DN: 40 mm - 300 mm
Pressure: 16 bar
Temperature: 300 °C
... industrial cold and hot water plants heat engineering industrial technologies refrigeration and air conditioning steam plants ...
DN: 15 mm - 300 mm
Pressure: 1.6, 2.5, 4 MPa
Temperature: -29 °C - 180 °C
... The ball valve is mainly used to cut off or connect the medium in the pipeline, and can also be used for the regulation and control of the fluid. The hard-sealed V-shaped ball valve has a strong connection between the ...
ChinaTanggong Valve Co., Ltd.
DN: 15 mm - 50 mm
Pressure: 0 bar - 13 bar
Temperature: -10 °C - 180 °C
... Water Treatment Sterilizers Water Purification Filtration Systems Water Management Neutral and Corrosive Fluids Hot Water and Steam ...
Pressure: 17, 20 bar
Temperature: 210, 220 °C
... The GD-30 and GD-30S are compact, high-performance direct-acting valves. Economical to buy and use, it is ideal for those low- to moderate-flow applications where accuracy of +/- 10% is acceptable. The GD-30 and GD-30S are well suited ...
Armstrong International, Inc.
DN: 0.75 in
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 145 °C
... proportional motorised valve 3/4" inch made of stainless steel to control the flow in the system up to 6000 l/h with an setpoint of 0 - 10 volt FKM/FPM seal: - FKM/FPM setpoint: - 0 - 10 volt voltage: - 24V DC (+/- 10%) actuating ...
DN: 15 mm - 200 mm
... Ability: - 10000PCS/Mouth Silent Stainless Steel Swing Check Valve API 6D/ ANSI 16.5 B/ JIS 20K/JIS 10K /DIN Stainless Steel Swing Check Valve Application: The Check valve is used ...
Zhejiang Jieyu Valve Company
DN: 0.5 in - 2 in
Pressure: 16, 12.8 bar
Temperature: 120 °C - 200 °C
DN: 50 mm - 400 mm
... globe valve is a type of adopts a straight-through valve body and controls the medium flow by the disc moving up or down. This straight through stop valve is widely used for control of water, steam, ...
DN: 450 mm
... Electric actuated triple eccentric hard (metal) seal butterfly valve / perfect seal Features Hard seal valve - Triple eccentric and low torque design - Stem design: Available in square shaft for easy mounting ...
... temp is -20℃~+180℃, ambient temp is -20℃~+60℃. The valve body material is stainless steel, with a PTFE sealing material and a PA actuator cover. The applicable medium is air, liquid and steam under a controlling ...
Zhejiang Kangsaite Valve Co., Ltd.
DN: 8 mm - 100 mm
Pressure: 63 bar
Temperature: -60 °C - 280 °C
... body threaded ball valves are available in sizes from DN8 to DN100 with BSP threaded end connections. Face to Face Dimensions are according to DIN3202-M3 and PN63 working pressure. Ideally suited to be used as a manual isolation valve ...
Doruk Endustri Ltd.
DN: 0.25 in - 8 in
Pressure: 150 psi - 4,500 psi
Temperature: -254 °C - 1,038 °C
... The HI-100® Control Valve features an in-line Straight-thru, venturi flow design. The control element, a spherical ball, is contained by a cage that positions the ball relative to the downstream seat by means of linear stem travel. There ...
Pressure: 6 bar - 10 bar
Temperature: 150, 130, 135, 121 °C
... process lines is achieved via the CIP/SIP capable leakage chamber of the RIEGER-double seat valve N7 (also called double chamber valve. The CIP/SIP valves control the steam inlet and ...
... - cles, viscous media, drain water, sludge, food etc (plastic granulates, sand or similar media on request) Not suitable for steam BODY • GG-25 (grey cast iron), epoxy coated (heat- treatment 190*C. 20min) • stainless steel 1.4408 SEALING ■ ...
DN: 0.5 in - 2 in
... Info Model No.: H152 Actuator: Manual Structure: Through Way Globe Valve Stem Thread Position: Inside Screw Stem Globe Valve Standard: JIS, ANSI, DIN Product Name: Bronze Globe Valve With Steel ...
DN: 15 mm - 50 mm
Pressure: 40, 16 bar
Temperature: -10 °C - 400 °C
... KLINGER KVN DN15-50 Piston valves, flange design. Features DN 15 - DN 50 piston valve valve rings KX-GT piston made of special niro-steel FTF dimensions acc. to EN 558, GR.1 flanges acc. to ...
KLINGER-SCHÖNEBERG GmbH
DN: 0.5, 0.75, 1 in
Pressure: 16 bar
Temperature: -10 °C - 165 °C
... This self closing globe valve features a solid bronze body and lever, with gland and FPM O-rings. This valve is well-suited to work for non-toxic, and non-inflammable liquids, gases, and steam. It ...
DN: 50 mm - 400 mm
Pressure: 16 bar - 40 bar
Temperature: 280 °C
... balanced straight-way valve for medium and very high flow rates | useable for liquids, gases and steam | body made of GGG-40 or GS-C 25 | high precision thanks to integral control behaviour | response time can be adjusted ...
MANKENBERG GmbH
DN: 0.25 in - 2 in
... BSP-Parallel FlowFull ConnectionsFxF ApplicationIndustry Stem configurationPacking Gland HandleLever BodyBrass ProductBall Valve Size 1/4" - 2' ...
... to our competition. BIOFLO® II diaphragm valves are compact, forged, and lightweight valves designed to meet the stringent requirements within high purity systems. Applications include sampling, drain ports, steam ...
DN: 1 in - 2 in
... Mark D & DA Series are single port, screwed-in metal-seated valves with unbalanced post-guided valve plugs, and push-down-to-close plug action used for high pressure applications. These valves are used ...
JORDAN VALVE
DN: 15 mm - 100 mm
Temperature: -20 °C - 300 °C
... Model NO.: Q41F Connection Form: Flange Nominal Pressure: 150lb to 2500lb Structure: Floating Ball Valve Function: Blow-Down Valve Application: Industrial Usage, Water Industrial Usage Class: 150lb to 2500lb Application ...
Pressure: 0 bar - 64 bar
Temperature: -20 °C - 180 °C
... Stainless steel ball valves - 110 series Technical features - stainless steel AISI 316 body - stainless steel AISI 304 handle - O-ring and ball sealings in PTFE - maximum working pressure : 64 bar (40°C) - working temperature ...
SENGA
DN: 15 mm - 400 mm
Pressure: 16 bar - 640 bar
Temperature: -196 °C - 550 °C
... The 810D Series cage single-seat control valve adopts the top guided unbalanced structure, featured by high strength, heavy load, S type flow channel, low pressure drop loss, high flow coefficient, wide adjustable range, high flow characteristic ...
SuZhou KoSa Environmental Protection CO.,LTD
Pressure: 6, 10 bar
Temperature: 0 °C - 240 °C
... pressure tight chamber valve is flanged directly at the reactor inlet. - Continuous entry in a pneumatic conveying system in combination with the solids blow through rotary valve, that is fixed directly below the chamber ...
the best suppliers