Staubli hydraulic fittings

Diameter: 0.13 in - 4 in
Operating pressure: 10 bar

GF-140C Conical seal with parallel BSP thread to DIN EN 10226

Diameter: 4 mm - 38 mm
Operating pressure: 100 bar - 400 bar

Diameter: 4 mm - 38 mm
Operating pressure: 100 bar - 400 bar

Operating pressure: 0 bar - 8 bar

It’s a Safety accessory in according with Directives ATEX 2014/34/EU and PED 2014/68/UE. The dry Break coupling is used to prevent any possible leaking during the process of transferring hazardous fluids in different fields of application ...

Diameter: 3, 4 in
Operating pressure: 8 bar - 230 bar

VAPOR RECOVERY ADAPTOR WITH IN LINE DEFLAGRATION FLAME ARRESTER It's a Protection System with ribbon coil: deflagration in-line flame arrester in according with Directive 20H/34/EU and harmonized standard EN ISO 16852:2016 - Used for ...

Diameter: 2, 3 in
Operating pressure: 0 bar - 8 bar

It's a Safety accessory in according with Directives ATEX 2014/34/EU and PED 2014/68/UE. The dry quick coupling is used to prevent any possible leaking during the process of transferring hazardous fluids in différent fields of application ...

Diameter: 4 mm - 16 mm
Operating pressure: -0.1 MPa - 1 MPa

... . Various sizes of unequal union type makes it possible to handle with just one fitting, although two or more fittings are used before. It reduces the amount of fitting used and enables ...

Diameter: 4 mm - 16 mm
Operating pressure: -0.1 MPa - 1 MPa

Newly introducing Lock-claws type Push-in fitting made of SUS316. High reliability and outstanding operability. The Lock-claws method similar to the Tube Fitting Standard Series is adopted. Excellent ...

Diameter: 4 mm - 16 mm

Compression fitting made of SUS316, which is highly resistant to corrosion. Best suitable for not only chemical industries but industries such as medical care, semiconductor manufacturing, solar battery and secondary ...

... a tube. Solid Hex Plugs Solid Hex Plugs are also for customers that take standard fitting and weld or thread non standard sizes on one end or make a custom fitting while embedding an RTD or thermocouple ...

... a tube. Solid Hex Plugs Solid Hex Plugs are also for customers that take standard fitting and weld or thread non standard sizes on one end or make a custom fitting while embedding an RTD or thermocouple ...

Compression fittings are used for connecting metal tubes useful for high and low temperature applications ad compatibility with aggressive fluids these can be seen in systems varying from gas lines in refineries , to ...

Manufacturing Process CNC Machining & Injection Molding Polyetheretherketone (PEEK) is a high-performance, engineering thermoplastic characterized by an unusual combination of properties. These properties range from high temperature ...

Operating pressure: 25, 80, 200, 250, 390 bar

... are available in 1/2”, 3/4” and 1” and many thread types, so they can connect any combination of threads and pipes . The fittings are suitable for low and high pressure work. Compatible with plastic garden connector.

NITO Fitting - NITO stainless steel fluid quick couplings are suitable for food contact and are used in the pharmaceutical, food, cosmetic and chemical industries. Stainless steel fittings are available ...

NITO high pressure quick coupling Optimal solution for high pressure cleaners and fixed installations. NITO high pressure fittings are manufactured from materials with an exceptionally strong and secure locking mechanism ...

A fluid connector is a connector that transmits fluids. It is a connector for connecting or disconnecting the fluid pipeline, which is suitable for various fluid connection occasions. such as Automotive, Plastics, IT-Broadcasting, Railway, ...

Diameter: 2, 2.5, 3, 4 in
Operating pressure: 40 bar

Swivel joint – direct-flangeswivel Product characteristics steel (42CrMo4) or stainless steel (1.4571) PTFE-Compound-seal built-in ball guiding tracks similar to ball bearings swiveling, rotating movements with ...

Diameter: 2 in - 32 in
Operating pressure: 40 bar

Swivel joint – direct-flangeswivel, Product characteristics steel (42CrMo4) or stainless steel (1.4571) PTFE-Compound-seal built-in ball guiding tracks similar to ball bearings swiveling, rotating movements with ...

Diameter: 0.25 in - 2 in
Operating pressure: 350, 100 psi

Swivel joint – heavy version with thread connections, nominal diameters G1/4″ – G2″ Product characteristics steel (42CrMo4) or stainless steel (1.4571) PTFE-Compound-seal built-in ball guiding tracks similar to ball ...

Diameter: 20, 25 mm
Operating pressure: 70 bar

Diameter: 20, 25 mm
Operating pressure: 70 bar

Diameter: 20, 25 mm
Operating pressure: 70 bar

Operating pressure: 80 bar

Diameter: 3 mm

Diameter: 1 mm - 8 mm

Diameter: 1.5 mm - 8 mm

Diameter: 10 mm - 54.5 mm

Connectors FLEXAquick for ROHRflex corrugated plastic tubings Plastic connector, quick-type, straight, plug-type connection, conically sealed Material PA plastics Temperature -40°C ... +120°C Protection class [acc. to EN 60529]: IP 66

Diameter: 10 mm - 56 mm

Metal connector, safety-type straight, outer thread metric or PG incl. ferrule [brass/plastic], sealing [TPE] or brass thrust collar and O-ring [NBR] Material: nickel-plated brass Temperature range: -40°C ... +125°C -40°C ... ...

Diameter: 10 mm - 56 mm

Metal connector, safety-type straight, metric outer thread, strain relief, incl. ferrule, sealing made of TPE or brass thrust collar [MSD] and O-ring Material: nickel-plated brass Temperature range: -40°C ... +100°C Prot. rate ...

Diameter: 0.125 in - 1 in
Operating pressure: 60 bar

Standard fittings Type 100 – Brass fittings – High resilience – Nickel-plating for corrosion protection Operating temperature max. +150°C Dependent on the temperature range of the tube/pipe ...

Diameter: 0.125 in - 1 in
Operating pressure: 60 bar

Standard fittings Type 100 – Brass fittings – High resilience – Nickel-plating for corrosion protection Operating temperature max. +150°C Dependent on the temperature range of the tube/pipe ...

Diameter: 0.125 in - 1 in
Operating pressure: 0 bar - 60 bar

Standard fittings Type 100 – Brass fittings – High resilience – Nickel-plating for corrosion protection Operating temperature max. +150°C Dependent on the temperature range of the tube/pipe ...

Diameter: 0.25 in - 2 in
Operating pressure: 10 bar

Port Refer below technical data sheet (Available BSP) Media Air, Water, Oil, Gas Upto 10 bar Temperature 85" C (Chilled water & high température available on request) RPM 1000 RPM High-Perfomance Bearings & Seals Dual Connection Available

Diameter: 2 mm - 8 mm
Operating pressure: 630, 500, 320 bar

With Oleotec hoses and fittings, pressure can be checked while hydraulic systems are at full pressure. Micro-fittings and micro-bore hoses can bear a working pressure of max. 630 bar. ...

Diameter: 50 mm - 200 mm
Operating pressure: 16 bar

Fittings with integrated anchoring socket for PE 80/ PE 100 pipes. Features Quick: Time saving up to 70%. No abrasion of the oxide film. No time for welding and cooling. Economical: no welding unit. ...

Diameter: 50 mm - 400 mm
Operating pressure: 16, 10 bar

Double socket bend Features As standard equipped with seal Typ 3S and -protecting caps GSK quality controlled and certified in accordance with RAL-GZ 662

Diameter: 80 mm - 200 mm
Operating pressure: 16 bar

GPE-i for connection to the VRS®-T sockets Features All materials with drinking water approval Easy assembling due to low axial force at VRST connection PE 100 for welding, push-fit or clamp-connection

Diameter: 3 mm - 15 mm

The Plastic Y Barbed Coupling, manufactured by Burkle, is ideal for applications such as pharmaceuticals, laboratory, industrial or manufacturing, water sampling and food processing. This provides a leak free and flow control fluid handling ...

Diameter: 1.6 mm - 11.5 mm
Operating pressure: 0 bar - 7,000 bar

MCS® High-Pressure fittings were conceived due to the need of offering an extremely reliable product to the high pressure industry. They are made with cold worked AISI 316L and are available in NPT versions up to 1035 ...

Diameter: 3.2 mm - 17.5 mm
Operating pressure: 0 bar - 1,400 bar

MCS® High-Pressure fittings were conceived due to the need of offering an extremely reliable product to the high pressure industry. They are made with cold worked AISI 316L and are available in NPT versions up to 1035 ...

Diameter: 3 mm - 20 mm
Operating pressure: 1,050 bar

MCS® High-Pressure fittings were conceived due to the need of offering an extremely reliable product to the high pressure industry. They are made with cold worked AISI 316L and are available in NPT versions up to 1035 ...

Diameter: 15 mm - 54 mm

9280G - NiroSan Male adaptor NiroSan Adaptor, with male plain end and male thread

Diameter: 6 mm - 108 mm
Operating pressure: 25, 16, 10, 45 bar

... solder and transition fittings for copper pipes according to EN 1057 and EN 13348 for hard and soft soldering. All products are certified according to many national and international certification bodies. SANHA capillary ...

Diameter: 15 mm - 108 mm
Operating pressure: 16 bar

Description NiroSan SF Tee, female ends 19130 - NiroSan SF Tee

Diameter: 40 mm - 225 mm

... assurance system in accordance with DIN EN ISO 9001. For all fittings a certificate in accordance with DIN EN 10204 must be submitted by the manufacturer. Depending on the dimension, the fitting must ...

Diameter: 80 mm - 400 mm

... quality assurance system in accordance with DIN EN ISO 9001. For all fittings a certificate in accordance with DIN EN 10204 must be submitted by the manufacturer. The body of the fitting including ...

Diameter: 40 mm - 225 mm
Operating pressure: 10 bar

... increased through directly available reducers at the branch, which also makes the fitting compact and light. Branches at other angles are available upon request. The fittings to be offered must be ...