Power contactors

Current: 200 A

Some international and national regulations can be applied with the 4 pole DILMP contractors. These contractor series are the enhanced and reinforced xStart contrctor series which are developed for AC1 switched loads. These DILMP contractors ...

Current: 27 A - 45 A
Load voltage..: 24 V - 440 V

... as an additional device. DIL L is a contactor used for lighting and illuminations loads. The DIL L contactor's development was based on the contactor DIL M which has been used for the ...

The DILA-XHIR22 front mounted auxiliary contacts allows users to switch small amount of signals efficiently. Present in the product is one-auxiliary with NO-contact and one-auxiliary NC-contact are embedded be micro switches. Serves effectively ...

Current: 25, 22, 9, 9.5, 7 A

... 1SBL137201R1100 EAN:3471523115019 Catalog Description:AF09-40-00-11 24-60V50/60HZ 20-60VDC Contactor Long Description:AF09 4-pole contactors are used for controlling power circuits ...

Current: 3.7 A - 20 A
Load voltage..: 24 V - 400 V

CI 5 contactors cover the power range up to 5.5 kW and are available for AC and DC coil voltages enabling reliable working with extremely low and high voltage fluctuations.Characteristic ...

Current: 6 A - 40 A
Load voltage..: 24 V - 440 V

The contactor programme CI 6-50 is based on three frame sizes. The smallest frame size consists of CI 6-15 (2.2-7.5 kW), the middle contains the CI 16-30 range (7.5-15 kW) and the largest frame size is represented by ...

Current: 60 A - 130 A
Load voltage..: 24 V - 400 V

The contactor programme CI 61-86 consists of one frame size with three NO main contacts. Coils are standard for dual frequency. A long electrical lifetime makes the CI 61-86 contactors suitable for operation ...

... configured as NO/NC contactor, disconnector or changeover switch. This enables us to react flexibly to changing customer requirements. Features Innovative Design Easily configurable as NO/NC contactor, ...

Current: 600, 400 A
Load voltage..: 96 V

C400 and C600 Series DC contactors are highquality single pole NO contactors for 400 A and 600 A respectively. The compact contactors are especially suited for use as ...

Current: 50 A
Load voltage..: 1,000 V

Single pole high-voltage contactor of compact design: Notwithstanding its small size, the C193 Series contactor features an extraordinary switching capacity for DC applications ...

Load voltage..: 230 V

... is specially-designed for power factor correction capacitor operation the utilization category is AC-6b. The product is pre-charged through resistors that limits the peak current to the contactor when ...

Current: 50, 35, 25, 12 A
Load voltage..: 12 V - 600 V

The SAL Power Solid State Contactor has a 22.5mm highly compact design and can be used out-of-the-box with its heatsink for DIN rail mounting. It is ideal for resistive loads because of its zero cross ...

Current: 75, 50, 35, 25 A
Load voltage..: 12 V - 600 V

22,5mm Solid State Contactor for space-saving design. Ready to use with its heatsink RANDOM Solid State Relay designed for lamps, motors... loads with a fine control like phase angle controllers. Back to back thyristors ...

Current: 35, 32 A
Load voltage..: 230, 400 V

... to 5 000A2s. - Model with diagnostic : status of the SSR and the load . Normally closed status output . Without external power supply . Status visualization by yellow LED (*) . Status output can be chained. - This ...

... switch due to the fact that this latter is used to control relatively low power or signals in an electronic environment, while a remote switch is also used to control much higher power levels.

Current: 250 A - 3,000 A

The High Current Contactors for work pole frameworks Some Features of Druseidt High Current Contactors utilized around tanks within stirring or anodising operations are liable to abnormal amounts of electrical, ...

Current: 20, 40, 63 A
Load voltage..: 230, 400 V

Current: 9 A - 37 A
Load voltage..: 12 V - 600 V

... Front and side-installed auxiliary contacts Coil installed control modules with space saving Reversible coil terminations (power line or load side) 35mm DIN-Rail installed or panel installed Made by environmental protection ...

