- Hydraulics - Pneumatics >
- Pipe, Tube and Fitting >
- Straight fitting >
- Staubli
Staubli straight fittings
Diameter: 4 mm - 12 mm
Operating pressure: 0 bar - 10 bar
Diameter: 4 mm - 10 mm
Operating pressure: 80 bar
Diameter: 3 mm
Temperature Technology Ltd
Diameter: 1 mm - 8 mm
Temperature Technology Ltd
Diameter: 1.5 mm - 8 mm
Temperature Technology Ltd
Diameter: 10 mm - 54.5 mm
Connectors FLEXAquick for ROHRflex corrugated plastic tubings Plastic connector, quick-type, straight, plug-type connection, conically sealed Material PA plastics Temperature -40°C ... +120°C Protection class ...
flexa
Diameter: 10 mm - 56 mm
Metal connector, safety-type straight, outer thread metric or PG incl. ferrule [brass/plastic], sealing [TPE] or brass thrust collar and O-ring [NBR] Material: nickel-plated brass Temperature range: -40°C ... +125°C -40°C ...
flexa
Diameter: 10 mm - 56 mm
Metal connector, safety-type straight, metric outer thread, strain relief, incl. ferrule, sealing made of TPE or brass thrust collar [MSD] and O-ring Material: nickel-plated brass Temperature range: -40°C ... +100°C Prot. ...
flexa
Diameter: 3 mm - 14 mm
Operating pressure: 16 bar
... structure – Hexagon socket for easy assembly Operating temperature : -20°C bis +70°C -20°C bis +80°C For fittings with PVC seal For fittings with NBR O-rings Vacuum : max 98% Materials ...
ITV
Diameter: 4 mm - 14 mm
Operating pressure: 16 bar
... structure – Hexagon socket for easy assembly Operating temperature -20°C bis +70°C -20°C bis +80°C For fittings with PVC seal For fittings with NBR O-rings Vacuum max 98% Materials NBR ...
ITV
Diameter: 4 mm - 14 mm
Operating pressure: 16 bar
... structure – Hexagon socket for easy assembly Operating temperature -20°C bis +70°C -20°C bis +80°C For fittings with PVC seal For fittings with NBR O-rings Vacuum max 98% Materials NBR ...
ITV
Straight Conduit Fitting with Locknut and Sealing Washer, Fixed External Male Thread, Nominal Conduit Size 34mm, M32x1.5 Thread, Polyamide (Nylon) 66, With Locknut and Sealing Washer, Black A/LOK FOR ...
Diameter: 12 mm - 60 mm
New Type Quick Connector for Flexible Pipes - Product details Thread: Metric, PG, G(PF), NPT Materials: UL approved Nylon PA66 (Flammability UL94V-2) Wording temperature:-40℃-100℃ in ...
Diameter: 0.25 in - 2 in
Operating pressure: 10 bar
Port Refer below technical data sheet (Available BSP) Media Air, Water, Oil, Gas Upto 10 bar Temperature 85" C (Chilled water & high température available on request) RPM 1000 RPM High-Perfomance Bearings & Seals Dual Connection Available
UFLOW AUTOMATION
Diameter: 4 mm - 16 mm
Compact & Captivating Design Air tight sealing of tubes Durable & Maintenance free Pneumatic cylinders (ail types) Pneumatic control & circuit panels Ail Threaded nipples has plastic portion that is capable of rotating 360° Compatible ...
UFLOW AUTOMATION
Diameter: 4 mm - 16 mm
Compact & Captivating Design Air tight sealing of tubes Durable & Maintenance free Pneumatic cylinders (ail types) Pneumatic control & circuit panels Ail Threaded nipples has plastic portion that is capable of rotating 360° Compatible ...
UFLOW AUTOMATION
Diameter: 2 mm - 8 mm
Operating pressure: 630, 500, 320 bar
With Oleotec hoses and fittings, pressure can be checked while hydraulic systems are at full pressure. Micro-fittings and micro-bore hoses can bear a working pressure of max. 630 bar. All fittings ...
Diameter: 15, 20, 25, 32 mm
... original fittings. Fittings are made of high quality CW617N brass. The distinctive feature of the fittings is their custom design developed by SST and allowing the part to be fitted ...
Stahlmann
Diameter: 50 mm - 200 mm
Operating pressure: 16 bar
Fittings with integrated anchoring socket for PE 80/ PE 100 pipes. Features Quick: Time saving up to 70%. No abrasion of the oxide film. No time for welding and cooling. Economical: no welding unit. ...
Frischhut
Diameter: 80 mm - 200 mm
Operating pressure: 16 bar
GPE-i for connection to the VRS®-T sockets Features All materials with drinking water approval Easy assembling due to low axial force at VRST connection PE 100 for welding, push-fit or clamp-connection
Frischhut
Diameter: 40 mm - 400 mm
Operating pressure: 10, 16 bar
According to DIN 28601; DIN EN 545 series A From DN 500 only with gland sockets deliverable (according DIN 28602) Features Special coatings: Coating inside and outside Epoxy redbrown for sewage water Coating inside ...
Frischhut
Diameter: 3 mm - 15 mm
The hose tubing connector is characterized by its cylindrical straight structure. It fits various hose sizes and has two versions. The Polypropylene type resists working temperatures of up to +135°C while the Polyvinylidene ...
Diameter: 4 mm - 17 mm
The Burkle universal hose tubing connectors for diameters from 4 to 17 mm feature conical nozzles and can be made out of PP or PVDF. The PP type has heat resistance up to 135 °C, while the PVDF type has heat resistance up to 160 °C and ...
Diameter: 1.25 in
The plug and socket fitting portion of couplings 20, 30 and 40 are interchangeable, as are those of the 400, 600 and 800 couplings. This means that a coupling 20 may be connected to a 30 or 40, the only difference being ...
Diameter: 1 in
The plug and socket fitting portion of couplings 20, 30 and 40 are interchangeable, as are those of the 400, 600 and 800 couplings. This means that a coupling 20 may be connected to a 30 or 40, the only difference being ...
Diameter: 0.25 in
The plug and socket fitting portion of couplings 20, 30 and 40 are interchangeable, as are those of the 400, 600 and 800 couplings. This means that a coupling 20 may be connected to a 30 or 40, the only difference being ...
Diameter: 1.6 mm - 11.5 mm
Operating pressure: 0 bar - 7,000 bar
MCS® High-Pressure fittings were conceived due to the need of offering an extremely reliable product to the high pressure industry. They are made with cold worked AISI 316L and are available in NPT versions up to 1035 ...
Multi-coupling-system
Diameter: 3.2 mm - 17.5 mm
Operating pressure: 0 bar - 1,400 bar
MCS® High-Pressure fittings were conceived due to the need of offering an extremely reliable product to the high pressure industry. They are made with cold worked AISI 316L and are available in NPT versions up to 1035 ...
Multi-coupling-system
Diameter: 3 mm - 20 mm
Operating pressure: 1,050 bar
MCS® High-Pressure fittings were conceived due to the need of offering an extremely reliable product to the high pressure industry. They are made with cold worked AISI 316L and are available in NPT versions up to 1035 ...
Multi-coupling-system
Diameter: 16 mm - 110 mm
Operating pressure: 16 bar
... for generic applications. The quality of the materials used makes these fittings resistant to etching by numerous chemical substances and to UV-rays. The Unidelta Universal Fitting can be used to connect ...
Unidelta S.p.A.
Diameter: 3 mm - 14 mm
Operating pressure: 0.5 bar - 12 bar
Series of push-in fittings with reduced dimensions and new collet and release collar. They are for connecting nylon and polyurethane tubes. Available in various configurations (studs, elbows, T, Y) and with threads Gas ...
Diameter: 2.5 mm - 15 mm
Operating pressure: 0.5 bar - 12 bar
Series of rapid fittings for connecting nylon and polyurethane tubes. They should be used in all those applications where a safer tube-fitting connection is required. Available in various configurations ...
Diameter: 0.125 in - 1 in
Operating pressure: 0.5 bar - 12 bar
Series of standard fittings available in various configurations to adapt the connections of every installation according to one’s requirements. With threads Gas taper (BSPT) and Gas parallel (BSP).
Diameter: 18, 20, 12, 16, 10 mm
Operating pressure: 1,200 bar
Standards adaptors are also available individually. If among our standards adaptors or high pressure adaptors you don't find what you are looking for, our Design Office remains at your disposal to design and manufacture the adaptor ...
AREMECA
Operating pressure: 100 psi
Barbed fittings with Orifice Insert Barbed fittings with Orifice Insert These barbed fittings feature an integral precision orifice. Specifications ACCURACY: See “Precision Orifices” MATERIAL: ...
Completely raparaible and disassemblable - Pressurized and depressurized connectable - Suitable for fluids and gases - Functional parts - high strength stainless steel - Mounting into individual contour - Flow optimized (real diameter) - ...
MECHANISM / NIPPLE, ND 6/10 UP TO 250 BAR These coupling elements can only be mechanically coupled and are used to transfer liquid and gaseous media. - Pressurized and depressurized connectable - Suitable for fluids and gases - ...
Diameter: 16 mm - 50 mm
ARPR brass nickel plated quick lock fitting with strain relief Material Metal Colour Nickel Material quality Brass Model Plug-in to threaded Quality of surface coating Galvanic zinc-nickel coated Surface protection ...
Diameter: 4, 6 mm
Operating pressure: 10 bar
- Straight male connector for flexible tube - Male thread connection: G 1/8" - Corrosion-resistant - High level of gas tightness - Material of sample-contacting parts: PVDF Hose and tube screw connectors as well as fittings ...
M&C TechGroup Germany GmbH
Diameter: 6 mm
-Straight male connector with barbed fitting for flexible tube -Barbed fitting: DN 6 -Corrosion-resistant -High level of gas tightness -Material of sample-contacting parts: PP hose nozzles, ...
M&C TechGroup Germany GmbH
Diameter: 8 mm
Straight male connector with barbed fitting for flexible tube Thread size: G 1/8" Barbed fitting Corrosion-resistant High level of gas tightness Material of sample-contacting parts: PP hose ...
M&C TechGroup Germany GmbH
Pipe connectors Suitable for realizing watertight, current leading connections between high current pipes. Hexagonal design is standard. But on request also in octagon or as groove nut design deliverable.
KROMA MEC SRL
Exd II C Reducers are used to provide a means of attachment between apparatus, pipes and mouthpieces of dissimilar thread forms. Threads: - BSP TAPER BS 21 - NPT (ANSI B1.20.1) Materials: - Mild steel zinc plated - ...
KROMA MEC SRL
Exd Nipples allow connections between female mouthpieces. Threads: - BSP TAPER BS 21 - NPT (ANSI B1.20.1) Materials: - Mild steel zinc plated - Stainless steel
KROMA MEC SRL
Diameter: 3 mm - 14 mm
Operating pressure: 20 bar
The MA is our “Automatic push-in fitting” line. It enables quick connections with calibrated plastic hoses at any time, at any stage of the pneumatic circuit and by a simple hand movement. The connection and the fitting ...
C.Matic S.p.A.
Diameter: 6 mm - 18 mm
Operating pressure: 0 bar - 16 bar
The MT is the new push-in fittings line that has been developed and designed to ensure high reliability and safety in the pneumatic braking systems on commercial and industrial vehicles. The push-in fittings ...
C.Matic S.p.A.
Diameter: 0.156 in - 0.75 in
Operating pressure: 290 psi
Push in fittings for Vehicles applications complying with DOT FMVSS §571.106, SAE J2494-3 e SAE J1131 specs. 1-2 > Body and Release Ring: Brass UNI EN 12164 CW614N - UNI EN 12165 CW617N Nickel Plated 3 > Holding Ring: ...
C.Matic S.p.A.
Diameter: 6 mm - 60.3 mm
Connecting two pipes Aseptic flange connection according to DIN 11864-2 with buttweld ends for orbital welding with O-Ring. Material: 316L (1.4435), Fe < 0.5%. Sterilizing temperature: 150°C. With marking of batch number, material, ...
CONNECTORS
Diameter: 11 mm
Operating pressure: 40 bar
Eliminates premature wear of the supply hose. Reduces muscle strain caused by the rigidity of the flexible, easy washing in places with difficult access. Durable, thanks to mechanical stainless steel components and Aluminium ...
MID - VARIACOR
Diameter: 16 mm
Operating pressure: 12 bar
The connection freely directional DynaVariacor helps you to fill the tank! Softens and makes handy the pipes semi-rigid of the petrol stations. Reduce the efforts, increases the manoeuvrability of the nozzle. Avoid the inopportune ...
MID - VARIACOR
Diameter: 25 mm - 65 mm
Operating pressure: 20, 40 bar
Make your fire interventions more comfortable , your progress on ground more efficient ... Increases pliability of fire hose, less effort due to hose rigidity, Makes easier using fire hose in hard to access area, Reduces step ...
MID - VARIACOR
HYDRAULIC INDEX : *HYDRAULICS FITTINGS (STEEL AND STAIN) * STAIN FITTINGS * CLAMPS * STELL FITTINGS SERIES 100 AND 250 KG BRIGGS AND SOCKET WELDING 3000 AND 6000 IBS * ...
NORMYDRO
NORMYDRO
NORMYDRO
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining