SAMSON control valves

... critical. Compared to standard valves, these valves provide a minimal dead space between screw and valve, which result in a higher mixing accuracy and optimal possibilities for cleaning. The ...

Pressure: 350 bar
Temperature: -18 °C - 105 °C

Connect one end to a Quick-test hose and the other to the process connection then turn the knob to control the pressure • Easily control pressure of a closed system • Fine tune pressure to a ...

Pressure: 350 bar
Temperature: -18 °C - 54 °C

Install in a test bench or control panel for easy access and control • Non-rising stem vernier controls smoothly • Floating piston head makes o-ring wear very low

DN: 8, 10 mm
Pressure: 16 bar
Temperature: 0 °C - 90 °C

... triangular key against unauthorised removal of water valve body and sampling pipe can be rotated 360° PTFE seat gasket can be attached to all Kemper valves with test/drain-port valve ...

DN: 8, 10 mm
Pressure: 16 bar
Temperature: 0 °C - 90 °C

... stainless steel sampling pipe can be disinfected by flame valve body and sampling pipe can be rotated 360° can be attached to all Kemper valves with test/drain-port valve ...

DN: 0.25 in - 2 in
Pressure: 63 bar
Temperature: -20 °C - 200 °C

AISI-316 · BSPP ISO-5211 mounting pad to mount directly actuators Characteristics •General industry application. •Blow-out proof stem design. •100% tested with air & water (Open/Close). Specifications •Ends: BSPP threaded ...

DN: 2 in - 12 in
Pressure: 150 psi

... SIZE: 2＂～12＂ JOINT END: FLANGE (ANSI /DIN / JIS/ CNS) WORKING PRESSURE: 150PSI Key words: CPVC pneumatic butterfly valve

DN: 2.5 in - 12 in
Pressure: 150 psi

... SIZE: 2-1/2＂～12＂ JOINT END: FLANGE (ANSI /DIN / JIS/ CNS) WORKING PRESSURE: 150PSI Key words: CPVC electric butterfly valve

DN: 2.5 in - 8 in
Pressure: 150 psi

... 2-1/2＂～8＂ JOINT END: FLANGE (ANSI /DIN / JIS/ CNS) WORKING PRESSURE: 150PSI Key words: CPVC handle type butterfly valve

DN: 0.25 in - 1.25 in
Temperature: -10 °C - 100 °C

Excluded from 97/23/EC directive (article 3 § 3) -POM/PTFE ball seats; NBR other seats - Reduced bore- The shown images can differ from the actual product. Technical data & prices are subjected to be changed without prior notice.

DN: 12 mm

Model: - Level gauge valve with handwheel Connection: - Thread BPS 1/2" Application: - Liquids (water, fuel and oil)

DN: 6.35 mm - 12.7 mm
Pressure: 16 bar
Temperature: -10 °C - 90 °C

Model: - Straight gauge valve - Material body: - Brass CW 617 N according to EN 12165 Connection: - Thread male/female BSPP - Material stem: - Brass CW 614 N according to EN 12164 Material Handle: - Polypropylene Material ...

DN: 40 mm - 300 mm
Pressure: 25, 16, 10 bar
Temperature: 40 °C

... operation The flow–control valve completely hydraulically ensures a pre–determined maximum flow, irrespective of any changes in the operating pressure. The nominal flow rate can be progressively ...

DN: 40 mm - 300 mm
Pressure: 25, 16, 10 bar
Temperature: 40 °C

The main valve is a hydraulically operating diaphragm valve. The work energy is the inherent medium. Most valve types operate purely hydraulically without any foreign energy. Application ...

DN: 40 mm - 300 mm
Pressure: 25, 16, 10 bar
Temperature: 40 °C

... open/close valve hydraulically opens or closes for the electric actuation via the solenoid valve fitted on the control line. The valve is shut when the power is off. ...

DN: 15 mm - 200 mm
Pressure: 16, 40, 63 bar

• Flanged Standard: JB/T74-86.2 GB/T9112-9124 ANSI B16.1 B16.5 B16.24 • Body Material: WCB/CF8/CF8M • Disc Material: SS316 SS316L • Packing: PTFE/Flexible Graphite • Gasket: Spiral-wound graphite-filled Stainless Steel/PTFE/Soft ...

DN: 20 mm - 300 mm
Pressure: 16 bar

• Flanged Standard: JB/T74~86.2 GB/T9112-9124 ANSI B16.1 B16.5 B16.24 • Disc Material: CF8/CF8M/CF3M • Packing: PTFE/Flexible Graphite • Gasket: Spiral-wound graphite-filled/ Stainless Steel/PTFE/Soft Metal • Options: ...

DN: 25 mm - 100 mm
Pressure: 0.2 bar - 10 bar
Temperature: -10 °C - 140 °C

... extraction of the valve by means of 4 screws while the flanges welded to the installation remain fixed. Sanitary butterfly valvescan be operated automatically through an actuator (sanitary pneumatic butterfly valve, ...

DN: 25 mm - 100 mm
Pressure: 0.2 bar - 10 bar
Temperature: -10 °C - 140 °C

The A470 leakage butterfly valve can be used in most liquid product applications in the food-processing, pharmaceutical and chemical industries. The valve A470 offers a safe separation of products and ...

DN: 25 mm - 100 mm
Pressure: 6 bar - 10 bar
Temperature: -10 °C - 140 °C

... Open lantern allows visual inspection of shaft sealing. 360º adjustable body. The valve is authorized to carry 3-A symbol. Note: Consult the options of the valves authorized to carry 3-A symbol. Parts ...

DN: 25 mm - 1,000 mm
Pressure: 1 mbar - 16,000 mbar
Temperature: -40 °C - 230 °C

Plastic lined butterfly valves SBP are available in either wafer or lug style for on/off, throttling or control applications for liquid, powdery media or gaseous service. Main features • Large selection ...

DN: 50 mm - 1,200 mm

Kolk gate valves are made of ductile iron GJS-400/500 (DIN1693 GGG-40/50). Designed acc. to EN 1074-2 (DIN 3352-4) and EN 1171, flange drilling acc. to EN 1092-2 (ISO 7005-2). Face to face acc. to EN 558-1 (DIN 3202-1 ...

DN: 15 mm - 150 mm
Pressure: 16 bar
Temperature: 10 °C - 150 °C

Pressure reducing regulators zCON Material: Grey cast iron Working position: Vertical FEATURES · high tightness (tightness class – IV acc. to EN – 12266 – 1) · compact construction · ecologically safe · ...

DN: 15 mm - 150 mm
Pressure: 16, 25 bar
Temperature: -10 °C - 350 °C

Bellow control valve with pneumatic actuator and positioner zCON Material: Grey cast iron, nodular cast iron Working position: Vertical Features •high tightness (leakproofness class – A ...

Pressure: 6 bar - 10 bar
Temperature: 121, 135, 130, 150 °C

The valve body of the RIEGER aseptic valves is hermetically sealed from the environment, thus ensuring the perfect protection for your liquid product. The pocket-free design of the valve ...

Pressure: 6 bar - 10 bar
Temperature: 150, 130 °C

RIEGER hygienic single seat valves are used, when a maximum level of productivity, safety and quality is requested. They are found in plants of the dairy industry and the food industry. The advanced valve ...

Pressure: 6 bar - 10 bar
Temperature: 130, 150 °C

... food and dairy industry. The design of its one-piece valve body and the radial sealing of both valve seats along with the balanced valve disks enable a perfectly safe CIP/ IP cleaning, ...

... below the valve. The float mechanism may be located remotely from the main valve. See the technical data sheet on Model CF1-C1 Float Control for additional information. This is a hydraulically ...

... and/or stuffing boxes are not allowed and there shall be no pistons operating the main valve or pilot controls. The Cla-Val Model 40-01 Rate of Flow Control Valve prevents ...

Pressure: 285, 300 psi
Temperature: 180 °F

The Cla-Val Deluge Valve is designed for use in controlling water flow to Deluge, Pre-Action, or Foam-Water type fire protection sprinkler systems. This valve is UL Listed in “Special Systems Water ...

DN: 15 mm - 300 mm
Pressure: 4 bar - 100 bar
Temperature: 60 °C

QUICK-CLOSING VALVE SELF-MEDIA OPERATED In addition to the well proven quick closing safety shut-off valves in standard design with actuator controlled by means of instrument air, the self-media operated ...

DN: 200 mm - 400 mm
Pressure: 1.2 bar
Temperature: 180 °C

... for high amount of operating cycles High-performance valve with a long service lifetime OPERATION DETAILS The quick-closing valve is actuated by a pneumatic actuator with a solenoid control ...

DN: 15 mm - 25 mm
Pressure: 16 bar
Temperature: 180 °C

... High-performance valve with a long service life H2-ready OPERATION DETAILS The quick-opening valve is piloted by means of the pneumatic actuator either with a separate solenoid control ...

DN: 0.25 in - 0.5 in
Pressure: 6, 16 bar

manometer gauge cock, light design, female thread x female thread, material: brass

DN: 25 mm
Pressure: 800,000 Pa
Temperature: 0 °C - 55 °C

The Adjustable Non-Return valve is an innovative solution for fluids flow adjustment (style needle-valves) with a self-cleaning mechanism and integral reliable ball-based non-return valve. Its ...

DN: 100 mm - 300 mm
Pressure: 102 bar
Temperature: 60 °C

... HBC 975 is a safety device, also called slam-shut valve, suitable to quickly interrupt the flow of a gas when the pressure existing in the control point reaches the set calibration value. It is a valve ...

DN: 1 in - 10 in
Pressure: 102 bar
Temperature: 60 °C

... slam-shut valve, the subséquent restoration of the normal operating condition, also cailed RESET operation , is carried out in a purely manual manner, after having verified and solved the causes that led to such tripping. SBC ...

DN: 2 in - 24 in

CONTROL GAS VALVES Deltaflux The Deltaflux slam shut valve is an ideal solution for all fluid control applications where high differential pressure or great flow rates ...

DN: 40 mm
Pressure: 10, 20 bar
Temperature: 50 °C

all medium contact parts made of Titanium Grade 2 | extremely corrosion-resistant, lightweight and compact | combined shut-off and pressure reducing function | manageable installation, easy-to-maintain owing to the clamp system | especially ...

DN: 40 mm - 80 mm
Pressure: 16 bar
Temperature: 130 °C

Float valves automatically control liquid levels in sealed or open (non-pressurised) tanks and vessels without requiring external energy. The float registers the liquid level and directly controls ...

ARAG® Manual Proportional Spray Control Valves Adjusts flow proportionally to control spray pressure. Key Features 473 Series outlet size: 1 1/4" HB

DN: 6, 4, 8 mm
Pressure: 0 bar - 20 bar
Temperature: 0 °C - 140 °C

... Römer flow and stop valve program consists of throttle, shut-off and check valves. The function fittings offer fine adjustment possibilities for the precise regulation of fluid flows. Throttle valves ...

DN: 0.5 mm - 5 mm
Pressure: 8, 6 bar
Temperature: 0 °C - 80 °C

... allow the greatest possible flexibility. In the EFC-11, the motor and electronics are integrated in the metering valve housing. The control electronics allow the position of the motor to be set via ...

DN: 50 mm - 250 mm
Pressure: 16 bar
Temperature: 0 °C - 80 °C

The float valve is direct action device, the float or buoy is acting by the thrust of the fluid that finally is transmitted to the valve arm and closing seat. Valves are available in ...

DN: 15 mm - 100 mm
Pressure: 16 bar - 40 bar
Temperature: -10 °C - 200 °C

Flanged EN or ASA 2 ways linear control valve available in different materials and pressure ranges with electric, electro pneumatic or pneumatic action.

DN: 10 mm
Pressure: 320 bar
Flow rate: 400 l/min

3/2-way valve cartridge for electric, direct and pilot controls applicable. Connection: DN10

DN: 3 mm
Pressure: 320 bar
Flow rate: 20 l/min

The pilot valve is suitable for applications with permanent pressure. The valve is fitted on the left and right side with a locking lever.