DN: 50 mm - 600 mm
Pressure: 100 bar - 420 bar
... : Athena pressure-seal valves are designed based on API/BS and ASME B16.34. They're widely applied within high temperature and high pressure ...
Pressure seal type globe valve product overview:Athena pressure-seal valves are designed based on API/BS and ASME B16.34. They're widely applied within high ...
DN: 0.5 in - 2.5 in
Pressure: 3.5 bar - 8 bar
Temperature: -10 °C - 180 °C
... SS Liner > - Plate: NBR / VITON > Life: Three Million Cycle Tested > Other Technical Data: - Available on Request - High Pressure 25Kg sériés
Pressure: 13 bar - 50 bar
Temperature: -29 °C - 204 °C
DN: 2.5, 1.5 in
Pressure: 2 bar - 7 bar
... HRTL/HRTR, Fire Hydrant Pressure Reducing Valve, function similar to landing valve, attached in hydrant box serve as connector between pipeline and hydrant hose. Our Fire Hydrant Pressure ...
DN: 15 mm - 50 mm
Pressure: 16 bar - 40 bar
Temperature: -10 °C - 180 °C
The 21IA-IP1 is a 2-way angle seat air operated valve that is capable of providing high flow rates. Its body has been constructed out of stainless steel and it features a corrosion resistant ...
Pressure: 250 bar
CAV-250 Stand-alone high pressure valves for all type of paint types. CVM-250 is a colour valve module to be used for external paint ...
DN: 100 mm - 1,400 mm
Pressure: 2.5 bar - 64 bar
... close the valve following the direction of the flow and allowing to control the change of the water flow without efforts. Either we regulate or stop a water flow in ...
Di Nicola Infinam Srl
DN: 50 mm - 1,200 mm
Pressure: 2.5 bar - 100 bar
Temperature: -45 °C - 250 °C
... butterfly valves type lug, wafer and flanged in ductil iron EN GJS 400 to EN GJS 500 , malleable cast iron GJL 250 and high- nickel NI resist , carbon steel ASTM 216 WCB / N + GP 240GH , fabricated EN ...
Di Nicola Infinam Srl
DN: 50 mm - 800 mm
Pressure: 25, 40, 10, 16 bar
Di Nicola manufactures hydraulic control globe valves for upstream and downstream pressure regulation , flow regulation and level control in tank . The body is made of ductile iron ...
Di Nicola Infinam Srl
DN: 15 mm - 300 mm
Pressure: 16, 25, 40, 64 bar
•Pressure Balance: Bellows, Sleeve Inherent flow feature: straight line, equal percentage, quick opening Executive body signal interface: M12X1.5, M14X1.5 Regulation accuracy: ±10% Actuator: ...
DN: 50, 40, 80, 65, 100 mm
Pressure: 55, 150 bar
... only manual high-pressure valve – up to 150 bar Simplified maintenance for significant time savings and increased efficiency Sturdiness: valve bodies made from solid ...
BARDIANI VALVOLE S.p.a.
Pressure: 0 psi - 6,000 psi
Temperature: -54 °C - 93 °C
High Pressure Instrument Ball Valves offer reliable 1/4-turn shutoff for pressures up to 6,000 Psig (413 bar). These valves feature a Micro-Finished ...
Pressure: 700 bar - 1,500 bar
... NiSoX-Valve technology introduces a complete change in high pressure homogenization technology. The NiSoX-Valve design optimizes different fluid dynamic effects employing ...
DN: 0.375 in - 24 in
Pressure: 2,500 psi
Temperature: 360 °C
The Copes-Vulcan Model F100-40 Sampling Valve was developed to provide positive shutoff and reliable operation for both sampling and containment isolation applications in nuclear power plants. Such high-pressure ...
DN: 2 in - 12 in
... larger valves are equipped with lifting lugs • 8” and larger valves can be equipped with vent and drain valves (Optional) • Antistatic grounding between ball, stem & body Special ...
HABONIM
DN: 2 in - 12 in
Pressure: 420 bar
... -Trap Cavity Relief hole on the upstream sphere of the ball to prevent pressure buildup in the cavity. Single-side or self-pressure-relief sealing for bidirectional full pressure service. Flexible ...
HABONIM
DN: 0.25 in - 8 in
Pressure: 1,494 psi
High Pressure Cryogenic Class 2500, full differential pressure for sizes up to and including 2″ (DN50), differential pressure of up to 103 bar (1494 psi) for sizes 2½” ...
HABONIM
DN: 8 mm - 50 mm
Pressure: 63 bar
Temperature: -25 °C - 180 °C
industry, high temperature, high pressure PRESSURE PFA/PS in bar BODY : CF8M BALL : Stainless steel 316
SOCLA
DN: 8 mm - 80 mm
Pressure: 63 bar
Temperature: -25 °C - 180 °C
industry, high temperature, high pressure PRESSURE PFA/PS in bar BODY : CF8M
SOCLA
DN: 15 mm - 50 mm
Pressure: 100 bar
Temperature: -20 °C - 100 °C
industry, high temperature, high pressure PRESSURE PFA/PS in bar BALL : stainless steel 316 - SEALS : PTFE SPECIAL : ISO EN 5211 top connection, actuation possible
SOCLA
DN: 6 mm
Pressure: 500 bar
... three-way high-pressure ball valves for plate mounting up to 500 bar. Block body design for manifold mounting with either 4 or 6 mounting holes for added safety; improved manifold design ...
STAUFF
DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: 80 °C
Body material Brass Bonnet material Brass PN (End) PN16 End Flanged Contact sealing Stainless steel
TECOFI
DN: 0.25 in - 1 in
Pressure: 350, 400 bar
Temperature: -10 °C - 100 °C
The valve unit is a reduced bore made of solid galvanized steel. It is capable of generating high pressure with a total of 400 bar DN 1/4 up to 3/8 and 350 bar over of maximum pressure. ...
SFERACO
DN: 15 mm - 80 mm
Pressure: 10 bar - 400 bar
Flow rate: 0.1 m³/h - 6.3 m³/h
This valve type is an efficient and durable solution for gas engineering deposit fluid systems, where erosion from solids reduces the life of valve internal components. High pressure ...
Zaklady Automatyki POLNA S.A.
DN: 200 mm
Pressure: 100, 80 bar
Flow rate: 175 m³/h
... K=0.85 – for throttled flow K=0.67 – for cavitation The value of the pressure recovery factor FL may vary between 0.5…1.0 depending on the type of valve. High ...
Zaklady Automatyki POLNA S.A.
DN: 80, 100, 50, 60 mm
Pressure: 250, 320 bar
... circuit of the pump (by-pass). The valve type Z1B-M thanks to its construction, selection of materials and technology is a valve adapted to use in the most difficult working conditions, at a high ...
Zaklady Automatyki POLNA S.A.
DN: 1 mm - 50.8 mm
Pressure: 5 bar - 70 bar
Temperature: -20 °C - 60 °C
The valve model TWIN has unique design that offers for high pressure applications with compressed gas two systems of slam shut for over pressure in only one body valve. ...
DN: 100 mm - 3,000 mm
Pressure: 10, 16, 25, 40 bar
... eccentric valves used for their strength and resistance even at high pressure. Made in high quality ductile cast iron with stainless steel shafts and a welded-on seat ...
DN: 100 mm - 350 mm
Pressure: 5 bar
Temperature: 120 °C
... positively seal against high pressures Replaceable parts for in-line maintenance and prolonged service life End seal displacement pocket to prevent material packing upon closure Unobstructed ...
DN: 1.5 in
Pressure: 2.5 bar - 8 bar
Temperature: -40 °C - 180 °C
... corrosive compressed air 4. Working Temperature: Standard Type: -20°C~+80°C 5. Rotate angle: 90°± 5° 6. Solenoid valve voltage: AC220V or DC24V , or as per customer’s request.
pneumaticairactuator.com
Pressure: 16 bar
... Actuator Ball Valve has simple structure, good sealing performance, no stuck and is easy to operate and easy to open and close quickly, which make it widely used. It has been developed in the direction of high ...
pneumaticairactuator.com
DN: 0.5 in - 8 in
... service conditions. Due to their simple construction, large range of trim types, and available materials, these valves are suitable for a wide range of applications, including also high ...
pneumaticairactuator.com
DN: 0.5 in - 24 in
Pressure: 100 bar - 420 bar
Pressure Seal Gate Valve Provider: Pressure Seal Bonnet Gate Valves, API 600, API 602, ASME B16.34, DIN 3202, 1/2-24 Inch, 600-2500 LB, PN100-PN420, Cast or Forged Steel. Med ...
DN: 0.5 in - 24 in
Pressure: 100 bar - 420 bar
Pressure Seal Globe Valve Provider: Pressure Seal Bonnet Globe Valves, BS 1873, ASME B16.34, DIN 3202, 1/2-24 Inch, Class 600-2500 LB, PN100-PN420. Med Pressure ...
DN: 0.5 in - 2 in
Pressure: 4,000 psi
... sturdy design for high pressure-temperature service, Solid CoCr alloy wedge (optional) ensures low friction and long service life, packing rings are precompressed to 4000 psi to provide a high ...
DN: 2 in - 60 in
Pressure Seal Gate Valve is designed in accordance with API 600 for service of high temperature and high pressure and is widely used ...
wenzhou domos fluid equipment co.,ltd
DN: 2 in - 60 in
Pressure: 16 bar - 160 bar
... and interception equipment. Compared with the centre butterfly valve, the double eccentric butterfly valve is more resistant to high pressure, longer life and good stability. Pressure: ...
wenzhou domos fluid equipment co.,ltd
DN: 2 in - 60 in
Pressure: 16 bar - 100 bar
... structure, and the sealing material is rubber, Teflon and so on. Due to structural limitations, it is not suitable for such industries as high temperature resistance, high ...
wenzhou domos fluid equipment co.,ltd
DN: 2 mm - 32 mm
Temperature: -196 °C - 550 °C
Pneumatic control valve VALVE STYLE Ball valve USAGE Low-pressure service On/off service High-pressure service VERSION ANSI SUPPLY Pneumatic VALVE ...
Please specify:
Help us improve:
remaining