Pressure: 16 bar
Temperature: 150 °C
... affected by the solid substances, through which may hinder the flow, unlike butterfly valves. Therefore, it is a preferred valve type for impure fluids. Truevalve Knife Valve Body Material: AISI304 ...
Ekin Industrial
DN: 45 mm
Temperature: 180 °C
... Port size 2" BSP Female Thread (ISO 228/1) - Input. 2" BSP Female Thread (ISO 228/1) - Output. Pressure range Min. 0/Max. 150 Housing material Stainless Steel 316 Microcast (CF-8M). Piston - Stainless Steel 316. Spring - Steel (SAE 6150) - White Zinc ...
DN: 20, 25 mm
Pressure: 1.6 MPa
Temperature: 5 °C - 95 °C
... HTW-71-DV Series electric dynamic pressure balance valve is a dynamic equilibrium with the electric control integration products, mainly for air-conditioning equipment, HVAC system at the end (such as air box, new air handling units, ...
DN: 0.75 in - 5 in
Pressure: 10 MPa - 76 MPa
Temperature: -29 °C - 425 °C
... Product Features Good valve core stability. The sturdy and durable guide cylinder provides excellent valve core stability and can reduce vibration and mechanical noise. Greater flow capacity. The flow-type flow channel ...
DN: 10 mm - 100 mm
Pressure: 0 bar - 160 bar
Temperature: -20 °C - 220 °C
... Large Flux, low resistance, no water hammer. Y type shape enlarged the flowing section, which could raise the flux by %30 and make flow more smooth. Super long working life, which help the stem adjust and lubricate itself automatically. ...
DN: 10 mm - 65 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 180 °C
... Body material: stainless steel Pressure:0-16bar Orifice:10-65mm Pipe size:screw-type welded-type Fluid Media: Air etc Application industry Beer beverage, disinfection equipment, rubber machinery, textile printing and dyeing, pharmaceutical, medical ...
DN: 2 in - 20 in
Pressure: 250, 200 psi
Temperature: 121 °C
... Resilient-Seated Butterfly Valves feature an uninterrupted seat design, one-piece body, solid one-piece shaft and a high performance resilient seat. Sizes 2-20” (50-500mm) feature seat ...
DeZURIK
DN: 0.5 in - 2 in
Pressure: 16, 40 bar
Temperature: 0 °C - 187 °C
... Modulating valve with stainless steel or brass body. Angled seat pneumatic valve with electronic control of flow rate modulation. Electronic flow modulation with exclusive MAROS technology Parabolic ...
MAROS Engineering
DN: 40 mm - 700 mm
Pressure: 16, 10 bar
Temperature: -10 °C - 70 °C
... INFINITY and its new wedge and stem technology ensures smooth functionality with outstanding low torque values. New guiding system for the wedge with male composite sliding skate in order to easily achieve the 2500 cycles enurance test required by European ...
DN: 8 mm - 200 mm
Pressure: 100, 16 bar
Temperature: -50 °C - 280 °C
... from the valve body Gland in stainless steel (24) Wear compensation by the mean of a pair of spring washers (7) Built-in body seals to guarantee internal/external tightness. Seats profiles designed for upstream/ ...
Meca-Inox
DN: 32, 25, 20, 15, 40 mm
Pressure: 16 bar
Temperature: -20 °C - 130 °C
... 1. The combination valve integrates oil separation seat, oil filter seat, minimum pressure valve, and temperature control valve, with a compact structure; 2. The temperature ...
DN: 15 mm - 250 mm
Pressure: 10 bar - 160 bar
... 5211 ACTUATOR MOUNTING • Body: WCB/CF8/CF8M • Stem:20Cr13/17-4PH/SS304/SS316 Installable Accessories Solenoid Valve Limit Switch Air-Filter Regulator ...
ROPO GmbH
DN: 15 mm - 50 mm
Pressure: 10 bar
Temperature: 0 °C - 60 °C
... angle seat valve is a shutting-off and regulating valve particularly suitable for clean fluids. Technical features: Solvent welded metric sockets Can be installed in any position No metal ...
DN: 100 mm - 1,200 mm
Temperature: -100 °C - 550 °C
... for laminated seat is placed on the body which reducing the possibility of graphite gets wear further leads to leakage. The graphite is positioned in the notch of the sealing seat in order to allow for easy repair. We ...
Value Valves Co., Ltd.
Pressure: 0 bar - 16 bar
Flow rate: 40 l/h - 200 l/h
... temperature changes, liquefaction of chlorine gas. OPERATION PRINCIPLE Through the adjustable screw the valve cone can be lifted above the valve seat within defined limits, so that the operating ...
DN: 15 mm - 65 mm
Pressure: 2 bar - 16 bar
Temperature: -10 °C - 180 °C
... Repeatability: < 1.0% FS Failsafe: valve closes (NC) in the event of voltage failure, optionally outlet fail freeze feature Control_ valve_body: bronze, optionally SST 316L Cone_seal: PTFE Proportional_ valve_body: ...
DN: 10 mm - 300 mm
Pressure: 40 bar
Temperature: -271 °C - -30 °C
... desert or cold conditions) Essential product features: - Available as globe, control or check valve and filter with stem extension - Cryogenic valve suitable for medium temperatures ranging from -271° C to -30° C ...
STÖHR ARMATUREN GmbH & Co KG
... The Valve seat angle PP30480 has its various types. Those are PP3048020005 (20mm x 1/2"), PP3048025007 (25mm x 3/4"), PP3048032010 (32mm x 1"), PP3048040013 (40mm x 1 1/4"), PP3048050015 (50mm x 1 1/2") and PP3048063020 ...
DN: 300 mm - 3,000 mm
Pressure: 0 bar - 2.5 bar
Temperature: -25 °C - 300 °C
... soft seal (leakage rate A in acc. with EN 12266-1) Closing of the valve is dampened to reduce pressure surges in the pipeline Double seat – one valve instead of two separate valves ...
... Sleeved Plug Valve AFC Sleeved plug valves are non-lubricated quarter-turn valves that achieve sealing through the use of a compressible sleeve as a sealing member. In many applications they operate ...
HEFEI AFC INTERNATIONAL TRADE CO., LTD.
DN: 50 mm - 400 mm
Pressure: 150 psi
... KNIFE GATE VALVE rising stem Technical characteristics: stem: rising, SS420 body: cast iron EN-GJL-250 wedge: SS304 coating: blue epoxy powder RAL5015 EPDM seat, bronze nut Nominal pressure PN10 (1.0Mpa), PN8, ...
BLUCAST
DN: 25 cm - 100 cm
Pressure: 16, 40 bar
Temperature: -29 °C - 180 °C
... The KTN 121LT is our 3-way, full bore, DIN flanged ball valve. The range comprises from DN 25 to DN 100, varying its floating valve design from DN 65 where the sphere is guided for better performance, suitable for conducting ...
KTN
DN: 0.25, 0.5, 0.375 in
Pressure: 150 psi
Temperature: 70 °F
... The Hayward NVA Series Needle Valves are available in PVC and GF-PP, and they have FPM )-rings and a PTFE seat. The end connections are threaded only, and all valves are constructed with silicone free ...
DN: 15 mm - 300 mm
Pressure: 16 bar - 100 bar
... Stem multi-stage sealing, valve seat elastic sealing design Safe and reliable Valve stem blowout prevention, fireproof, explosion-proof, anti-static and other functions design The torque is light ...
DN: 15 mm - 300 mm
Pressure: 16 bar - 40 bar
Temperature: -40 °C - 100 °C
... Two-way control valves with one- seat design A. Hock Series 2000 valves are our two-way control valve all-rounders. Available in both standard and more complex versions, the valves ...
the best suppliers