- Hydraulics - Pneumatics >
- Valve >
- Heating valve >
- Schubert & Salzer
Schubert & Salzer heating valves
DN: 10 mm - 100 mm
Pressure: 16, 20, 10 bar
Temperature: 80 °C
general processes, heating and multi-fluid applications compatible with brass BALL : hard chrome-plated brass SEALS : PTFE
DN: 15 mm - 50 mm
Pressure: 20, 25 bar
Temperature: -20 °C - 80 °C
general processes, heating and hall fluid applications compatible with brass BALL VALVE : brass Full bore BALL : hard chrome-plated brass SEALS : PTFE With drain off cock and plug
DN: 10 mm - 50 mm
Pressure: 20, 25, 32 bar
Temperature: -20 °C - 80 °C
general processes, heating and hall fluid applications compatible with brass Full bore BALL : hard chrome-plated brass SEALS : PTFE
DN: 15 mm - 250 mm
Pressure: 16 bar - 40 bar
Temperature: -5 °C - 200 °C
The new KLINGER ball valve Monoball KHO is fully welded and generally used in the sector district heating, heating- and air conditioning and plant construction. The product is durable, ...
KLINGER
DN: 15 mm - 50 mm
Pressure: 20 bar
Temperature: -25 °C - 110 °C
Body material Bronze Check valve material Brass PN (End) PN20 End BSP Female/Female Contact sealing EPDM Operating system Handwheel
TECOFI
DN: 50 mm - 400 mm
Pressure: 25 bar
Temperature: -29 °C - 210 °C
This wafer type device offers 100% tightness with ISO PN25 flanges. The double eccentric device is bidirectional with a preferential flow direction indicated by an arrow. It complies with fire safety according to ISO 10497:2010 regulations ...
SFERACO
... technological process allow these valves to be used for the most demanding conditions in power engineering, petrochemical, heating, chemical industry, metallurgy etc. In Europe they are known as BR12A. We ...
Zaklady Automatyki POLNA S.A.
DN: 25 mm - 400 mm
Pressure: 10 bar - 400 bar
Temperature: -196 °C - 650 °C
various materials of valve body cast and internal parts, adapted to specific working conditions constructional designs limiting the level of generated noise, increasing resistance to cavitation and flashing, ...
Zaklady Automatyki POLNA S.A.
DN: 50, 65, 80, 100 mm
Pressure: 250, 320 bar
Temperature: 250 °C
... technological process allow these valves to be used for the most demanding conditions in power engineering, petrochemical, heating, chemical industry, metallurgy etc. In Europe they are known as BR12B. We ...
Zaklady Automatyki POLNA S.A.
DN: 1 mm - 6 mm
Temperature: -10 °C - 200 °C
Pneumatic control valve VALVE STYLE Globe valve USAGE Throttling service Low-pressure service On/off service VERSION ANSI SUPPLY Pneumatic VALVE ...
Pfeiffer Chemie-Armaturenbau GmbH
DN: 1 mm - 6 mm
Temperature: -10 °C - 200 °C
Pneumatic control valve VALVE STYLE Globe valve USAGE Throttling service Low-pressure service Mixing or diverting service On/off service Mixing service VERSION ANSI MEDIUM ...
Pfeiffer Chemie-Armaturenbau GmbH
DN: 1 mm - 8 mm
Temperature: -10 °C - 200 °C
... control valve VALVE STYLE Ball valve USAGE Low-pressure service On/off service VERSION ANSI SUPPLY Pneumatic VALVE SIZE PRESSURE RATING Class ...
Pfeiffer Chemie-Armaturenbau GmbH
DN: 10 mm - 50 mm
Pressure: 16 bar
Temperature: -10 °C - 200 °C
... leakproofness class – A acc. EN -12266 – 1) •compact settlement •environment-friendly •tests acc. EN – 12266 – 1 Stop valve, ends threaded, form straight 201 Grey cast iron EN-GJL-250 A Nominal diameter (mm) 050 Nominal ...
ZETKAMA Sp. z o.o.
DN: 15 mm - 300 mm
Pressure: 6 bar - 160 bar
Temperature: -60 °C - 550 °C
... drilled according to EN 1092-1 for body material F •face-to-face dimension according to EN 558 series 1 Bellow sealed stop valves, ends flanged, form straight 215 Grey cast iron EN-GJL-250 A Stem and disc connection ...
ZETKAMA Sp. z o.o.
DN: 15 mm - 300 mm
Pressure: 10, 25, 16, 6 bar
Temperature: -60 °C - 450 °C
... acc. EN – 12266 – 1 •flanges drilled according to EN 1092-2 •face-to-face dimension according to EN 558 series 8 Stop valves, ends flanged, angle form 216 Grey cast iron EN-GJL-250 A Stem and disc connection - ...
ZETKAMA Sp. z o.o.
DN: 25 mm - 500 mm
Pressure: 6, 25 bar
Temperature: 200 °C
... of the control device. Several mixing valves may be arranged in line for a multi-stage mixture of several gases. Fuels: gaseous Applications: Industrial boilers, Biogas & Landfill gas, Glass trough heating, ...
DN: 8 mm - 20 mm
Pressure: 160, 100 bar
Temperature: -50 °C - 225 °C
INTEC K110 Mini plant ball valve with female threaded ends. Features DN 8 - DN 20 one-piece ball valve soft seated floating ball FTF dimensions acc. to DIN 3202 part 4-M3 ...
DN: 80 mm - 500 mm
Pressure: 40, 16 bar
Temperature: -29 °C - 225 °C
INTEC K210 Flanged ball valve, trunnion mounted ball, both sides spring loaded seat rings, soft seated. Features nominal sizes DN 80 - DN 500 nominal sizes NPS 3" - NPS 20" two-piece split body ...
DN: 50 mm - 150 mm
Pressure: 16, 10 bar
Temperature: -10 °C - 225 °C
... flanges acc. to EN 1092 top flange DIN EN ISO 5211 full bore INTEC K500 - Tank bottom ball valves Tank bottom ball valve of the modular INTEC system technology! The stem is angularly ...
DN: 15 mm - 300 mm
Pressure: 10 bar - 40 bar
Temperature: -196 °C - 450 °C
Special features • - Consisting of globe valve and actuator Accessories • - Type 2 N Strainer • - Type 2 NI Strainer Options • - Flow divider for noise reduction • - Insulating section
SAMSON
DN: 15 mm - 250 mm
Pressure: 23.8 bar - 40 bar
Temperature: -10 °C - 400 °C
... control, flanged connections according to EN1092-1 PN 40 with prominence. Streamlined flow valves, Streamlined flow valves bellows type, Streamlined flow valves bellows type on carbon ...
Mival
DN: 15 mm - 200 mm
Pressure: 25, 16, 40 bar
Temperature: -10 °C - 450 °C
Service-friendly control valve to DIN/EN with flanged ends, either with linear or equal-percentage control characteristic at Kvs values of 0.1 to 630 m³/h and closing pressures of up to 40 bar; all internal parts are ...
DN: 15 mm - 150 mm
Pressure: 3, 16, 21 bar
Temperature: 220, 300 °C
Improved Quality of Material Being Heated Accuracy of pressure reducing valve's secondary set pressure is within ± 0.01 MPa. Even if the steam flow (load) to the equipment or the primary pressure ...
TLV Euro Engineering
DN: 2.5 in - 24 in
Pressure: 100 psi - 740 psi
Temperature: 0 °F - 400 °F
... performance lug style butterfly valve features a carbon steel body with stainless steel trim. It is ideally suited for commercial, industrial and mechanical HVAC services. The valve performs isolation ...
NIBCO
DN: 20 mm - 150 mm
Pressure: 6 bar
Temperature: 2 °C - 110 °C
... Continuous control of the supply temperature in heating systems in which a certain loss through leakage is desired. Features MH32F: 3-way valves with nominal diameters DN 20...150 MH42F: 4-way valves ...
DN: 1, 1.5 in
Pressure: 80 bar
Temperature: 0 °C - 70 °C
The iValve is the revolutionary new development of Bucher Hydraulics. This valve contains all advantages of the approved LRV-1 and follows trends and changes in the hydraulic market. With the iValve, yor are ready for ...
DN: 20 mm - 100 mm
Pressure: 10, 16 bar
Temperature: 0 °C - 80 °C
Product OverView Exhaust valves are usually applied on the pipelines of independent heating System,central heating supply syestem,heating boiler, central air-conditioning.floor ...
DN: 15 mm - 80 mm
Pressure: 16, 25 bar
Temperature: -10 °C - 220 °C
Three-way control valves for HVAC systems The rugged and varied three-way control valves of A. Hock’s Series 1003 can be converted from mixing version to diverting version and vice versa without any ...
A.Hock MSR u. Electronic Service GmbH
DN: 20, 15 mm
Pressure: 16 bar
Temperature: -20 °C - 90 °C
Built-in valve, F/F threaded, with stop cock, with protection cover.
BONOMI GMBH
DN: 0.5 in - 4 in
Pressure: 0 psi - 250 psi
Temperature: -29 °C - 160 °C
... : ANSI CLASS 150 Operation temperature : -29°C~+160°C Valve body design : ASME B16.42 Maximum operating pressure 250psi BUENO's PFA Lined Ball valves are commonly used ...
BUENO TECHNOLOGY
... performance butterfly valves are widely used in many industries including heating, ventilating and air conditioning, power generation, hydrocarbon processing, water and waste water treatment, marine and ...
DN: 10 mm - 50 mm
Pressure: 16 bar
Temperature: 100 °C
The Siral 3VT- 2000 series is an array of ball valves that can deliver pressure of up to 16 bar in thermal range of up to 100 °C. These ball valves have 3 "T" female threads that measures 1/4" up to 2". ...
SIRAL
DN: 65 mm - 300 mm
Pressure: 16 bar
Temperature: 120 °C
high thightness (leakproofness class - Aacc. EN -12266 - 1) compact settlement environment-friendly tests acc. EN- 12266-1 flanges drilled according to EN 1092-2 flanges ANSI drilled according to ASME B 16.1 class 125 face-to-face ...
VARIMEX-VALVES Poland Sp.z.o.o.
DN: 8 mm - 200 mm
Pressure: 0 bar - 100 bar
Temperature: -50 °C - 305 °C
... Rate A (no leakage) Flange / BW / SW / Tapped Options Heating jacket Sight Glass Check valve Electrical continuity Advantages Face to face: ISO5752-S01 (Flanged) Face to face: EN 12982 ...
DN: 15 mm - 150 mm
Pressure: 20 bar
Temperature: 220 °C
... externally piloted reducing valve for steam service with large-capacity requirements. Typical use is on intermittent service, including applications such as heat exchangers, steam coils, rotating dryers, process equipment ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining