Pressure: 32 bar - 136 bar
Fast and service friendly maintenance With the WIWA 4-ball pumps, you can convey even the most difficult materials. Fields Of Application Paint circulation systems Feed pump Feed ...
Flow: 1 m³/h - 160 m³/h
Pressure: 40 bar
Head: 0 m - 330 m
e-SV vertical multistage pump in stainless steel The Lowara e-SV vertical multistage pump is a highly reliable and technologically advanced multipurpose pump. It’s capable of satisfying ...
Flow: 960 m³/h
Pressure: 9.8 bar
Head: 0 m - 80 m
... -coupled Self-priming Pumps Spec Type:Other Key Features Features: 1. The motor and pump are coaxial conjoined for eliminating fluctuations. 2. Durable mechanical seal prevents from leakage and ...
HIGH VISCOSITY MATERIAL FEEDING PUMP THIN MEDIUM FEEDING PUMP SANITARY FEEDING PUMP HEAT PRESERVATION SLEEVE DESIGN WATER ...
ZHEJIANG XINGSHENG MACHINERY CO.,LTD
Pressure: 600,000 Pa
Power: 0.37 kW - 15 kW
... screw pump can transfer high viscosity liquid/fluid, it can transfer sauce, syrup,mayonnaise, fruit paste,meat paste. Screw pump also can transfer semi-solid products. The single screw pump ...
ZHEJIANG XINGSHENG MACHINERY CO.,LTD
Flow: 300 l/h - 86,400,000 l/h
Power: 0.55 kW - 37 kW
... design lobe pump for transfer this meatpaste, we also can add automatic control system with lobe pump, lobe pump can transfer this meatpaste without manual control. Rotor ...
ZHEJIANG XINGSHENG MACHINERY CO.,LTD
VD Type The DELTA VD fuel unit is an efficient modern oil burner pump with compact design and since its mounting flange, hub and shaft sizes are manufactured to international standards (EN 225), it can ...
Elettromeccanica Delta S.p.A.
Flow: 0.3 us gal/h - 3.2 us gal/h
Pressure: 0.15 bar - 1.2 bar
Power: 15 W
... strokes-per-minute, providing high resolution chemical feed and high turndown capability. Most competitive products operate at slower speeds, resulting in slug feeding, accelerated diaphragm wear and poor feed ...
Walchem
Flow: 0.6 us gal/min - 6.7 us gal/min
Pressure: 150, 290, 73 psi
Fluid temperature: -10 °C - 60 °C
... the EWN-Y Pump: • The EWN-Y Series pump combined with EFS flow sensor provides accurate real-time control and display of the dosing rate. • Set point control allows the desired flow rate to ...
Walchem
Flow: 4 us gal/h - 20 us gal/h
Pressure: 30 psi - 150 psi
Fluid temperature: 0 °C - 60 °C
... the E-Series metering pumps. EHE Series pumps have outputs up to 20 GPH (75 l/h) and pressure capabilities to 150 PSI (10 bar). Combining the EHE performance with a turndown ratio of 1800:1 yields one ...
Walchem
Flow: 7.5 m³/h
Pressure: 10 bar
Head: 98 m
Pumps of the series AOH have a segmental type construction with open vane wheel impellers. The program comprises 4 sizes with up to 4 stages for the sizes 1100/1200 and up to 3 stages for the sizes 3100/3600. Applications: The ...
Flowserve SIHI Pumps
Flow: 7.2 m³/h
Pressure: 25 bar
Head: 250 m
The ADH pumps are self-priming side channel pumps capable of handling gas along with the medium and operates at a low noise level. These pumps have a segmental construction with open ...
Flowserve SIHI Pumps
Flow: 2 m³/h
Pressure: 6 bar
Head: 27 m
Single stage, vertical side channel pump with an open vane wheel impeller. The program comprises 3 sizes. Because of the vertical arrangement of the unit, the floor space requirements are low. If the pipelines are of ...
