Schubert & Salzer seat valves

... The valve is actuated pneumatically by either the compressor unloader solenoid valve or other pneumatic source on a cycle or regular basis, i.e. Air Dryer actuating source or a locomotive microprocessor ...

DN: 40 mm - 300 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 85 °C

The valves in series 20.900/21.900 are soft seated gate valves, made of ductile iron, manufactured in accordance with severe product norms and relevant norms, and in conformity to EN ISO 9001; They are ...

DN: 13 mm - 45 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 180 °C

... SERIES Angle seat valves - stainless steel In its single acting version, the valve is normally closed (or opened) by spring force. When the piston is moved by the force of the compressed ...

DN: 15 mm - 400 mm
Pressure: 16 bar - 640 bar
Temperature: -196 °C - 550 °C

The 810D Series cage single-seat control valve adopts the top guided unbalanced structure, featured by high strength, heavy load, S type flow channel, low pressure drop loss, high flow coefficient, wide ...

Pressure: 0 bar - 17.5 bar

Automatic Ball Drip Valve is used with ETW-D, NTW, ETD-D and NTD trims of all models of Deluge Valves. • Bronze Construction • Approvals: Part of UL Listed Deluge Valve Trim The ...

DN: 0.5 in - 36 in

... side-entry ball valve is the most common and popular design. Given its great modularity, SRi can manufacture any side-entry ball valves with special options. In case of maintenance operation, all ...

DN: 20 mm - 800 mm
Pressure: 2.5, 1, 1.6 MPa
Temperature: 80 °C

Float Control Valve Shell test pressure: 1.5, 2.4, 3.75MPa Sealed test pressure : 1.1, 1.76, 2.75MPa Suitable medium: water, Sewage Materials: Serial No. - Part - Material 1 - Seat - Cast ...

DN: 12.7 mm - 203.2 mm

... end ball valve with an ISO 5211 compliant direct mount actuation pad. The 10E10 is available in sizes ranging from ½” to 8” with ASME Class 150 flanges. Valve bodies are made of either CF8M or WCB with ...

DN: 10 mm - 80 mm
Flow rate: 4 m³/h - 127 m³/h

Integrated pneumatic actuator NAMUR solenoid mounting pad Compact assembly Visual indicator High Cycle-Life Actuator rotates 360°

DN: 3.96, 8.74, 44.54 mm
Pressure: 259 bar - 1,379 bar

INLINE CHECK VALVES, 316 STAINLESS STEEL BODIES High Pressure. These valves are 316 S.S. ball type and soft seat (PTFE ring) in ;the 1/4 NPT, 1/2 NPT, 3/4 NPT, and 1 NPT sizes; Brass ...

... Actuator to valve direct mount technology for simplified installation Options Electronic switch for remote open/close position option Stainless steel housing Replaceable Seat on needle ...

DN: 25 mm - 200 mm
Temperature: -200 °C - 600 °C

Neles series X modular ball valve, incorporates robust stem to ball connection in seat supported models. Application based seat selection assures valves are capable of ...

Pressure: 0 bar - 0 bar
Temperature: 250 °C - 450 °C

Bakeable leak valves are used to control the flow of gas into a vacuum system from an external source. A soft metal pad is compressed against a harder metal seat, creating the necessary seal for precise ...

Pressure: 28 bar

... Non-rotating self aligning swivel seat disc with fully retained Teflon seat ring •Lower cost than flanged designs •Backseating stem to a I tow for replacing stem packing while under pressure •Protective ...

The Valve seat angle PP30480 has its various types. Those are PP3048020005 (20mm x 1/2"), PP3048025007 (25mm x 3/4"), PP3048032010 (32mm x 1"), PP3048040013 (40mm x 1 1/4"), PP3048050015 (50mm x 1 1/2") ...

DN: 15 mm - 65 mm

Free flow 2-way pneumatic on-off valves are the most effective response to fluid interception. Available in normally closed, normally open, double effect or manual operated.

Sleeved Plug Valve AFC Sleeved plug valves are non-lubricated quarter-turn valves that achieve sealing through the use of a compressible sleeve as a sealing member. In many applications ...

DN: 50 mm - 400 mm
Pressure: 150 psi

KNIFE GATE VALVE rising stem Technical characteristics: stem: rising, SS420 body: cast iron EN-GJL-250 wedge: SS304 coating: blue epoxy powder RAL5015 EPDM seat, bronze nut Nominal pressure ...

DN: 0.25, 0.5, 0.375 in
Pressure: 150 psi
Temperature: 70 °F

The Hayward NVA Series Needle Valves are available in PVC and GF-PP, and they have FPM )-rings and a PTFE seat. The end connections are threaded only, and all valves are constructed with ...

DN: 25 cm - 100 cm
Pressure: 16, 40 bar
Temperature: -29 °C - 180 °C

The KTN 121LT is our 3-way, full bore, DIN flanged ball valve. The range comprises from DN 25 to DN 100, varying its floating valve design from DN 65 where the sphere is guided for better performance, ...

Seat valve with opening or closing by spring. USE Pressure circuits or vacuum lines as a safety valve rated at different pressures.

DN: 20 mm - 100 mm
Pressure: -1 bar - 10 bar
Temperature: -80 °C - 200 °C

... Aseptic Sampling Valve is designed to be installed in tanks and reactors. It can also be used for food preparation and pharmaceutical operations. This device ensures absolute drainability without dead leg. The VA-VFA ...

DN: 0.125, 0.25, 0.5, 0.75 in
Pressure: 0 psi - 125 psi
Temperature: -20 °F - 225 °F

Humphrey offers you a variety of air piloted valves within the unique construction of the classic Diaphragm-Poppet Series. Choose diaphragm-poppet valves for your difficult, critical applications when ...

DN: 40 mm - 300 mm
Pressure: 40 bar
Temperature: -40 °C - 170 °C

The Ramén Ball Sector Valve in material configuration 1 is a stainless steel, soft seated control valve with a carbon/graphite reinforced PTFE seat with Viton® (FKM) o-ring seals and ...

DN: 2 in - 20 in
Pressure: 250, 200 psi
Temperature: 121 °C

... Resilient-Seated Butterfly Valves feature an uninterrupted seat design, one-piece body, solid one-piece shaft and a high performance resilient seat. Sizes 2-20” (50-500mm) feature seat ...