SKF Linear & Actuation Technology electric actuators

Force: 5 N - 80 N

... Non-Captive linear actuator with nut inside motor. Linear moving part can rotate so it should be fixed. • External linear actuator. Nut are mounted on lead screw. • Captive (will be available for ...

Rod diameter: 5 mm
Force: 30 N - 340 N

... Non-Captive linear actuator with nut inside motor. Linear moving part can rotate so it should be fixed. • External linear actuator. Nut are mounted on lead screw. • Captive (will be available for ...

Rod diameter: 16 mm
Force: 400 N - 2,700 N

... Non-Captive linear actuator with nut inside motor. Linear moving part can rotate so it should be fixed. • External linear actuator. Nut are mounted on lead screw. • Captive (will be available for ...

Stroke : 14 mm - 271 mm
Force: 6 N - 92 N
Speed: 5.6 m/s

THE ST SERIES IS NOTABLE FOR: » Tubular linear motor » 3 phase technology » Actuator, components and module » High power density » High efficiency » Highly dynamic acceleration » Very long life-time » Freedom ...

Stroke : 27 mm - 309 mm
Force: 51 N - 780 N
Speed: 5.9 m/s

The ServoTube Actuator is an optimal solution for industrial position control. Faster than a ballscrew with the clean reliability of a linear forcer. ServoTube is a cost-effective alternative to air cylinders in applications ...

Stroke : 33 mm - 318 mm
Force: 137 N - 1,860 N
Speed: 5.3 m/s

THE ST SERIES IS NOTABLE FOR: » Tubular linear motor » 3 phase technology » Actuator, components and module » High power density » High efficiency » Highly dynamic acceleration » Very long life-time » Freedom ...

Stroke : 50 mm - 500 mm
Force: 0.5 kgf - 3 kgf
Speed: 80 mm/s

... customized Stroke, Precision, Speed and Load Capacity. They are widely used for Medical Equipment, Automation Products Line, Electronic Industry and etc. As an Industrial Factory, we also accept OEM. Once you provide ...

Stroke : 50 mm - 1,200 mm
Force: 20 kgf - 40 kgf
Speed: 60 mm/s - 220 mm/s

... What machine do you use the stage on? 2.How long stroke do need the linear be? 3.How is the load and speed need? 4.Do need motor and accessory together? If need OEM or other special requirement, please tell us.

Stroke : 50 mm - 1,200 mm
Force: 20 kgf - 40 kgf
Speed: 60 mm/s - 220 mm/s

... What machine do you use the stage on? 2.How long stroke do need the linear be? 3.How is the load and speed need? 4.Do need motor and accessory together? If need OEM or other special requirement, please tell us.

Force: 100, 200 N

Description High performance brushless motor RS232 service interface for easy setup Real absolute multiturn encoder Technical details Output/Interface Profibus, Profinet, Powerlink, Modbus, Ethernet-IP, EtherCat, CANopen

RD12A rotary actuator with integral motor brake Job buttons Service interface Available with Profibus, Profinet, Powerlink, Modbus, Ethernet-IP, EtherCa or CANopen interface

... controller & encoder Closed loop position control Absolute multiturn encoder Boot loader via CAN RD53: Version with integral motor brake

Force: 3,400, 22,600, 14,400 N
Torque: 898.35, 428.4, 67.15 Nm
Speed: 3 m/s

Minimize the volume in your design with our lifgo® SVZ! • Helical Gearing • Super Silent • Tight Operating Parameters • High Quietness • Highest Precision • Simple Installation Application Example: lifgo® with helical gearing ...

... Whenever possible, the load weight on the Roh’Lix linear actuator should be supported by a separate linear bearing assembly. Learn More about the Roh’Lix Linear Actuator Roh’Lix linear actuators ...

Stroke : 35 mm - 3,754 mm
Force: 420 N - 1,000 N
Torque: 0.1 Nm

Spindle, toothed belt or direct drives with metal strip cover The linear actuators with metal strip cover are an extension of the standard programme. The metal strip offers protection against incoming dirt or particles ...

Stroke : 297 mm - 537 mm

rotaryARM The swivel arm module rotaryARM in connection with linear units is a very fast pick-&-place system for all tasks that require quick and precise automation solutions. It has a range of 297, 399 or 537 mm.

Stroke : 15 mm - 1,000 mm
Force: 10,000 N
Speed: 156 mm/s

The LD1000C linear actuator is ideal for the digitalization and control of vehicles, machines and building sections. It is extraordinarily robust and strong: The thrust force is up to 10,000 N and the stroke length reaches ...

Stroke : 15 mm - 1,000 mm
Force: 10,000 N
Speed: 130 mm/s

... and resistant linear actuator The LD1000E has a robust housing made of die-cast aluminium with a stable casing made of anodized aluminium profile and a lift pipe made of stainless steel. Inside, there ...

Stroke : 305 mm
Force: 67 N
Torque: 1.7 Nm

... is customized through a variety of leadscrew resolutions, available free-wheeling and anti-backlash nut selections, stepper motor configuration options, and optical encoder line counts. - Compact co-axial design enables ...

Stroke : 9 mm - 200 mm
Force: 2 N - 45 N

The Size 8 by Haydon Kerk Motion Solutions is a 21mm stepper motor linear actuator. Size 8, 21000 series linear actuators are available in three designs - captive, non-captive and external ...

Stroke : 12.7 mm - 250 mm
Force: 15 N - 90 N

The Size 11 by Haydon Kerk Motion Solutions is a 28mm stepper motor linear actuator. Size 11, 28000 series linear actuators are available in three designs - captive, non-captive and ...

Stroke : 25, 35, 50 mm
Force: 140 N
Speed: 0.01, 0.01 m/s

... sector in general where robustness and high reliability over time is required even in harsh environments. This type of linear actuator differs from many others in its particular robustness, which is suitable for overcoming ...

Stroke : 44, 29 mm
Force: 140 N
Speed: 0.01 m/s

This new and highly reliable one-of-a-kind piston is equipped with potentiometric linear feedback that allows its stroke to be controlled in both directions and in a variety of ways: – Proportional movement – Scheduled ...

Force: 300 N
Speed: 0.04, 0.07 m/s
Ambient temperature: -5 °C - 60 °C

... sector in general where robustness and high reliability over time is required even in harsh environments. This type of linear actuator differs from many others in its particular robustness, which is suitable for overcoming ...

Stroke : 100 mm - 200 mm
Force: 300 N - 600 N

L4.202 Linear actuators RA 60 K L4.202 Linear actuators RA 60 K max. lifting force 300 to 600 N stroke from 100 to 200 mm version with limit switches or stroke measuring system max. ...

Stroke : 100 mm - 600 mm
Force: 1,000 N - 6,000 N
Speed: 0.01 m/s - 0.04 m/s

max. lifting force 1000 to 6000 N stroke from 100 to 600 mm version with limit switches or stroke measuring system

Stroke : 12, 24 mm

... by specified software. It shall be used together with controller and controller power supply. Note: The motor of this product is exposed, the temperature of the motor increases during ...

Translation-rotation unit Adjustable speed Simple and accurate positioning Compact Simple installation Light

Stroke : 40 mm
Force: 295 N

... Ultrasonic cutting offers real benefits in the form of speed and minimal dust generation. Not only that, but the ultrasonic actuator used for cutting is a durable piece of equipment that requires no maintenance. Compressed ...

Stroke : 8 mm
Force: 0 N - 242 N

The special converter SPC35 are suitable for special applications of various kinds. Suitable for automated welding operations with short cycles Ideally suitable as a replacement for composite horns Constant spring pressure Heavy ...

Stroke : 100 mm
Force: 745 N

The special actuator SV35-100/50 is suitable for welding operations of thermoplastic parts from small to large size als well as for punching textiles. Configurable with RDG, SDG, AGM and ADG generators as well as with ...

Stroke : 10, 20 mm
Force: 8, 10 N
Torque: 1.5 Nm

... increase your component output and lower your unit costs, ► Saving energy with pulse control You only have to supply current briefly when retracting and extending the plunger. No energy is required at the end positions ► ...

Stroke : 25 mm
Force: 150 N
Speed: 600 mm/min

DL15 Series Linear Actuators Family: DL15 Series Linear Actuators Model: DL15-25-SV Price: $ 540.00

Stroke : 75 mm
Force: 150 N
Speed: 600 mm/min

DL15 Series Linear Actuators Family: DL15 Series Linear Actuators Model: DL15-DW-75-SV-PH Price: $ 938.00

Stroke : 75 mm
Force: 150 N
Speed: 600 mm/min

DL15 Series Linear Actuators Family: DL15 Series Linear Actuators Model: DL15-75-ST-C-PX Price: $ 752.00

Stroke : 10 mm - 800 mm
Rod diameter: 16 mm
Force: 1.36, 2.03, 1,380 kN

... Linear Actuator/Electric Cylinder For Industrial Machinery: Its maximum rated speed reaches 250mm/s, effective stroke 10-800mm. You can choose Inline type or Parallel type for different usage with ...

Stroke : 0 mm - 3,000 mm
Force: 2,000 N
Motor power: 130, 60 W

Linear Actuator is an electrically driven device(Precision Linear Actuator Cylinder) that converts the rotational motion of an electric motor into linear reciprocating ...

Stroke : 0 mm - 3,000 mm
Force: 90 N - 2,000 N
Motor power: 14, 21 W

Linear Actuator is also called Electric Cylinder(Precision Linear Actuator Cylinder),mainly consists of a driving motor, reduction gear, screw, nut, guide sleeve, rod, sliding seat, spring, ...