Flowserve SIHI Pumps
Flow: 0 us gal/min - 725 us gal/min
Pressure: 0 psi - 580 psi
Head: 0'00" ft - 1200'00"
... models available Additional configurations include e-SVE Smart Pump and Packaged e-SV Hydrovar e-SV Pump The e-SV fabricated vertical multi-stage pump is an energy saving, non-priming ...
Flow: 720 m³/h
Pressure: 16 bar
Head: 110 m
Slurry pumps have been designed for pumping liquid containing solid particles. Slurry pumps changes in design and construction to adjust to multiple type of slurry which varies in concentration of solids, ...
Flow: 240 m³/h
Pressure: 32 bar
Head: 320 m
Vertical inline pumps are supplied with different material of construction suitable for high pressure application. The inline construction simplifies the piping work and major saving on floor space compare to other type ...
Flow: 0 m³/h - 810 m³/h
Pressure: 30 bar
Head: 0 m - 1,110 m
Horizontal multistage centrifugal pump consists of two or more impellers on the same shaft. Each stage consists of an impeller and ring section casing. Dynamically balanced impellers are provided with replaceable wear ...
Flow: 1.8 l/h - 6.6 l/h
Pressure: 0.7, 1 MPa
Power: 20 kW - 24 kW
The optimum for gaseous liquid feeding This type equips automatic air vent mechanism. An air vent valve built-in pump chamber enables reliable air venting. Also equipped manual air vent ...
Flow: 8 m³/h
... QDLF is a latest vertical multistage pump with light weight. It has the features of energy-saving, environmental friendly, less space demand, easy installation, stable performance and convenient maintenance. The pump ...
Flow: 8 m³/h
Fluid temperature: -15 °C - 120 °C
... QDLF is a latest vertical multistage pump with light weight. It has the features of energy-saving, environmental friendly, less space demand, easy installation, stable performance and convenient maintenance. The pump ...
Fluid temperature: -15 °C - 120 °C
... QDLF is a latest vertical multistage pump with light weight. It has the features of energy-saving, environmental friendly, less space demand, easy installation, stable performance and convenient maintenance. The pump ...
Flow: 6,000 m³/h
Fluid temperature: 250 °C
CUP-FWP - feed water pump Product Category: NUCLEAR PUMPS Reactor feed water pumps are designed and constructed to withstand specific site environmental...... Reactor ...
Flow: 2.5 l/min - 46.5 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 100 m
The PM V103 gear pump was designed for transfer and dose chocolate and its derivatives. These applications require temperature control to keep all their properties and characteristics. The temperature constancy is essential ...
Flow: 0.1 l/min - 0.5 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 100 m
Flow: 0 us gal/min - 280 us gal/min
Length: 821 mm
Width: 411 mm
... double-diaphragm (AODD) pump quickly delivers the on/off reliability you need and provides rapid transfer of chemicals safely and confidently. Suitable for bulk chemical transfer and waste treatment (filter press feed) ...
Flow: 3 m³/h - 1,000 m³/h
Pressure: 27.5 MPa
Head: 2,450 m
... petrochemical, coal chemical, water injection, pipeline, boiler feed water, etc. Refinery, oil and natural gas, petrochemical coal chemical industry, water injection, pipeline, boiler feed water, etc.
Flow: 25 m³/h - 2,700 m³/h
Pressure: 31 MPa
Head: 2,600 m
... petroleum products, water, seawater and other liquids that are pure or contain a small amount of impurities; Crude oil, refinery, petrochemical, water injection, pipeline, boiler feed water, condensed ...
Flow: 2 m³/h - 1,000 m³/h
Pressure: 27 MPa
Head: 2,400 m
... the pump's overall efficiency reach the international leading level. Forged pressure-bearing parts, precision casting flow parts, special friction ring surface treatment technology, reasonable bearing configuration and ...
Flow: 0 m³/h - 20 m³/h
Pressure: 0 bar - 10 bar
The WANGEN MX-T serie: Suitable for aqueous to highly viscous media. Cassette design with minimal dead space Short assembly length Uniform metering with low pulsation Quick and easy to clean Benefits and Characteristics little ...
WANGEN Pumpen
Flow: 0 m³/h - 100 m³/h
Pressure: 0 bar - 20 bar
hygienic progressing cavity pump Type WANGEN MX-F The WANGEN MX-F is a hygienic progressing cavity pump for emtying drums and vessels that contains high viscous mediums. The pump is ...
WANGEN Pumpen
Flow: 30, 40, 85, 150 m³/h
Pressure: 9, 12 bar
... foreign matter several fermenters can be filled with one feeding system low Life Cycle Costs various hopper sizes available, including wear protection modular design for high flexibility pump delivery ...
WANGEN Pumpen
Flow: 1 m³/h - 10 m³/h
Pressure: 12 bar
Power: 1.5 kW - 5.5 kW
Piston Pump - "Libra" Series from 1 to 10 mc/h Pressure up to 15 bar Many materials configuration For pressure transfer of viscous liquid For sludge feeding of Filterpress For chemical Industry, ...
Flow: 0 m³/h - 10 m³/h
Head: 0 m - 100 m
Power: 3, 4 kW
... installations and is ideally suited for use as a feed pump for filter systems, for pumping coolants and in cooling/temperature systems within the machining industry. Due to a wide variety of materials, ...
Flow: 0 m³/h - 50 m³/h
Pressure: 0 bar - 52 bar
... range of force feeding progressing cavity pumps – IVA-LVA-GVA Series. IVA/LVA/GVA pumps are fitted with a feeder hopper and a conveyor screw. The open-throat design allows the fluid ...
Flow: 0.003 m³/h - 300 m³/h
Pressure: 24 bar
... non-sticky fluids with high viscosity or low capacity to flow and requiring manual feeding or gravity fed pumps. Benefits of PCM EcoMoineau™ MVA - MVA FF - MSH cake pumps Product ...
Flow: 0 l/min - 15.1 l/min
Pressure: 0 psi - 180 psi
Fast Flo 1:1 pumps are designed to operate at air input pressures up to 12 bar, 1.2 MPa (180 psi) and deliver a smooth, reliable flow. Drum length and stubby models are available for either drum transfer or wall mount ...
GE Steam Power’s feedwater pumps continually demonstrate reliability and outstanding performance under all operating conditions. GE Steam Power Systems' feedwater pumps Our first manufactured feedwater ...
Flow: 20 m³/h - 18,000 m³/h
Pressure: 17 bar
Head: 5 m - 150 m
Premium design white cast iron pump for long service life handling severe slurries. The maintenance-friendly single-wall construction and heavy section white cast iron wet end combined with the cartridge bearing assembly ...
KSB
Flow: 681 m³/h
Pressure: 3,792,000 Pa
Head: 305 m
Two Stage, Horizontally Split Case Pumps designed for Boiler Feed, Mine dewatering and other applications requiring moderately high heads with a wide range of service conditions. Applications Boiler ...
Goulds Pumps
Flow: 1.8 l/min
Pressure: 160, 20 bar
Fluid temperature: 5 °C - 80 °C
High-pressure piston pump, stainless steel, for AirCoat applications 160 bar and 1.8 l/min max. Ideal e.g. for professional single coating work stations production and for workshops. Excellent coating results ...
WAGNER
Flow: 24,000 l/h
Pressure: 250, 15 bar
Fluid temperature: 350 °C
... inlet geometries are just as possible as versions in the LowNPSH Design. Pumps with shortened inlets guarantee the quick feed of melt to the gear pumps. All POLY discharge pumps ...
WITTE PUMPS & TECHNOLOGY GmbH
Please specify:
Help us improve:
remaining