Seat valves

DN: 0.25 in - 8 in
Pressure: 150 psi - 4,500 psi
Temperature: -254 °C - 1,038 °C

... replacement of the internal trim (ball, stem, cage, seats, seat retainer cartridge and wear bushings). Interchangeability of the upstream and downstream seats and wear bushings extends the life of the ...

DN: 0.6 mm
Temperature: -10 °C - 60 °C

... 5 mm- Valve - Very small footprint and size - Precise flow rates - Low power consumption - Large pressure range Technical Data Function: 2/2 NC Pneumatic connection: cartridge Electrical connection: pins Media type: hydrogen, ...

Pressure: 6 bar - 10 bar
Temperature: 121, 135, 130, 150 °C

... The valve body of the RIEGER aseptic valves is hermetically sealed from the environment, thus ensuring the perfect protection for your liquid product. The pocket-free design of the valve body and the ...

DN: 10 mm - 80 mm
Temperature: -10 °C - 250 °C

... Classification:Angle valve Click:24 Date:2019/07/01 Orifice DN15-50 Pressure 0.03-1.6MPa Connection size 1/2-2、Flange ...

DN: 25 mm - 150 mm
Pressure: 5 bar

... therefore provided leakage outlet of the valve without intermixing with the product being in the second pipe. In addition the mixproof valves type B and R are equipped with a balancer. The balancer prevents that the ...

... DESIGN Seat valve with disk sealing OPERATION • Single acting to close in flow direction. Opened by pilot pressure. We recommend the use of this operation mode only at gaseous media. The using of liquid media could causes ...

... Stainless Steel Waist Drum Angle Seat Valve Features: Compact and lightweight Large flow and low resistance long lasting... Interface: DN15--DN50 Body material: stainless steel 304 Pneumatic form: plastic ...

DN: 15 mm - 200 mm
Pressure: 40, 16, 10 bar
Temperature: -29 °C - 400 °C

... INTEC K200 - 2-piece Flanged Ball Valves INTEC 2x1: Seat ring system metal seated. High end ball valves for the chemical industry. Proven design with perfect technical functionality. The ball ...

DN: 50 mm - 600 mm

... Features and benefits ● Velan's proven pressure seal design. ● Low pressure drop compared to vertical globe valves. ● Excellent resistance to the effects of thermal cycling. ● Low torque stroking due to: 1) radial thrust bearings; ...

... The valve is actuated pneumatically by either the compressor unloader solenoid valve or other pneumatic source on a cycle or regular basis, i.e. Air Dryer actuating source or a locomotive microprocessor with independent ...

DN: 40 mm - 300 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 85 °C

... The valves in series 20.900/21.900 are soft seated gate valves, made of ductile iron, manufactured in accordance with severe product norms and relevant norms, and in conformity to EN ISO 9001; They are available in the ...

DN: 13 mm - 45 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 180 °C

... SERIES Angle seat valves - stainless steel In its single acting version, the valve is normally closed (or opened) by spring force. When the piston is moved by the force of the compressed air in ...

DN: 15 mm - 400 mm
Pressure: 16 bar - 640 bar
Temperature: -196 °C - 550 °C

... The 810D Series cage single- seat control valve adopts the top guided unbalanced structure, featured by high strength, heavy load, S type flow channel, low pressure drop loss, high flow coefficient, wide adjustable range, ...

Pressure: 0 bar - 17.5 bar

... Automatic Ball Drip Valve is used with ETW-D, NTW, ETD-D and NTD trims of all models of Deluge Valves. • Bronze Construction • Approvals: Part of UL Listed Deluge Valve Trim The Drip Valve ...

DN: 20 mm - 800 mm
Pressure: 2.5, 1, 1.6 MPa
Temperature: 80 °C

... Float Control Valve Shell test pressure: 1.5, 2.4, 3.75MPa Sealed test pressure : 1.1, 1.76, 2.75MPa Suitable medium: water, Sewage Materials: Serial No. - Part - Material 1 - Seat - Cast Iron (GG25, HT200) ...

DN: 12.7 mm - 203.2 mm

... end ball valve with an ISO 5211 compliant direct mount actuation pad. The 10E10 is available in sizes ranging from ½” to 8” with ASME Class 150 flanges. Valve bodies are made of either CF8M or WCB with 316SS trim and ...

DN: 10 mm - 80 mm
Flow rate: 4 m³/h - 127 m³/h

... Integrated pneumatic actuator NAMUR solenoid mounting pad Compact assembly Visual indicator High Cycle-Life Actuator rotates 360° ...

... 20mm Pressure: 250 MPa Life of valve core and valve seat: normally sixty thousand pcs ...

... Actuator to valve direct mount technology for simplified installation Options Electronic switch for remote open/close position option Stainless steel housing Replaceable Seat on needle valve ...

DN: 25 mm - 200 mm
Temperature: -200 °C - 600 °C

... Neles series X modular ball valve, incorporates robust stem to ball connection in seat supported models. Application based seat selection assures valves are capable of delivering long ...

DN: 25 mm - 150 mm
Pressure: 10 bar

... special tools Valve bodies made from solid bar Balanced valve members made from solid bar Auxiliary washing system (optional) Upper and lower lift control (optional) Serviceable actuator The B935 is a double seat ...

Pressure: 0 bar - 0 bar
Temperature: 250 °C - 450 °C

... Bakeable leak valves are used to control the flow of gas into a vacuum system from an external source. A soft metal pad is compressed against a harder metal seat, creating the necessary seal for precise gas flow control. Available ...

DN: 10 mm
Pressure: 350 bar

... The Water spray valves contains a 2/2-way valve cartridge . Connection DN10 ...

Pressure: 28 bar

... Non-rotating self aligning swivel seat disc with fully retained Teflon seat ring •Lower cost than flanged designs •Backseating stem to a I tow for replacing stem packing while under pressure •Protective painted finish • Valve ...

DN: 0.25 in - 1.5 in
Pressure: 10,000 psi
Temperature: 200 °F

... All stem threads are rolled for strength and ease of operation One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads Slotted spring pin to prevent accidental loosening Vinyl dust cap for ...