Schaltbau contactors

Primary current: 9, 12, 5 A
Load voltage: 690, 600 V

CKDC1 contactors are designed to be used for commercial lightting, industrial equipement, compact space, with smaller volume required by IEC product. 35 mm DIN-Rail installed or panel installed AC or DC coil control ...

Primary current: 20 A - 110 A
Load voltage: 380, 660 V

ACC1 series AC contactor (hereinafter to be referred as contactor), it mainly applies to the circuit of AC 50Hz/60Hz, and rated insulation voltage 660V. When used in AC-3, and rated operational voltage ...

Primary current: 20 A - 50 A
Load voltage: 0 V - 3,600 V

The contactors type HS for both direct (DC) and alternating current (AC) can be used as polarity-independent circuit breakers in electric traction vehicles. They are used primarily as heating contactors, ...

Primary current: 1,000, 1,250 A
Load voltage: 1.1 kV

This series vacuum contactor is suitable for power network of AC 50Hz, the main circuit rated voltage 1140V, rated current is 1000A-1250A, for making, breaking, frequently starting and controlling AC motor, and suitable ...

Primary current: 9 A
Load voltage: 660 V

Meba magnetic contactor MBK09 is suitable for using in the circuit up to the rated voltage 660 AC 50Hz/60Hz,rated current up to 09A,for frequent starting,controlling the AC motor.The addition of auxiliary contact group ...

Primary current: 9 A - 475 A
Load voltage: 0 V - 1,000 V

1.Application CJX1 series AC contactors are suitable for frequency 50/60Hz,rated insulation voltage up to1000V,rated operation current 9~475A under AC-3 duty.It is mainly used for making/breakingelectric circuit at a ...

Primary current: 10 A - 500 A
Load voltage: 280 V - 530 V

Solid State Contactor (SSC) is newlydeveloped SSR application unit that is created by following the AC contactor using mode. It is based on power SSR and equipped with radiator, protection housing, mounting ...

The new CGC series of Telema contactors is native for typical railways environment. Strong and continuous vibrations, heavy duty cycles, limited space available and extended temperature range are just some of the peculiarities ...

Primary current: 6 A
Load voltage: 230 V

- Operation class: АС-3 - Rated current: 6-95А - Rated operating voltage of power contactors: up to 690V; 50/60Hz - Surge voltage wear resistance: >8000V - Rated operating voltage of the coil: 12/24/36/48/110/230/400 - ...

Primary current: 9 A
Load voltage: 24 V

NOARK® Electric Ex9C contactors are intended for various applications including heavy industrial loads. Nine frame sizes allow optimization of electrical parameters and mechanical dimensions. A range of overload relays ...

Primary current: 40, 63 A

40A-63A Single Pole AC Modular Contactor is suitable for using in the circuits the rated voltage up to 40A-63A, for making & breaking, frequently starting & controlling the AC motor. Higher Current 18mm 1MUwidth,maximumcurrentupto63A Greater ...

According to the CEI 17-3 standard, a contactor or remote switch is a mechanical manoeuvring device, generally designed to perform a high number of operations. It is also known as a monostable device because it has a ...

Primary current: 1, 0.1, 6, 3 A
Load voltage: 24 V - 415 V

OF Auxiliary Contact Application • To be mounted on the left side of the MCBs/RCBOs • ON/OFF Auxiliary contact (OF) • It shows the circuit breaker "ON" or "OFF" positions. MX+OF Shunt Release Application • To be mounted on the ...

Primary current: 20 A
Load voltage: 12 V - 240 V

Number of contacts: 2x20 A Confi guration of switching and breaking contacts: 20. 11, 02 For switching of electric circuits, especially for resistave loads and three-phase induction motors number of contacts VS120: 1 number of contacts ...

Primary current: 250, 160, 630, 400 A
Load voltage: 12, 7.2 kV

... series of Medium voltage vacuum AC contactors are widely used in coal, power, metallurgy and textile. High building and other industry departments. Medium voltage vacuum AC contactor is suitable for communication: ...

Primary current: 9 A - 150 A
Load voltage: 24 V - 415 V

... it more reliable. - Pre-wired reversing contactors with mech. interlock also available. - Accessories include top & side blocks, surge suppressors & timers. 53 series contactors includes reversing ...

Primary current: 40, 63 A
Load voltage: 400, 230 V

... occur in illumination applications from time to time, may force the contactor. It has been classified in terms of type behavior and closing-breaking operation for selection. While contactor is selected ...

The type K3-K are low voltage contactors that are specifically designed to convert low-inductive and low loss capacitors in capacitors banks that may or may not be equipped with reactors. These contactors ...

Primary current: 6 A - 20 A
Load voltage: 380 V

Product Item : S-P06 S Specification : standard：GB 14048.4、IEC 60947-4-1、EN 60947-4-1、DIN VDE 0660 Rated insulation voltage：660V Coil control voltage：AC12V~440V/50Hz、AC12V~480V/60Hz Electrical Life/AC3：1.2 million times Mechanical ...

Primary current: 32 A
Load voltage: 440 V

4-pole plus auxiliary contact, 3 TE, low noise32A (AC1), high Power Ratings, compact sizeClimate resistant, ambient temperatures: -40°C … + 60°CSwitching indicator

... capacitors. The contactors used have a long service life that lasts at least 200,000 switching cycles for capacitor banks with tuned reactor. We place value on having the highest reliability and quality for selecting ...

Primary current: 7.2 A - 72 A
Load voltage: 240 V - 660 V

This contactor is specially designed to work for capacitive current switching. It is strong and durable. TECHNICAL SPECIFICATIONS Maximum working voltage: 690 V. Voltage tolerance: – 20 + 20%. Life expectancy under optimal ...

Test contactors are used to determine the performance of electrical devices like micro-electro-mechanical systems (MEMS), sensors, microcontrollers, and integrated circuits. The probes are used in, for instance, the semiconductor ...

It is used for remote control of circuits. (Generally electrical motors, resistances, lighting etc.) There are auxiliary contacts, "Normally open" and "Normally closed". Shows Phase-to-Phase Voltage Values Shows Number ...

... is infrequently switched. These contactors are primarily for use with Direct Current loads, however they can also be used with Alternating Currents. Coil voltages ranging from 6 to 240 are available for this contactor. The ...