- Hydraulics - Pneumatics >
- Pump >
- Feed pump >
- SAMES KREMLIN
SAMES KREMLIN feed pumps
Flow: 5.1 l/min
Pressure: 10, 6 bar
Fluid temperature: 60 °C
... its compacity, the 02C85 pump saves waste during flushing and quick color changes. The fluid section special design combined to GT seals allow priming at very low pressure for a large range of viscosities. DESCRIPTION Compact ...
SAMES KREMLIN
Flow: 1.9 l/min - 49.2 l/min
Pressure: 20.7, 34.4 bar
Fluid temperature: 0 °C - 246 °C
Lubrication, Fluid Transfer, Filtration, Fuel Oil, Oil Burner Feed, Compressor, Refrigerators, Gear Boxes, Transmissions, Engines
Tuthill
Flow: 0.03 l/min - 0.13 l/min
Pressure: 0.7 MPa - 1 MPa
Fluid temperature: 10 °C - 40 °C
... the pump chamber. However, dosing capacity is kept setting volume due to feed back control with the flow signal. When large volume of gas comes into the pump chamber, pump ...
IWAKI
Flow: 400 l/s
Head: 250 m
Power: 400 kW
Vertical lineshaft pumps with submerged pump bowl, lineshaft and drive unit on the surface, for installation in deep wells or tanks. Featuring an extremely solid and reliable construction design, they ...
Caprari
Flow: 0.21 us gal/h - 2 us gal/h
Pressure: 50 psi - 250 psi
... EXCEL® AD is a solenoid pump that gives you improved electro-magnetics to meet your specific flow and pressure requirements, up to 250 psi (17.2 Bar) with capacities between .002 and 2.0 GPH (.8 to 7.6 l/h). The EXCEL ...
Flow: 100 m³/h - 300 m³/h
Pressure: 40 bar - 80 bar
Leistritz screw pumps of the L3MF/MG series are triple screw single volute, self-priming positive displacement pumps for medium pressure duty, suit-able for transport of non abrasive lubricating fluids. User ...
Flow: 0 m³/h - 250 m³/h
Pressure: 0 bar - 16 bar
Head: 0 m - 65 m
... Reliability: the pump is equipped with reliable oil lubricated bearing bracket, especially developed to be suitable even under heavy duty service. Design: UTN range share the same hydraulic design with the UCL series ...
CDR Pompe
Flow: 0 l/min - 0.204 l/min
Pressure: 10 psi - 3,750 psi
... of chemical feed and core flooding applications The 500D is ideal for a wide range of chemical feed applications requiring flow rates up to 204 mL/min at pressures up to 259 bar (3,750 psi). With its ...
Teledyne Isco
Flow: 0 m³/h - 120 m³/h
Head: 0 m - 300 m
... Agriculture irrigation: sprinkler irrigation, drip-feed irrigation Food & beverage industry Fire-fighting system TYPICAL APPLICATIONS: Building Water Supply Fire Fighting System Boiler Feed ...
Fluid temperature: -40 °C - 80 °C
ZX series self-priming centrifugal pump is mainly composed of the gearbox for speed increasing, pump body, impeller, inducer, mechanical seal, etc. ZX series pumps are suitable for conveying ...
Flow: 0.3 m³/h - 25 m³/h
Pressure: 14, 10 bar
Fluid temperature: -85 °C - 260 °C
... Series™ internal gear pump is the perfect solution for soaps & surfactants, acids & caustics, and more due to its stainless steel construction and jacketed bracket. Features & Benefits Cast iron mounting bracket ...
Flow: 0 us gal/min - 4,500 us gal/min
Pressure: 0 psi - 1,500 psi
... RPM from the pump, allowing control over the amount of stuffing pressure Benefits (G4 Pump) Universal joint is out of flow path for unobstructed flow to pump cavity inlet Wide sweep ...
Moyno
Flow: 140 us gal/min
Head: 16.8 m
A superior commercial in-line pump based on the established Aurora Pump 320 Series has successfully met the severest demands of high temperature condensate service and boiler feed applications. ...
SHURflo
Flow: 12 m³/h - 60 m³/h
Head: 20 m
Power: 11 kW
Flow: 0 m³/h - 1,500 m³/h
Fluid temperature: 90, 100 °C
The pumps of the APM series are high pressure Multicellular Centrifugal Pumps. These pumps are used to transfer clean or slightly dirty fluids that do not contain abrasive materials. The ...
Bombas Ideal
Flow: 700 m³/h
Pressure: 75, 10 bar
Head: 700 m
The WH type, multi-stage rotodynamic pumps The WH series pumps are centrifugal, multi-stage horizontal pumps with ring sections with closed impellers and centrifugal-centripetal stators. ...
Hydro-Vacuum
Flow: 2.5 m³/h - 35 m³/h
Head: 200 m - 330 m
Power: 0.37 kW - 55 kW
... self-priming, gas handling side channel pumps also handle liquids not containing solid matter and can be used for hot water applications or applications with great suction heights, for example boiler feed ...
Flow: 0.3 m³/h - 30 m³/h
Pressure: 10 bar
Head: 310 m
... Surface Pumps EOH are Horizontal Multistage Vane pump. Self Priming in construction and suitable to handle 2 phase fluid with up to 20% gas mixture. This pump are used for clean fluid ...
Flow: 310 us gal/min
Head: 790'00"
... Horizontal Flexible Coupled Low NPSH Requirements Compact Design for Easy Installation and Maintenance Quiet, Smooth-Running Design for Longer Life Applications Include: Boiler Feed ...
Aurora Pump
... components Reduces Downtime Increases Slurry Efficiency Maintains consistent pressure to Hydrocyclones The bottom line is the UMD pumps more tons per kilowatt while lasting longer than the competition. millMAX UMD™ ...
Flow: 5 m³/h - 600 m³/h
Head: 14.5 m - 120 m
... centrifugal pump Product overview: CLZ vertical Marine self-priming centrifugal pumps are suitable for all kinds of ships and warships as ballast pumps, bilge pumps, ...
Hebei Hengsheng Pumps Co., Ltd.
Flow: 0 m³/h - 700 m³/h
Pressure: 30, 63 bar
Head: 0 m - 550 m
Design Features • Multistage pumps are used in applicatioıns which are needed to high pressure. • Stages are connection serial and it assemble to output of one of the stage is input of other stage. • The total ...
Flow: 7.6 m³/h - 42.8 m³/h
Head: 6 m - 29.5 m
... abrasive and corrosive slurries with foam and froth. When operated, AF pumps can effectively eliminate foam and froth in slurry and will also function properly even with inadequate feeding slurry, thus ...
Flow: 180 l/h - 12,000 l/h
Pressure: 10 bar - 400 bar
Power: 11 kW
High Pressure, High Volume Hydraulic Diaphragm Metering Pump JYT Capacity range 180-10000lph, 10-400bar JYT series hydraulic metering pump are excellent and reliable chemical feeding ...
Flow: 0 m³/h - 400 m³/h
Pressure: 0 bar - 48 bar
The hopper pump from Nova Rotors s.r.l. come with a feeding conveyor that is ideal for transferring products that are highly viscous, and are characterized with a high solid percentage that starts at ...
NOVA ROTORS s.r.l.
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining