DN: 15, 20, 25 mm
Pressure: 42 bar
Temperature: 426 °C
Complete SS construction, AISI 304, (Suitable for blowing out dirt from strainer element)
Pennant Engineering
DN: 0.5 in - 2.5 in
Pressure: 16 bar - 40 bar
Temperature: -40 °C - 250 °C
... Self-actuated flanged or threaded EN or ASA Pressure reducing valve, suitable for steam, gases and liquids for reduce pressure in lines, available in different materials and pressure ranges. ...
EFSVALVES
... Circulation control valve Tasks Circulation control valves regulate the flow rate during drum circulation on forced-flow steam generators. Versions Forged valves in straight, angled ...
Welland & Tuxhorn AG
DN: 0.125 in - 1 in
Pressure: 400 bar
Temperature: 0 °C - 240 °C
... PCI NNV4, NRPV, NGSV needle valve has high pressure line shut off feature. They feature instrument isolation, gauge isolation and drain valve. They can provide liquid and vapor service. All three valves ...
PCI INSTRUMENTS LTD
DN: 15 mm - 300 mm
Pressure: 16 bar
Temperature: -10 °C - 300 °C
... Angle globe valve in PN16 with stainless steel trim. ...
Dansk Ventil Center A/S
DN: 0.25 in - 1.5 in
Pressure: 10,000 psi
Temperature: 200 °F
... All stem threads are rolled for strength and ease of operation One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads Slotted spring pin to prevent accidental loosening Vinyl dust cap for ...
NOSHOK
DN: 32 mm - 1,000 mm
Pressure: 20 bar
Temperature: -35 °C - 110 °C
... The VTB200 series Butterfly valve is different because of its price and quality. The Butterfly valves can be used for many different applications and media. The body is made from cast iron with an epoxy coating, the ...
DN: 10 mm - 80 mm
Pressure: 40 bar - 100 bar
Temperature: -20 °C - 150 °C
... -OFF valve for: chemical products, for water and pneumatic installations, gas, water, vacuum. For steam applications, working pressures may be reduced and special seals required. For special applications please check ...
EFFEBI
DN: 0.5 in - 6 in
Pressure: 15 psi - 50 psi
Temperature: -20 °F - 250 °F
... Clark Globe Valves 1/2"through 2"are bronze body, NPT screw sort, and are appraised for ANSI Class 250 working pressures. The working temperature ranges from 20° to 250°f. The valve stems are stainless steel and valve ...
DN: 0.25 in - 2 in
Pressure: 2,000 psi
Temperature: -50 °F - 500 °F
... Threaded, Steam Rated 250PSI WSP/2000PSI) Valtorc's series 120 ball valve is available in threaded end connections and is ideal for any steam service environment. With 250PSI WSP and up to 2000PSI ...
DN: 25 mm - 500 mm
Pressure: 1.6 bar - 10 bar
Temperature: -46 °C - 650 °C
... R2 series valve, V-shaped notch has a similar equal percentage characteristics, suitable for the regulating or shut off service of slurry, fiber or the fluids easy to crystallization. The actuator for R1 series valve ...
DN: 0.5 in - 2 in
Pressure: 209 bar - 690 bar
Temperature: -54 °C - 538 °C
... mounting of bonnets not wetted to avoid seizure and leaks Smooth valve actuation, even under high pressure, leads to fault-free operation and long service life Metal valve seat with leak-tested tightness in ...
Our animal feed solutions help you produce top quality feed and to make economical use of your raw materials and energy. As a technology partner with long-lasting experience in the industry, we support you in every aspect of the production of reliable ...
DN: 150 mm - 2,500 mm
Pressure: 5 bar
Temperature: 1,000 °C
DN: 15 mm - 50 mm
Pressure: 700,000 Pa - 1,600,000 Pa
Temperature: -5 °C - 185 °C
... temperature -5...+185°C • Pressure class PN16 • Differential pressure 0.8...1.6 MPa 3-way control valves MTRS is a range of 3-way control valves intended for use in heating and ventilation systems. They ...
the best suppliers