- Hydraulics - Pneumatics >
- Valve >
- Seat valve
Seat valves
DN: 600 mm - 1,200 mm
Pressure: 6, 10, 16 bar
Temperature: -30 °C - 130 °C
Wafer type butterfly valve for installation between flanges EN 1092-1, PN 6/10/16. One-piece body. Continuous valve stem, internally connected with the valve disc by dowel pins. The connection ...
GEFA Processtechnik
DN: 6 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 160 °C
... in contact with the fluid handled only: body and diaphragm ● Body designs: 2-way valve body, T-pattern, tank or multi-port valves ● Butt weld ends or clamped connection ● Drain angle indicated by ...
DN: 1.5 in - 6 in
Pressure: 5 bar
Temperature: 135, 140 °C
The next generation of mixproof valve technology is the result of continued development from both APV and Waukesha Cherry-Burrell process technologies. Used for the reliable separation of dissimilar fluids, the D4 Series ...
Waukesha Cherry-Burrell
DN: 38 mm - 152 mm
Pressure: 10, 6 bar
The W72RS Series Mix Proof Valve features a lower radial seal for minimal spillage of products when opening or closing. Specifications Materials Product Wetted: ASTM 316L (UNS-S31603); (DIN-1.4404) Non-Product: ...
Waukesha Cherry-Burrell
DN: 38 mm - 152 mm
Pressure: 7, 10.3, 10 bar
Mixproof valves provide safe separation of dissimilar products within the same valve body. Specifications For general purpose mixproof applications, we offer the W71 Series for standard shutoff service. Materials ...
Waukesha Cherry-Burrell
Pressure: 16 Pa
Temperature: -10 °C - 180 °C
... PP1020 Series Normally Closed ; PP1021 Series Normally Open Advantage of TORK Pneumatic Piston Valves ● Less pressure drop than the globe valves ● Short open-close time ● High flow rate ● Body ...
Pressure: 16 bar
Temperature: -10 °C - 180 °C
3/2 Way pneumatic piston valves . Connection : 1/2"-2"
Pressure: 10 bar - 500 bar
max. operating pressure 500 bar, min. operating pressure 10 bar. Type of actuation: manual Application: For single acting cylinders. CETOP 3 adaptation.
Pressure: 400 bar
Cylinder body made of steel, phosphatized. Remaining parts made of tempering steel. Valve seat and piston are hardened and ground. This valve is leak free. The stop valve ...
DN: 0.5 in - 2 in
Pressure: 0.8 bar - 10 bar
Temperature: -10 °C - 180 °C
Features of Double Acting Angle Seat Valve Can Be Easily Converted From Nc To No and From double Acting To Single Acting. Operator Having Threaded Ports Is Ideally Suited For Area In Which Contamination ...
DN: 0.5 in - 3 in
Pressure: 0 bar - 25 bar
Temperature: -10 °C - 180 °C
Pressure Range(Bar): Normally Close -Above P lug : 0-25 | Below plug : 0-25Normally Open : 0-25Universal - Above plug : 0-25 | Below plug : 0-16 Orifice Size (mm): 12 Port Connection: 1/2" MOC: CF8 (SS304 Cast) | CF3M (SS316L Cast) ...
DN: 10 mm - 50 mm
Pressure: 16 bar
Temperature: -40 °C - 140 °C
... Patented SEAT STOP® ball carrier system that lets you micro-adjust ball seats and minimise the axial force effect. • Easy radial dismounting allowing quick replacement of O-rings and ball seats ...
FIP - Formatura Iniezione Polimeri
DN: 10 mm - 50 mm
Pressure: 16 bar
Temperature: -40 °C - 140 °C
... Patented SEAT STOP® ball carrier system that lets you micro-adjust seals and minimise the axial force effect. • Easy radial dismounting allowing quick replacement of O-rings and ball seats without any ...
FIP - Formatura Iniezione Polimeri
DN: 10 mm - 50 mm
Pressure: 16 bar
Temperature: 0 °C - 100 °C
... Patented SEAT STOP® ball carrier system that lets you micro-adjust ball seats and minimise axial force effects • Easy radial dismounting allowing quick replacement of O-rings and ball seats ...
FIP - Formatura Iniezione Polimeri
DN: 6 mm
Pressure: 600, 420 bar
Temperature: -55 °C - 200 °C
... control styles, the valve can always be adapted to the system requirements Hardened, ground and lapped seat valve components ensure permanent leaktightness and long service life Optionally ...
DN: 40 mm - 700 mm
Pressure: 16, 10 bar
Temperature: -10 °C - 70 °C
INFINITY and its new wedge and stem technology ensures smooth functionality with outstanding low torque values. New guiding system for the wedge with male composite sliding skate in order to easily achieve the 2500 cycles enurance test ...
DN: 15 mm - 65 mm
Pressure: 0 bar - 10.2 bar
Temperature: 0 °C - 180 °C
... position feedback signal 0-10 V / 4-20 mA (after automatic balance) Control element 2-port/2-way valve, NC (normally closed) as standard, as option 3-port/2-way valve for mixing different media, with ...
Pressure: 0 bar - 40 bar
Temperature: 95 °C
Externally controlled valve for the hydrogen sector Valves for hydrogen and oxygen in electrolyser operation Pneumatically operated 2/2-way valve - Direct pressure control Designed ...
DN: 50 mm - 1,500 mm
Pressure: 16 bar - 420 bar
Temperature: -46 °C - 200 °C
Floating Ball Valve soft seated Athena cast steel ball valve - Mainly designed for low-pressure services with a flexible temperature range. - Provides a wide variety of this series of ball valves ...
Athena Engineering S.r.l.
DN: 50 mm - 600 mm
Pressure: 10 bar - 16 bar
Temperature: -29 °C - 80 °C
... Rising stem gate valves - Have the threads external to the valve body. The gate valve stem is moving up when the valve is opening. - In this way, you can visually ...
Athena Engineering S.r.l.
DN: 40 mm - 300 mm
Pressure: 16 bar - 100 bar
... diffluence) control valve has functions of dividing one-way flow into two-way flow or combining two-way flow into one-way flow. It has features of S-shape passageway、cage-guided、quick-disassemble seat ...
Athena Engineering S.r.l.
DN: 0.5 in - 2 in
Pressure: 3.5 bar - 7 bar
Temperature: -10 °C - 180 °C
Port Refer below technical data sheet (Available BSP / NPT) End Connection - Screwed / Flange / Tri-Clamp Body Material - SS ASTM A351 Grade CF8 / CF8M Seal - TEFLON / VITON / EPDM / SILICON Media Steam, Air, Water, Chemical, Gases, ...
DN: 0.5 in - 2.5 in
Pressure: 3.5 bar - 8 bar
Temperature: -10 °C - 180 °C
Angle Seat Valve with Plastic Operator (NC/NO/Double Acting) > Port: - Refer below technical data sheet (Available BSP / NPT) > End Connection: - Screwed / Flange / Tri-Clamp > Body Material: - SS ...
DN: 0.5 in - 2 in
Pressure: 3.5 bar - 8 bar
Temperature: -10 °C - 180 °C
... not essential. Multiple Function with the same operator - NC / NO / Bi-Directional. Flow direction below or above the seat. Media: Steam, Air, Water, Chemical, Gases, Oil, Diesel, Hot Water.
Pressure: 20 psi - 300 psi
DN: 15 mm - 50 mm
Pressure: 16 bar - 40 bar
Temperature: -10 °C - 180 °C
The 21IA4T15GC is a 2-way angle seat air operated valve that is capable of providing high flow rates. Its body has been constructed out of stainless steel and it features a corrosion resistant actuator ...
ODE
DN: 40 mm - 1,600 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C
... the request of customers . The gate valve body is made of cast steel and it is suitably dimensioned to assure a high safety factor. The thicknesses are always higher than the mini-mum ones established for GATE VALVE ...
Di Nicola Infinam Srl
DN: 100 mm - 3,000 mm
Pressure: 16, 10, 25 bar
Temperature: -40 °C - 200 °C
... be used as a safety valve (positive safety valve able to close even in case of tampering) In addition to the above mentioned technical advantages there is a remarkable economical benefit as this valve ...
Di Nicola Infinam Srl
DN: 25 mm - 1,200 mm
Pressure: 2.5 bar - 100 bar
Temperature: -45 °C - 200 °C
Di Nicola manufactures ball valves type floating and trunnion mounted alloy carbon steel ASTM 216 WCB / GP 240GH + N and stainless steel with high nickel content ranging in size and nominal pressures in accordance with ...
Di Nicola Infinam Srl
DN: 15 mm - 50 mm
Pressure: 6 bar - 10 bar
... To block and also regulate in industrial plants Fluids • Neutral media and aggressive liquid or gaseous media if the valve components that contact the media are resistant to the service temperature according to ...
Pressure: 6 bar - 10 bar
Temperature: 121, 135, 130, 150 °C
The valve body of the RIEGER aseptic valves is hermetically sealed from the environment, thus ensuring the perfect protection for your liquid product. The pocket-free design of the valve ...
Gebr. Rieger GmbH + Co. KG
Pressure: 6 bar - 10 bar
Temperature: 150, 130 °C
RIEGER hygienic single seat valves are used, when a maximum level of productivity, safety and quality is requested. They are found in plants of the dairy industry and the food industry. The advanced ...
Gebr. Rieger GmbH + Co. KG
Pressure: 6 bar - 10 bar
Temperature: 130, 150 °C
... food and dairy industry. The design of its one-piece valve body and the radial sealing of both valve seats along with the balanced valve disks enable a perfectly safe ...
Gebr. Rieger GmbH + Co. KG
DN: 300 mm - 3,000 mm
Pressure: 16 bar
Temperature: -25 °C - 300 °C
... soft seal (leakage rate A in acc. with EN 12266-1) Closing of the valve is dampened to reduce pressure surges in the pipeline Double seat – one valve instead of two separate valves ...
DN: 200 mm - 400 mm
Pressure: 1.2 bar
Temperature: 180 °C
QUICK-CLOSING VALVE IN DOUBLE SEAT DESIGN TYPE KVII/FD Being part of the proven KÜHME high-performance valve series for industrial applications, the KÜHME valve type ...
DN: 25 mm - 150 mm
Pressure: 10 bar
... special tools Valve bodies made from solid bar Balanced valve members made from solid bar Auxiliary washing system (optional) Upper and lower lift control (optional) Serviceable actuator The B935 ...
BARDIANI VALVOLE S.p.a.
DN: 0.75 in - 1.25 in
Pressure: 4.4 bar - 16 bar
... extensively, and could be used for high temperature liquid and strongly corrosion liquid, etc.; 3、The structure of valve is a 45° angle seat, the inner chamber is streamlined designed, the tunnel resistance ...
DN: 0.75, 0.5 in
Pressure: 6,000 psi
Temperature: 200 °F
... 6,000 psi pressure rating @ 200 °F Replaceable Delrin® seat and straight through porting for bidirectional, high capacity flow and easy roddable cleaning PCTFE or PEEK soft seat optional ...
NOSHOK
DN: 6 in - 84 in
... Transparent PVC stem cover for visual confirmation of valve status Seat lubrication ports as standard for easy assembly of lubrication kits Different materials for wetted areas for improved service ...
DN: 2 in - 36 in
M&J Valve Expanding Gate (EG) valves can be used in wide range of critical applications, from pipelines to power plants, in ESD and other demanding isolation applications. Description The M&J Valve ...
DN: 6 in - 84 in
... Transparent PVC stem cover for visual confirmation of valve status Seat lubrication ports as standard for easy assembly of lubrication kits Different materials for wetted areas for improved service ...
DN: 0.75 in - 3 in
Flow rate: 0 l/min - 300 l/min
... Bronze valves with seat connections. Packing & Gasket: Asbestos-Free B&G Flo-Control Valves are used for preventing gravity flow in forced water systems and to permit summer-winter ...
DN: 0.5 in - 8 in
... Habonim’s line of Flanged Full Port Ball Valves in ANSI Class 150 and ANSI Class 300. Ideal for conditions which require maximum pressure drop, reducing risk of clogging with solids or slurries. Habonim’s full bore valves ...
Temperature: -45 °C - 260 °C
KLINGER BALLOSTAR® KHI BALL VALVES Decades of reliability guaranteed KLINGER Ballostar® KHI ball valves will keep up with stricter requirements and are assured to already meet future standards with ...
KLINGER
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining