The Pneumatic Flange Ball Valve is a a single-acting/double-acting valve composed of cast steel, WCB, and stainless steel. The actuator cover is made of aluminum alloy, and it has nominal ...
DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: -40 °C - 180 °C
Flapcon® BA302 Series 3-piece ball valves are manufactured from cast&ductile iron, steel and stainless steel casting varieties. Thanks to full-bore construction, they provide high capacity permeability. Due to different ...
DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: 0 °C - 60 °C
EFFAST PVC-U valve BK1 is a true union ball valve ideal for heavy duty applications, chemical applications and water treatment. Technical features: Solvent welded sockets (ISO, BS, ASTM, JIS), threaded ...
Effast
DN: 0.375 in - 3 in
Pressure: 3 bar - 16 bar
Temperature: -20 °C - 180 °C
... angle seat valves offer an excelent flow control with low pressure loss. Valves can be installed in any position preferably with actuator face up. Actuators can be ...
DN: 0.5, 0.75, 1 in
Pressure: 1,000,000 Pa
Temperature: -15 °C - 50 °C
The T20-S2-B Tonhe Motorized Ball Valve, from China, is used for water control. It is suitable for water heater, water meters and water treatment. It is made of NPT/BSP 3/4 Stainless Steel Valve with ...
DN: 50 mm - 300 mm
Pressure: 10 bar - 16 bar
BELGICAST Float Valve Angle or straight body float valve balanced thanks to a piston, actuated by a PVC float. The construction and design have been optimized to provide a simple ...
Pressure: 0 bar - 12 bar
Temperature: -20 °C - 70 °C
The T3218 series of pneumatic limit valves is mainly used on industrial vehicles. TECHNICAL CHARACTERISTICS Medium: filtered and lubricated compressed air Working pressure: 0 ÷ 12 bar Working temperature: - 20° ...
DN: 100, 200, 250 mm
Pressure: 0 mbar
Category - Gate valve, manual, ISO, stainless steel Actuation - manual via hand crank Item description - Long life, bellow sealed gate valve for high vacuum (HV) mounting flanges DN100 ISO-F according ...
DN: 15 mm - 100 mm
Pressure: 6 bar - 16 bar
Temperature: 0 °C - 120 °C
... international standard. The main types of plastic valves are ball valves, butterfly valves, check valves, diaphragm valves, gate valves ...
DN: 15 mm - 300 mm
Pressure: 150, 300 psi
... of MNC 3 & 4 Way Ball Valve. This Ball Valve is available in sizes that range from 15 MM to 300 MM. Sturdy constructions, long service life, fine finishing are some of the main factors of our 3 & 4 Way ...
Marck And Care Engineers Ltd.
Pressure: 7 bar
... µL to 100 µL. A versatile valve The valve can be operated using pressure up to 7 bar (100 psi), and the wetted material is PEEK, a highly chemically and biocompatible material. Fluigent software for ...
DN: 15 mm - 200 mm
Pressure: 16, 25, 40, 64 bar
Temperature: -196 °C - 450 °C
Electric Actuated Globe Control Valve Body: Cast Steel, Cast Iron, Ductile Iron, SS304, SS316, SS316L Bonnet: Cast Steel, Cast Iron, Ductile Iron, SS304, SS316, SS316L Lining ...
Valvesonly Europe
DN: 10 mm - 80 mm
Flow rate: 4 m³/h - 127 m³/h
Integrated pneumatic actuator NAMUR solenoid mounting pad Compact assembly Visual indicator High Cycle-Life Actuator rotates 360°
DN: 2.54 mm - 8.74 mm
Pressure: 276 bar - 1,379 bar
Normally Open, Normally Closed, Air Pilot Actuated.These valves open or close high pressure oil or plain water back to tank or to another line or high pressure gas to another line. High pressure section alloys are stainless ...
Hydraulics International
Pressure: 0 Torr - 760 Torr
... pressure control applications in conjunction with mass flow controllers. These valves utilize a micrometer-set third position from which the valve can be remotely actuated to some degree ...
DN: 50 mm - 1,000 mm
Knife gate valve, uni-directional. Available as metallic sealing or with other kinds of seals. Stainless steel spade. Available with actuator. Suitable for powder media. Connections for cleaning nozzles available.
Dansk Ventil Center A/S
DN: 8 mm - 80 mm
Pressure: 16, 25, 40, 64 bar
AISI 316 2-PCS BALL VALVE WITH DIRECT ISO PAD AND DIN SHAFT 2 way full bore Stainless Steel ball valve ATEX II2 G/D CT3 - PN64 - Body, ball and stem in AISI 316 - TFM1600 seats - FKM o-ring - Threaded ...
TUNING Fluid Solutions SARL
DN: 125, 200, 150 mm
Pressure: 25, 16, 40 bar
Temperature: 0 °C - 400 °C
DESCRIPTION • 2-way and 3-way control valve with flanged connection PN16-25-40 • Body Nodular cast iron GGG40/3 or AISI316 • Seats in stainless steel on or in the body • Stem seals PTFE- PTFE+ FPM- graphite Self-adjusting • ...
DN: 80 mm - 600 mm
Pressure: 10 bar - 40 bar
... using this design, the former two valve system with a spool piece becomes obsolete. This fact is not only important for installation since you have to install only one valve body in the pipeline, but ...
Vent valves control pressure in tanks or water treatment equipment caused by temperature or volume changes respectively. Actuated by a weight and lever mechanism, the vent opens immediately upon reaching ...
DN: 40 mm - 300 mm
Pressure: 6, 16, 10 bar
Temperature: -20 °C - 130 °C
... • Reduction gear with manual operation also for small DN. ON REQUEST: • Kit to convert from a manual valve to an actuated valve. • For further special requests please ...
EFFEBI
DN: 15 mm - 200 mm
Pressure: 100 bar
Temperature: -40 °C - 170 °C
Engelsberg ball valve KUL 7201 Combination – Buttweld/Socket weld – Threaded – Reduced Bore Reliable and durable ball valves for tight shut off in liquid and gas applications. Special design avoiding ...
DN: 0.5 in - 4 in
Pressure: 1,000 psi
Temperature: -50 °F - 475 °F
... sales team to actuate your valve package - save time and money with Valtorc International. The series 140 ball valve is the valve used in our most popular 3 piece ball valve ...
Valtorc
Temperature: -20 °C - 60 °C
A versatile, packaged actuator controlled Butterfly Valve. It features the Eclipse BV paired with the Kromschroeder IC actuators as well as offers options for other Honeywell actuators. The ...
DN: 2 mm - 17.5 mm
Pressure: 1,400 bar
Temperature: 10 °C - 80 °C
... aforesaid valves allow not only to fill, but also to carry out the delivery under pressure with nominal diameters being double compared with the valves that are normally on the market for the pressure ...
Please specify:
Help us improve:
remaining