- Electricity - Electronics >
- Cable, Connector, Enclosure >
- Data connector >
- SCHURTER
SCHURTER data connectors
Data rate: 12 b/s
... connectable terminating resistors. For improved EMC compatibility, the housing of the plug is metalized. Using the PROFIBUS connector diagnosis, a PROFIBUS network can be established in which the user can at any time ...
Helmholz GmbH & Co. KG
Data rate: 12 b/s
... PROFIBUS connector 90° is equipped with a proven and reliable screw terminal. It is quickly mounted and has integrated, connectable terminating resistors. For improved EMC compatibility, the housing of the plug is metalized. The ...
Helmholz GmbH & Co. KG
Data rate: 12 GB/s
PROFIBUS connector - proven and worldwide in use. It is quickly mounted and has integrated, connectable terminating resistors. For improved EMC compatibility, the housing of the plug is metalized. The PROFIBUS connector ...
Helmholz GmbH & Co. KG
THERMAL DETECTION's mini thermocouple connectors can be used for almost all conventional calibration processes. The male in-line connectors have flat pins of differing widths to prevent incorrect ...
Thermal Detections range of standard thermocouple plugs & sockets are available for type T, K, J, B, N and R. Colour coded to either ANSI or IEC colour standards. Suitable in standard format up to 220°C, high temperature ...
Primary current: 10 A
Voltage: 250 V
Operating temperature: -40 °C - 60 °C
HAWKE Ex-connector InstrumEx's design allows the live mating and de-mating of signal and low power in hazardous areas safely and quickly. It is suitable for Ethernet applications and it can be installed into Ex d enclosures ...
Teaflex S.p.a
Primary current: 9 A
Voltage: 300 V
Pitch: 7.62 mm
Number of poles: 2, Spring tightening, 9A, 1.5mm², 14AWG, 300V, Pitch 7,62 mm, Flanges, Wiring mode Right, Green (RAL 6032), Soldering technology Not applicable, UL, CUL, IEC Stripping length11.5 mm Operating temperature range-40°C ...
SAURO
Primary current: 9 A
Voltage: 300 V
Pitch: 3.5 mm
Number of poles: 2, Spring tightening, 9A, 1.5mm², 14AWG, 300V, Pitch 3,5 mm, Flanges, Wiring mode Right, Green (RAL 6032), Soldering technology Not applicable, UL, CUL, IEC Number of poles: 2 Number of levels: 1 Sides configuration: ...
SAURO
Primary current: 9 A
Voltage: 300 V
Pitch: 7 mm
Number of poles: 2, Spring tightening, 9A, 1.5mm², 14AWG, 300V, Pitch 7 mm, Flanges, Wiring mode Right, Green (RAL 6032), Soldering technology Not applicable, UL, CUL, IEC Number of poles: 2 Number of levels: 1 Sides configuration: ...
SAURO
Magnetic Cable Assemblies and Connectors Magnetic assemblies are a popular and quickly growing cable assembly choice. Adam Tech has incorporated 30 years of connector knowledge and experience to develop ...
ADAM tech
Adam Tech Spring Loaded Connectors consist of a pin, barrel, and steel spring with or without an insulator carrier. They are used in many industries across a wide range of applications to make a secure, high reliability ...
ADAM tech
Adam Tech FAKRA Connectors (Fachkreis Automobil, a German standard) are SMB based automotive-grade connectors that can operate up to 6 GHz. These connectors are embedded within a special ...
ADAM tech
Operating temperature: -70 °C - 260 °C
DJB Part Number: 4P-1 Description: ¼-28UNF 4 pin plug for use with single connector triaxial accelerometer extension cables. Manufactured by DJB these connectors provide a high quality and rugged ...
DJB Instruments UK Ltd
Operating temperature: -70 °C - 260 °C
DJB Part Number: 4S-1 Description: ¼-28UNF 4 pin socket for use with single connector triaxial accelerometers. Manufactured by DJB these connectors provide a high quality and rugged connection solution. Coupling ...
DJB Instruments UK Ltd
Operating temperature: -70 °C - 400 °C
... , HL25, HL30) for high temperature applications. Using glass and Macor to seal the connector pins into the body provides high temperature resistance. This connector is manufactured by DJB Instruments ...
DJB Instruments UK Ltd
Connectors for Wiring Photovoltaic Panels General features ✔ Contact material: silvered copper ✔ Box material: Polycarbonate / Polyamide ✔ Contact diameter: 4 mm ✔ Acceptable wire sizes: 4 to 6 mm² ✔ Cable insulation ...
MECATRACTION
The range of connectors offers a convenient solution to most of installation requirements without the need for prior preparation of the green/yellow conductor. A simple powered screwdriver is the only tool required. The ...
MECATRACTION
Connectors for Equipotential Bonding performs the equipotential bond by creating a high-quality electrical contact between the panel chassis and the earth conductor. The module frames are made from aluminium which ...
MECATRACTION
Primary current: 0.5 A
Voltage: 30 V
Pitch: 0.8 mm
Designs are based on the industry standard SFP Multi-Source Agreement (MSA).The SFP board mount connector is 20 position and 0.8mm pitch.High Speed Contact Design.High temp and IR reflow compatible versions are available. ...
Nextronics Engineering Corp.
Operating temperature: -55 °C - 85 °C
Compliant with MSA standard. Press-fit contact is compliant with IEC60352 Fix strong crocodile's snap style to keep the entrance integrity avoid distortion in shape. Cage assembly:Copper Alloy with Nickel Plating Light pipe:PC, ...
Nextronics Engineering Corp.
Impedance: 70 Ohm
Voltage: 300 V
Compliant with MSA standard. Press-fit contact is compliant with IEC 60352. Patent protected multi-piece composite structure. Cage:Copper Alloy with Nickel Plating Kick-out Spring:Stainless Steel Contact:Copper Alloy with Au ...
Nextronics Engineering Corp.
Primary current: 5.1, 1.7, 5.5 A
Pitch: 0.8 mm
Data rate: 16 Gb/s
Performance Level IEC 60512-9-1:2010 - 1 No. of Contacts - 12 Board-to-Board Distance - 6.0 mm to 13.5 mm Insulator Material - LCP, UL 94 V-0 CTI value IEC 60112 - 150 Contact Material - Copper alloy Plating - Au over Ni Termination ...
ept
... also called pogo connectors or simply short travel probes due to their compactness and their short travel. Pogo Connectors They are particularly suitable as charging contacts and as interfaces for ...
... wires so much. By using our connectors you can be sure to have a very well and optimized contact resistance. Caused by the technical characteristics of the insulating material and the flexibility of the braids the ...
... a number of connector kits to enable the construction of custom cabling. Kits are available for virtually all of OMS past and current products. Features: - Connector kit compatible with the PC48 family ...
... available or needed, OMS supplies a number of connector kits to enable the construction of custom cabling. Kits are available for virtually all of OMS past and current products. Features: The CON68 Connector ...
Through connectors 0.25 - 6 mm² Data: Cu 99.95%, tin plated. Insulation sleeves are halogen free, no EasyEntry
Elpress
Through connectors with heat shrink insulation 0.5 - 6 mm² Data: Cu 99.95%, tin plated, heat shrink sleeve with melting glue inside
Elpress
Parallel connectors 0.5 - 6 mm² Data: Cu 99.95%, tin plated. Insulation sleeves are halogen free.
Elpress
... wear-free contacting connectors for in-circuit and functional tests. They have been specially developed for very numerous inspections as found frequently in the most different industries in the production process. ENGMATEC ...
... configuration, e.g. first side Mxx-connector - second side individually confectioned (e.g. cable gland mounted or cable support sleeve moulded, common crimp connectors confectioned) -Our family of ...
... Cables with overmoulded connectors -Individually attuned to your requirements -Customer-specific overall configuration of the cable assembly -Adjustable to your design requests -Plastic-moulded ...
As a partner (not distributing company) of enterprises in medical technology we have fully adapted to the very special requirements of this industry. In close cooperation with our customers we develop system solutions - fast and target-oriented. ...
PROCON housings are made from die cast aluminium, die cast zinc and glass fibre-reinforced polyamide. A seawater-resistant special aluminium die cast alloy is used for the BHT series. The aluminium housing is given a high-quality powder ...
Primary current: 30 A
Voltage: 10,000 V - 40,000 V
The high-voltage circular connector from the S series is manufactured by GES. It has an IP50 class protection, with a round or 4-hole flange mount. The connector operates with a voltage range of 10 up ...
GES Electronic & Service GmbH
Primary current: 3 A
Voltage: 33 V - 70 V
Female BNC Jack (socket) w/ Solder Terminal. Ideal for panel mounting, round nut fixing.
Ground strap adapter kit for SX series DIN connectors PolyPhaser DIN Ground Strap Kit Specifications for GSA-KIT-D Mount Type strap Ground Type copper
Primary current: 1.5 A - 16 A
Voltage: 277, 60 V
Circular connectors that combine an easy to use 30 degree locking mechanism with proven environmental sealing up to IP68 and IP69K. Available with rugged metal or plastic housings, they are ideal for applications where ...
Bulgin Components
Primary current: 1.5, 0.35 A
Voltage: 30, 42 V
... reliable sealed RJ45 connectors that provide high performance Cat5e Ethernet connections in harsh environments. Our sealed industrial Ethernet solutions help to provide high speed data connections and ...
Bulgin Components
Primary current: 1 A
Voltage: 30 V
Pitch: 2.54 mm
... circular connectors in the industry today. IP67, IP68 and IP69K rated, these sealed USB connectors have been designed into a wide range of markets such as Industrial and Marine, setting the gold standard ...
Bulgin Components
With the hermaphroditic MicroStac connectors, the plug and mating plug are identical. The connectors are available in single-row and double-row variants. They offer economical solutions for connectors ...
ERNI Electronics
Voltage: 1,500, 1,000 V
Operating temperature: -40 °C - 70 °C
Category 6 RJ45 connector, EA class with locking hook Made up of only 2 elements Extremely simple assembly: connection without special tools Die-cast zinc housing suitable for industrial applications Cat6 connector, ...
19” 3U horizontal resorber - For optical cross-connect Reversible resorber (cord input on right or left) Lifting capacity of up to 288 x 2 mm cords Optimal resorption and adjustment of cords, using cylinders and demi-cylinders Depth ...
Operating temperature: -40 °C - 70 °C
... damage All BR Connectors Supplied pre-terminated Our unique 4 start ACME thread offers a smooth and quick fully mating action in less than two turns for fast and simple installation Easy to install and inspect Profiled ...
Hawke International U.K
Operating temperature: -40 °C - 100 °C
Protection class - IP68 Temperature range - -40 °C - 100 °C Material - Gland polyamide UL94-V0, Gasket TPU
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining