DN: 0 mm - 0.81 mm
Pressure: 135 psi
Flow rate: 0 ft³/h - 20 ft³/h
... liquids. The pressure regulation is accomplished with a low friction diaphragm mechanism. Max Inlet Pressure Rating: The PCFCD is rated for a maximum inlet pressure of 135 psig at 70F. Please contact ...
DN: 2.5, 1.5 in
Pressure: 2 bar - 7 bar
... HRTL/HRTR, Fire Hydrant Pressure Reducing Valve, function similar to landing valve, attached in hydrant box serve as connector between pipeline and hydrant hose. Our Fire Hydrant Pressure ...
DN: 0.25 in
Pressure: 0 bar - 400 bar
Flow rate: 8, 4, 2 l/min
... Valve is controlled by compressed air acting on piston in the cylinder. Valve is kept open by the spring force. When pilot pressure is applied the valve closes. When pilot fluid is ...
DN: 50 mm - 500 mm
... slide valve due to the generated pressure. The closed slider blade effectively prevents the propagation of flames and pressure waves. Fast closing times also enable extremely short installation ...
Pressure: 13 bar - 50 bar
Temperature: -29 °C - 204 °C
DN: 0.25 mm - 14.3 mm
Pressure: 2,500 bar
Temperature: -252 °C - 650 °C
... The 36V system is a stainless steel valve that can be operated using a regulating shaft. It has non-rotating stem that provides dependability, and long service lifespans of the device. It can withstand extreme working conditions and temperature. ...
Maximator GmbH
DN: 1 in
Pressure: 0 bar - 2,965 bar
... Maximator high pressure valves with métal to métal seats have a high level of safety and reliability under adverse operating conditions. These valves may be used both ...
Maximator GmbH
DN: 0.25 mm - 14.3 mm
Pressure: 0 bar - 4,500 bar
Temperature: -252 °C - 650 °C
... Traceability is achieved via a substantial documented data that includes batch number, maximum pressure attained, material number and type designation. Each high pressure valve in the ...
Maximator GmbH
DN: 0.5 in - 2.5 in
Pressure: 3.5 bar - 8 bar
Temperature: -10 °C - 180 °C
... Autoclave and Sterilizer, Ink and Paint dispensing, Industrial compressor bottling and dispensing equipment, textile dying and drying and pharmaceutical. Multiple Function with the same operator - NO / Bi-Directional. Flow ...
DN: 50 mm - 600 mm
Pressure: 40 bar
Flow rate: 16 m³/h - 5,400 m³/h
... PISTON ACTUATED VALVE DESIGNED FOR HIGH DIFFERENTIAL PRESSURES The valve maintains downstream pressure to a constant and pre-set rate of upstream ...
DN: 8, 20, 25, 10, 15 mm
Pressure: 400 bar
Temperature: -54 °C - 232 °C
... NEEDLE VALVE SCREWED ENDS - STAINLESS STEEL 316 (Model : 58523/58525) ...
DN: 8, 15, 20, 25, 10 mm
Pressure: 500, 315 bar
Temperature: -20 °C - 100 °C
... 3 WAYS HIGH PRESSURE BALL VALVE - BSP THREADED - L OR T REDUCED BORE - STAINLESS STEEL 316 ...
DN: 6.35 mm - 50.8 mm
Pressure: 0 psi - 2,000 psi
Temperature: -20 °C - 180 °C
... Product Overview
The two-piece
high-
pressure ball
valve is engineered for industrial service up to 2000 PSI. Body in CF8M stainless steel, available with PTFE or RTFE seats and a blow-out proof ...
MARSVALVEUK
DN: 0 mm - 10,000 mm
Pressure: 0 psi - 150 psi
Temperature: -10 °C - 150 °C
... categories
- Fire‑Safe Ball Valve
- High‑Pressure Ball Valve
- Flanged Ball Valve
- Gate Valve
- Sanitary Ball Valves
Technical ...
MARSVALVEUK
DN: 0 mm - 10,000 mm
Temperature: -20 °C - 450 °C
... -safe ball valve
Technical specifications
- Certification:
MARSVALVEUK
DN: 0.25 in
Pressure: 0 bar - 315 bar
Flow rate: 0 l/min - 80 l/min
... hydraulic flow valve is a precision flow control component for oil-based hydraulic systems. It regulates and stabilizes actuator speed by controlling oil flow, reduces pressure spikes ...
DN: 0.5 in - 6 in
Pressure: 0 bar - 60 bar
... Hyperr Valves Pvt Ltd is a leading manufacturers, supplier and exporter of Pressure Reducing Valves. Our Pressure Reducing Valve is engineered to automatically reduce ...
Hyperr Valves Private Limited
DN: 0.5 in - 6 in
Pressure: 0 bar - 100 bar
... Hyperr Valves Pvt Ltd is a leading manufacturers, supplier and exporter of Pressure Reducing Valves. Our Pressure Reducing Valve is engineered to automatically reduce ...
Hyperr Valves Private Limited
DN: 0.25 in - 2 in
Pressure: 0 psi - 6,000 psi
... Hyperr Valves Pvt Ltd is a leading manufacturers, supplier and exporter of Pressure Reducing Valves. Our Pressure Reducing Valve is engineered to automatically reduce ...
Hyperr Valves Private Limited
DN: 0 mm - 10,000 mm
Pressure: 0 bar - 345 bar
Temperature: -54 °C - 232 °C
... Overview
Precision needle
valve designed for
high-purity natural gas flow control in
high-
pressure systems. Compact, panel-mountable unit available in straight, angle and cross ...
DN: 0 mm - 10,000 mm
Pressure: 0 bar - 206.8 bar
... Diaphragm
Valve
HD Series — 316L Stainless Steel,
High-Purity,
High-
Pressure for Laboratory Specialty Gases
Product Application and Purpose
The
HD ...
DN: 0 mm - 10,000 mm
Pressure: -10 bar - 7,000 bar
Temperature: -273 °C - 2,000 °C
... b>
- HD SERIES high-pressure pneumatic diaphragm valve designed for ultrahigh-purity applications, suitable for semiconductor, laboratory and other high-tech industries.
Features
- High-purity
... carbide alloy
Operating
Pressure: ≤ 10,000 PSI
Operating Temperature: -50°C to 200°C
Product Introduction
AJL Vented Cap Grease
Valve | Hard Seal
High
Pressure ...
DN: 32 mm - 1,200 mm
Pressure: 6, 10, 16, 25 bar
... lining molded under 150-bar pressure, ensuring perfect adhesion and extreme durability. Full corrosion protection: The lining completely covers the valve body interior, preventing any interaction between the fluid ...
Flowrates
DN: 80 mm - 2,000 mm
Pressure: 10 bar - 250 bar
Temperature: -196 °C - 850 °C
... Technical Advantages of Triple Eccentric Butterfly Valves Better trade-off of mass, face-to-face and nominal diameter than other types of metal/metal valves (ball valves, gate valves, ...
Flowrates
DN: 40 mm - 1,400 mm
Pressure: 6, 10, 16 bar
Temperature: -40 °C - 850 °C
... bonneted knife gate valve is designed for high- pressure and high-temperature applications, ensuring maximum reliability for both liquids and gases. Advantages of the KGVB Bonneted Knife ...
Flowrates
DN: 10 mm - 100 mm
Pressure: 16 bar
Temperature: -25 °C - 120 °C
... Automatic Ball Valve with Actuators • Pneumatic actuator, double action -OF -NC -NA • Electric Actuator -220V -24V • Special voltages • Includes end of career – Micro switch – Proximity NAMUR – PNP Proximity ...
DN: 50 mm - 600 mm
Pressure: 4 bar - 10 bar
Temperature: 0 °C - 80 °C
... equipment Use • For sawing of piping systems Fluids • Neutral media and aggressive liquid or gaseous media if the valve components that contact the media are resistant to the service temperature according to the Divatec resistance ...
DN: 25 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 60 °C
... pneumatic rotary actuator. Gas ball valves are mainly used to shut off the gas flow in gas trains or gas installations before and after other equipment like gas pressure regulators, gas meters etc. These ...
Pressure: 250 bar
... Stand-alone high pressure valves for all type of paint types. CVM-250 is a colour valve module to be used for external paint or material supply to an ...
DN: 6 mm - 50 mm
Pressure: 320 psi - 6,000 psi
Temperature: -20 °C - 100 °C
... Subcategory Hercules high pressure - high cycle 1. Seat in "EXTREME"** Less wear comparing with not modify seat. High resistance to stress. 2. Stainless steel ball, coated with ...
OMAL Spa
DN: 2 in - 12 in
... larger valves are equipped with lifting lugs • 8” and larger valves can be equipped with vent and drain valves (Optional) • Antistatic grounding between ball, stem & body Special mechanical design ...
HABONIM
DN: 50 mm - 800 mm
Pressure: 40, 25, 16, 10 bar
Temperature: -50 °C - 400 °C
... Double offset valve as wafer type butterfly valve for high pressure and temperature loads. For installation between flanges EN 1092, PN 10/16/25/40, PS 25 ASME Cl 150/300, ...
GEFA Processtechnik
DN: 4 mm
Pressure: 0 bar - 300 bar
Temperature: -20 °C - 70 °C
... The diaphragm shut-off valve HP 550 is laid out for the use in pure gas supply systems. The diaphragm shut-off valve has 3 inlets and one outlet. Threaded holes on the reverse side connect to a bracket that can be directly ...
Hornung GmbH
Pressure: 0 psi - 6,000 psi
Temperature: -54 °C - 93 °C
... High Pressure Instrument Ball Valves offer reliable 1/4-turn shutoff for pressures up to 6,000 Psig (413 bar). These valves feature a Micro-Finished Floating Ball design ...
DN: 2.5 mm
Pressure: 3 bar - 10 bar
Temperature: 0 °C - 140 °C
... AVS Römer pressure relief valves are used for protection in closed circuits. When the set response pressure is exceeded, the valve opens and discharges the fluid. ...
DN: 50, 40, 80, 65, 100 mm
Pressure: 55, 150 bar
... only manual high- pressure valve – up to 150 bar Simplified maintenance for significant time savings and increased efficiency Sturdiness: valve bodies made from solid bar DESCRIPTION BBZMQ ...
BARDIANI VALVOLE S.p.a.
the best suppliers