Current: 60, 72, 85, 43 A
Load voltage..: 9 V - 600 V

... Front and side-installed auxiliary contacts Coil installed control modules with space saving Reversible coil terminations (power line or load side) 35mm DIN-Rail installed or panel installed Made by environmental protection ...

Current: 40, 63 A
Load voltage..: 400, 230 V

Area of Usage - Small engines - At residential and office, at the power control of the last distribution circuit. - Lighting - Heating, pumps and furnaces - Water heating for home ...

Current: 18.5 A - 60 A
Load voltage..: 380, 400 V

Current: 250 A - 650 A
Load voltage..: 380, 400 V

4pole contactors GH16 series for resistive loads AC‐1 utilization category.

For GH contactors is supplied the 4th add‐on switching neutral pole that can be easily mounted on both side of the contactor.

Very high electrical life These contactors are fitted with the same accessories of GH15 series They can not be used as power contactors

Current: 40 A
Load voltage..: 440 V

Multi-pole Power Relay for Contactor Current Range Capable of Carrying and Switching 40 A at 440 VAC • One pole carries 40 A. UL 508 and UL 840 NO contacts (resistive 40 A 480 VAC, ...

Bar mounted contactors are largely used in the iron and steel industry for traction (rolling stock), electrolysis and hoisting equipment for applications from 63A to 5000A. Description The R series contactors ...

Current: 300 A - 600 A
Load voltage..: 1,000 V

XT DC contactors range from 300-600 A and can be used in a variety of applications. The proven hybrid technology ensures a long life span of the devices. Compared to similar DC contactors, ...

Current: 3.7 A - 20 A
Load voltage..: 24 V - 400 V

... additional protection against electric shock made by the secured space intended for the live parts while being installed by the installers and maintenance personnel in accordance to the IEC 60947 edition 5 standard. It ...

Current: 9 A - 38 A
Load voltage..: 400 V

... new WEG CWB line of contactors meets the requirements of a wide range of industrial applications worldwide. Compact Solution Because they are compact, 45 mm wide and available in up to 38 A (18.5 kW @ 400 V), CWB ...

5TT5 8 Insta Contractors bring with them precision quality, thanks to their superior material construct, besides optimized technical features, which always ensure that the AC magnetic system is perfect for use in rugged conditions of ...

Current: 6 A - 630 A
Load voltage..: 120 V - 600 V

Lovato Electric comprehensive line of contactors can be divided in to three basic configurations as illustrated above. Each of these have unique features but all are designed for long life and have finger-safe ...

Current: 75 A
Load voltage..: 120 V

The 3186Y30J75999CJ is a contactor manufactured by TE Connectivity. Operating on a 120 VAC coil rated voltage, it has a contact rating of 75 A and an AC actuating system. In addition, it features a 6-32 screw coil termination ...

Current: 180 A
Load voltage..: 12, 24 V

Particularly compact and resistant, the D.C. contactors series Tecno are suitable for handling machinery using direct current and for industrial electrical vehicles like lift trucks, cleaning machines, ...

Jennings® products are the world's finest non-thermionic vacuum components for high-voltage and high-frequency applications. Features Wide Range of Applications - Long Operating Life: High voltage vacuum capacitors used in RF matching ...

Current: 1 mA
Load voltage..: 5 V

Low profile package Design allows top or side actuation Low actuation force, 35 grams max TYPICAL APPLICATIONS Consumer electronics Medical devices ATCA and MicroTCA devices Contact Rating: 1 mA 5 VDC Electrical Life: 100,000 ...

Load voltage..: 600 V

GE’s 300-Line of NEMA Contactors and Starters are a complete offering from NEMA size 00-9 and in 1 Pole, 2 Pole, 3 Pole and 4 Pole offerings. The 300-Line is a proven product for the toughest industrial applications.

... Three Pole configurations. Convenient DIRECT-WIRING for Right or Left Hand Power Connections. Rugged Terminals on both sides of the Power Poles for all power connections ...