- Robotics - Automation - Industrial IT >
- Automation >
- Compact I/O >
- SIGMATEK
SIGMATEK compact I/O
... -P is a mixed digital module with dual 10/100 Mbps Ethernet ports. It is designed for flexible wiring needs, small installation space, high I/O density applications with built-in Ethernet networking. ...
Cost-optimized CANopen-slave-I/O module for the extension of the inputs/outputs of a master control unit via CAN. The communication of the master control unit takes place via CANopen or a layer 2 protocol. The ESX.iox fulfils the safety ...
The ESX.3ios is a CAN-I/O module for the extension of the inputs/outputs of a master control unit via CAN. The communication with the master control unit takes place via CANopen, CANopen Safety, the STW protocol ECeS ...
... completely isolated from the CANbus. P317 modules may be mixed on the same bus, with other types in the Trio CAN I/O range. The Trio CANbus I/O expansion can considerably reduce machine wirin
Trio Motion Technology
... thermocouple, and resistance temperature detector (RTDs) modules. All modules are compact in size and will work with Modbus as well as other available protocols. The IOS serial Remote I/O ...
... thermocouple, and resistance temperature detector (RTDs) modules. All modules are compact in size and will work with Modbus as well as other available protocols. The IOS serial Remote I/O ...
... or 24V -40°C … +80°C 24 Pin Connector High output current capability (4x10A + 1x15A) Output protection with automotive mini blade fuse Reduces EMI and length of high current cables by locating near to load Relays ...
... 12 or 24 VDC -40°C … +80°C 24 Pin Connector High output current capability (8 x 5A) Output protection with automotive mini blade fuse Reduces EMI and length of high current cables by locating near to load Relays ...
... EMI and length of high current cables by locating near to load Controlled bt Active High or Active Low inputs Low cost compact and versatile switch module
NXI-5100 series high density programmable resistance card programmable Rresistor module NXI-5100 supports LAN bus control. Its optional range of resistance is 0Ω~11.11MΩ. Resistance accuracy can be up to 0.1%. For different applications, ...
... Series features both standar RS-485 Modbus RTU, Ethernet Modbus TCP and Wi-Fi connectivity options. The multi-channel and compact design of modules (17.5mm width) maximizes the space use and the push-in terminal design ...
... Series features both standar RS-485 Modbus RTU, Ethernet Modbus TCP and Wi-Fi connectivity options. The multi-channel and compact design of modules (17.5mm width) maximizes the space use and the push-in terminal design ...
... Series features both standar RS-485 Modbus RTU, Ethernet Modbus TCP and Wi-Fi connectivity options. The multi-channel and compact design of modules (17.5mm width) maximizes the space use and the push-in terminal design ...
... remote I/O system, it linked a local area network designed to connect controllers to remote I/O chassis and replacement of discrete wirings by fieldbus or industrial Ethernet communication. MIOS supports ...
... in the web interface and the numerous digital and analog I/Os. Two Ethernet Ports with a Daisy Chain function are available for the connection to the LAN network and the chain further Ethernet I/O devices. ...
Depending on the configuration, the EWIO2-W-BM is a compact Modbus and/or BACnet/IP network. With a Modbus or BACnet Client, various tasks can be realised in building and industrial automation. Simple functions and control ...
... As an IIoT I/O module, ATOP’s IO5202 Series is a compact solution for connecting digital and analog devices and sensors, enabling you to monitor, acquire and process data from remote ...
... includes special modules : the mirror , the chronology TES, the communication centralizer. MECHANICAL INSTALLATION -Compact monoblock : Dimensions : W x H x D = 130 x 134 x 64 mm -Aluminium -Mounting ...
The analog input module MV210-101 has 8 analog inputs which can be connected to various types of RTDs, thermocouples, position encoders, and standard signals. To communicate the input data to a controller, an Ethernet port and Modbus ...
akYtec GmbH
The digital input module MV210 has 20 or 32 digital inputs able to connect switch contacts as well as NPN or PNP transistors. To communicate the input data to a controller, an Ethernet port and Modbus TCP are at your disposal. The module ...
akYtec GmbH
The digital input module MV210 has 20 or 32 digital inputs able to connect switch contacts as well as NPN or PNP transistors. To communicate the input data to a controller, an Ethernet port and Modbus TCP are at your disposal. The module ...
akYtec GmbH
The xtremeDB -1 (pronounced: "dash one") CANopen module combines many different I/O signal configurations. It offers a total of eight inputs, up to four of which can be parameterized in analog mode. Two of the digital ...
This input module from the xtremeDB series offers 16 freely configurable input signals and a SAE J1939 connection. Eight inputs can be used as analog inputs for current or voltage measurement or as ratiometric inputs. Eight further inputs ...
The RIO40S remote I/O module, based on a CANopen architecture, ensures fast and reliable communication. Ultra compact, it can be easily integrated into any type of cabinet or electrical cabinet. Thanks ...
SERAD
... power surges whilst reducing electrical noise in measured signals. Providing the very best specifications on the market in compact package, these 8B30 millivoltage signal conditioners isolate, filter and amplify a millivoltage ...
Dataforth Corporation
... power surges whilst reducing electrical noise in measured signals. Providing the very best specifications on the market in compact package, these 8B31 voltage signal conditioners isolate, filter and amplify a voltage ...
Dataforth Corporation
... power surges whilst reducing electrical noise in measured signals. Providing the very best specifications on the market in compact package, these 8B32 current input signal conditioner isolate, filter and amplify a current ...
Dataforth Corporation
Stand-alone, compact CAN slave module 16 / 32 / 64 input channels, of which 16 / 32 / 32 free can be configured as output (DIO) Digital outputs each with 1 A continuous current Supply voltage: 18 to 34 ...
BACHMANN
We offer a comprehensive range of fieldbus components for common industrial fieldbus systems including compact IP 67 I/O modules (LioN-Series). High protection classes are considered self-evident; so ...
... as the indication of OK and reset is shown via LEDs on the front panel. Compact and Cost Saving All I/O functions are located on one board and provided via one rugged I/O ...
... module and up to 10 I/O modules in a compact mechanical enclosure - Distributed topology In this topology the Controller is integrated by the central system expanded with up to 16 Remote I/Os ...
Panel I/O – Processor and Multifunction I/O Board with 16 A/D, 2 D/A, 20 DIO, One I2C and One RS-232/422/485 Port Features Compact board level size (4.5" x 8.5" x 0.75") ...
The SPiiPlus IOMnt-32-32 (Network Inputs and Outputs Module) is an EtherCAT digital I/O module with 32 inputs and 32 outputs. The input voltage is 24Vdc
EtherCAT ® Digital I/O Modules Powerful Digital and Analog I/O Modules for EtherCAT® Network Up to 32 Inputs and 32 Outputs Compact and cost effective Easy to use The ...
... independent IO-Link port 8 channels of IO-Link port (Class A) allow parameters to be set independently, and IO-Link mode and SIO mode can be set per port. In addition, digital input ...
CONTEC
... -known manufacturers directly in the automation system. Up to 24 digital outputs – for up to 24 valves – are located in a compact housing. For all pneumatic valves These valves also use the 25-pin multi-pin socket ...
6 digital inputs (+24 V DC/3.5 mA) Input delay: 1 µs 8 digital short circuit proof outputs (+24 V DC/0.5 A/backreadable) 1 analog input (±10 V DC/16 bits) 1 analog current input (0-20 mA resp. 4-20 mA/16 bits) For the S-DIAS system, ...
SIGMATEK GmbH & Co KG
... independent of the controllers and I/Os used. The MultiFieldbus is therefore also the solution if an application is to be set up with different controllers (fieldbuses) and the I/O system is to continue ...
Siemens Safety Integrated
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining