
Pressure: 0.8 bar - 10 bar
Temperature: 0 °C - 70 °C
... unidirectional connection, non-return valves, slide valve, quick exhaust valve Flow regulators 041, 042, 043 Unidirectional flow regulator (block shaped) Valves in ...
DN: 0.125, 0.25 in
Pressure: 0 bar - 8 bar
Temperature: 0 °C - 70 °C
... unidirectional connection, non-return valves, slide valve, quick exhaust valve Flow regulators 041, 042, 043 Unidirectional flow regulator (block shaped) Valves in ...
DN: 50 mm - 1,200 mm
Gate Valve with a drain valve body material: Carbon steel /Stainless steel / Alloy steel /Special (Monel /Inconel /Hastelly etc.)/alloy steel/ Al-bronze end connection: RF/RTJ/BW operation: Hand ...
Athena Engineering S.r.l.
DN: 50 mm - 900 mm
Pressure: 16 bar - 250 bar
... Entry ball valve body material: Carbon steel /Stainless steel / Alloy steel /Special ( Monel /Inconel /Hastelly etc.) end connection: RF/RTJ/BW operation:Lever Gear motor/pneumatic actuators product overview:Athena ...
Athena Engineering S.r.l.
DN: 50 mm - 1,400 mm
Pressure: 16 bar - 420 bar
... soft-seated trunnion mounted ball valves are designed according to API6D standard and be offered two-piece and three-piece split body designs. The valves can be applied in wide pressure and temperature ...
Athena Engineering S.r.l.
Pressure: 1.2 bar - 10 bar
Flow rate: 0 l/min - 300 l/min
AWF
Pressure: 13 bar - 50 bar
Temperature: -29 °C - 204 °C
AWF
AWF
DN: 25 mm - 100 mm
Pressure: 6 bar - 10 bar
Temperature: -10 °C - 140 °C
The INNOVA G-type valve is a pneumatic flow control single seat valve for hygienic applications. Its main function involves regulating flow, controlling pressure and level. The plug’s ...
DN: 25, 40, 50, 65, 80 mm
Pressure: 0 bar - 10 bar
Temperature: 121 °C
... of the pipe system. The valve can incorporate a handle designed to partially open the valve. When the handle is kept in the open position during the CIP process, the cleaning products can pass through ...
DN: 2, 2.5 in
Pressure: 1 bar
Temperature: 60 °C
Pressure-vacuum valve is a valve designed to maintain atmospheric pressure inside the tank while it is being filled or emptied. Pressure-vacuum valve is widely used in the food-processing, ...
DN: 40, 300 mm
Pressure: 10 bar
Temperature: -10 °C - 150 °C
Cast iron (GJL 250) PN 10 gate valve flat body inside screw stainless steel (AISI 304) trim 150°C (max) Main characteristics • Manufactured in Italy in accordance with EN 1171 • Face-to-face length according to EN ...
DN: 6.35 mm
Pressure: 250, 160 psi
Temperature: -29 °C - 66 °C
... Pressure Control Valve provides regulated pressure to operate a variety of Williams pneumatic metering pumps. It features an economical pressure regulator capable of output pressures of 0-125 psi (0-862 Kpa). The Pressure ...
DN: 15 mm - 200 mm
Temperature: 100 °C
... and fluids in all energy and process networks, with no need for auxiliary energy. Type 5610 The pressure-maintaining valve ensures constant primary pressure in steam, gas and fluids in all energy and process networks, ...
GESTRA AG
DN: 0.125, 0.25 in
Pressure: 0 bar - 8 bar
Temperature: 0 °C - 70 °C
... pressure adjustment will be thereby kept steatfy for a long time. h can also be used as an economuer when connected between the valve and the cylinder to operate. Pressure is being saved and rod speed decreased in the ...
DN: 0.125 in - 0.5 in
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 70 °C
The valve is used to section a pneumatic installation. Sliding the sleeve on the rod. both ON and OFF positions can be achieved. When the sleeve is against the rod hexagon. the flcw goes in the arrcw direction (ON), pushing ...
The valves come in various types: The 5207065 valve this type is an adjustable valve with a remote-controlled air and abrasive cut-off system. The S898 valve on the other ...
Pressure: 250 bar
Flow rate: 20 l/min - 80 l/min
... diverter valves and 8-way diverter valves. The 6-way diverter valves can be both single, or stackable. Our range of diverter valves cover from 20 l/min until 80 l/min, ...
... operation is accomplished by using the geared limit switch and the torque switch inside the Limitorque, to move the poppet valve. The rotary vane air motor is compact and powerful. SMBA is ideal actuator for the use ...
DN: 0.375 in - 2 in
Pressure: 10 bar
Temperature: -20 °C - 150 °C
... Coil: The solenoid valve has an electromagnetic coil wrapped around a ferromagnetic core. When an electrical voltage is applied to the coil, it generates a magnetic field around the core. Armature or piston: Inside the ...
DN: 0.375 in - 2 in
Pressure: 10 bar
Temperature: -20 °C - 150 °C
... monitor and adjust the valve position as needed. Fluid Flow: When the engine opens the valve, fluid can flow through the valve opening. The size of the opening can be adjusted continuously ...
DN: 0.25 in
Pressure: 0 bar - 200 bar
Temperature: -20 °C - 70 °C
The rossignol metering valve will be fitted di- rectly to the cylinder valve. Due to the slim conus of the metering spindle the rossignol valve guarantees precise metering. As an ...
DN: 15 mm - 65 mm
Pressure: 0 bar - 10.2 bar
Temperature: 0 °C - 180 °C
... position feedback signal 0-10 V / 4-20 mA (after automatic balance) Control element 2-port/2-way valve, NC (normally closed) as standard, as option 3-port/2-way valve for mixing different media, with ...
DN: 32 mm - 900 mm
Pressure: 6, 2.5, 16 bar
Temperature: -20 °C - 200 °C
PTFE lined centric butterfly valve for corrosive fluids and high-purity applications. Designed and manufactured for over 20 years in Switzerland, Bianca is built for long-lasting use in highly demanding media and environments ...
InterApp AG
DN: 0.5 in - 6 in
Pressure: 1 bar - 13 bar
Temperature: -15 °C - 180 °C
Model RET-DS / REF-DS are the Direct Acting Pressure Reducing Valve designed with Duplex Stainless Steel material providng more options for different industries. Pressure Reducing Valve protecting the ...
Elite Line Industrial Corp.
DN: 3, 4, 6 in
Pressure: 14.2 psi - 170.6 psi
Temperature: -15 °C - 80 °C
... Application of Groove End Pilot Control Pressure Reducing Valve Our Groove End Pilot Control Pressure Reducing Valves are most suitable for Hydraulic systems. Hydraulic Pressure Reducing Valves ...
Elite Line Industrial Corp.
DN: 1.5 in - 56 in
Pressure: 0.3 psi - 8 psi
Temperature: -15 °C - 80 °C
... Presssure Sustaining Valve, also known as Back Pressure Valve, or Back Pressure Sustaining Valve, is a valve that maintain required pressure of inlet port by opening ...
Elite Line Industrial Corp.
Type Filter Pressure Reducers Certifications Atex, EAC, PED Body material Aluminium, Stainless Steel AISI 316 series Port connection 1/4" ÷ 1 1/2" Applications Water treatment, Oil & Gas, Paint systems, Plastic/rubber industry
ODE
Type Pressure Reducers Certifications Atex, EAC, PED Body material Stainless Steel AISI 316 series Port connection 3/4" ÷ 1 1/2" Applications Packaging, Water treatment, Automotive, Chemical/Petrochemical
ODE
Type Pressure Reducers Certifications Atex, EAC, PED Body material Brass, Stainless Steel AISI 316 series Port connection 1/4" ÷ 3/8" Applications Packaging, Water treatment, Automotive, Chemical/Petrochemical
ODE
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining