Schubert & Salzer steam valves

DN: 15 mm - 200 mm
Pressure: 16 bar - 40 bar
Temperature: -40 °C - 100 °C

Two-way control valves with one-seat design A. Hock Series 2000 valves are our two-way control valve all-rounders. Available in both standard and more complex versions, the valves ...

DN: 450 mm

Electric actuated triple eccentric hard (metal) seal butterfly valve / perfect seal Features Hard seal valve  - Triple eccentric and low torque design  - Stem design: Available in square shaft ...

... temp is -20℃~+180℃, ambient temp is -20℃~+60℃. The valve body material is stainless steel, with a PTFE sealing material and a PA actuator cover. The applicable medium is air, liquid and steam under ...

DN: 10 mm - 100 mm
Pressure: 0 bar - 160 bar
Temperature: -20 °C - 220 °C

Large Flux, low resistance, no water hammer. Y type shape enlarged the flowing section, which could raise the flux by %30 and make flow more smooth. Super long working life, which help the stem adjust and lubricate itself automatically. ...

DN: 8 mm - 100 mm
Pressure: 63 bar
Temperature: -60 °C - 280 °C

... body threaded ball valves are available in sizes from DN8 to DN100 with BSP threaded end connections. Face to Face Dimensions are according to DIN3202-M3 and PN63 working pressure. Ideally suited to be used as a manual ...

DN: 0.25 in - 8 in
Pressure: 150 psi - 4,500 psi
Temperature: -254 °C - 1,038 °C

The HI-100® Control Valve features an in-line Straight-thru, venturi flow design. The control element, a spherical ball, is contained by a cage that positions the ball relative to the downstream seat by means of linear ...

... - cles, viscous media, drain water, sludge, food etc (plastic granulates, sand or similar media on request) Not suitable for steam BODY • GG-25 (grey cast iron), epoxy coated (heat- treatment 190*C. 20min) • stainless ...

DN: 0.5 in - 2 in

... Actuator: Manual Seal Surface: Wedge Gate Valve Thread Position of Valve Rod: Inside Gate Valve Standard: DIN Application: Industrial Usage, Water Industrial Usage Product Name: ...

DN: 0.5, 0.75, 1 in
Pressure: 16 bar
Temperature: -10 °C - 165 °C

This self closing globe valve features a solid bronze body and lever, with gland and FPM O-rings. This valve is well-suited to work for non-toxic, and non-inflammable liquids, gases, and steam. ...

DN: 0.25 in - 2 in

... BSP-Parallel FlowFull ConnectionsFxF ApplicationIndustry Stem configurationPacking Gland HandleLever BodyBrass ProductBall Valve Size 1/4" - 2'

... to our competition. BIOFLO® II diaphragm valves are compact, forged, and lightweight valves designed to meet the stringent requirements within high purity systems. Applications include sampling, drain ...

DN: 1 in - 2 in

... Mark D & DA Series are single port, screwed-in metal-seated valves with unbalanced post-guided valve plugs, and push-down-to-close plug action used for high pressure applications. These valves ...

DN: 15 mm - 100 mm
Temperature: -20 °C - 300 °C

... Model NO.: Q41F Connection Form: Flange Nominal Pressure: 150lb to 2500lb Structure: Floating Ball Valve Function: Blow-Down Valve Application: Industrial Usage, Water Industrial Usage Class: ...

Pressure: 0 bar - 64 bar
Temperature: -20 °C - 180 °C

Stainless steel ball valves - 110 series Technical features - stainless steel AISI 316 body - stainless steel AISI 304 handle - O-ring and ball sealings in PTFE - maximum working pressure : 64 bar (40°C) - working ...

DN: 15 mm - 400 mm
Pressure: 16 bar - 640 bar
Temperature: -196 °C - 550 °C

The 810D Series cage single-seat control valve adopts the top guided unbalanced structure, featured by high strength, heavy load, S type flow channel, low pressure drop loss, high flow coefficient, wide adjustable range, ...

Pressure: 6, 10 bar
Temperature: 0 °C - 240 °C

... pressure tight chamber valve is flanged directly at the reactor inlet. - Continuous entry in a pneumatic conveying system in combination with the solids blow through rotary valve, that is fixed directly ...

DN: 15, 20, 25 mm
Pressure: 42 bar
Temperature: 426 °C

Complete SS construction, AISI 304, (Suitable for blowing out dirt from strainer element)

DN: 0.125 in - 1 in
Pressure: 400 bar
Temperature: 0 °C - 240 °C

PCI NNV4, NRPV, NGSV needle valve has high pressure line shut off feature. They feature instrument isolation, gauge isolation and drain valve. They can provide liquid and vapor service. All three ...

DN: 15 mm - 300 mm
Pressure: 16 bar
Temperature: -10 °C - 300 °C

Angle globe valve in PN16 with stainless steel trim.

DN: 32 mm - 1,000 mm
Pressure: 20 bar
Temperature: -35 °C - 110 °C

The VTB200 series Butterfly valve is different because of its price and quality. The Butterfly valves can be used for many different applications and media. The body is made from cast iron with an ...

Wafer Segment Ball Valve Segment Ball Valve (Wafer Segment Ball Valve) is a throttling control segmented ball valve that provides high flow capacity with optimum characteristics ...

DN: 0.25 in - 2 in
Pressure: 10 bar - 28 bar

Product Information Material: Bronze Seat: RTFE Thread: female NPT x female NPT

DN: 50 mm - 500 mm
Temperature: -29 °C - 150 °C

The KTN 431 is an updated version of the globe valve with cast CF8M stainless steel body and classes available in 150/300/600/1500, ANSI flanges. Thanks to the presence of molybdenum [Mo] in the alloy, we have dramatically ...

DN: 2 in - 88 in
Pressure: 10 bar - 160 bar
Temperature: 815 °C

... the series TRI-CON to an allrounder for many different industrial applications. Zwick valves are used for industrial and exhaust gases, liquids, hot water or steam at lowest as well at high temperature ...

... 1.4571/316Ti), stellit, polyimid Pressure range: up to PN63 (note table of dimensions) Field of application: thermo oil, steam, exhaust gas, bitumen (Coating seals and body materials adapted to application!) Temperature ...