Diameter: 4 mm - 12 mm
Operating pressure: 0 bar - 15 bar
... HA Technopolymer Push-In Fittings CHARACTERISTICS Temperature-20 80 °C (based on the type of tube) Fluidcompressed air, vacuum Max pressure15 bar Working pressure-0,99 -5-10 bar Bodytechnopolymer Fixing elementsnickel-plated ...
... ALEMITE 1⁄4”-28 Taper Thread Fittings are used on most cars and trucks, as well as many industrial machines. It is recommended that SAE-LT taper threads be assembled into 1⁄4”-28 UNF, Class 3B, straight threaded holes ...
Alemite
Diameter: 0.04 in - 1.5 in
... Offering protection from flammability, high heat, abrasion, and chemicals. Alpha tubing has the size for your wire and cable routing needs. ...
Diameter: 5.5 mm - 45 mm
... 90°, swivel or fixed fitting which is screwed into the female thread of the adapter. Since RNA-316 cable-hose fittings are available up to 1.1/4”, the RNC-316 1.1/2” to 3” adapter in combination with Anaconda stainless ...
Anamet Europe
Diameter: 14 mm - 66 mm
Operating pressure: 10 bar
... Connections - hoze nozzle – male thread Approvals - EURASEC Hygienic Certificate, GOST Certificate, Rostehnadzor Permission ...
Praher Plastics Austria GmbH
Diameter: 80, 50 mm
Operating pressure: 25 bar
... Normative Regulation:EN 14 420-6 / DIN 28450 Coupling Material :Brass Gaskets Material :NBR , PU Connection Mechanism : Locking the lever from the female part ...
LUXECASTING INTERNATIONAL GROUP
Diameter: 80 mm - 200 mm
Operating pressure: 16, 10 bar
... Fitting with spigot-end connection on one side and flange connection on the other for the connection of VAG BAIO®plus System components. Suitable for use in water distribution applications. Sealing system/standard: Fitting ...
VAG-Group
Diameter: 6 mm - 38 mm
Operating pressure: 315, 400 bar
... Straight Bulkhead Coupling SR-526M with parallel metric thread to DIN 13 ...
Schwer Fittings
Diameter: 20 mm - 110 mm
Operating pressure: 16 bar
... Unions are the preferred choice over flange adaptors for the connection of plastic pipes. With no metal parts, there is no corrosion and the weight is also reduced. They are only available in small sizes (up until D110). The union ends are manufactured ...
Cepex SER
Diameter: 19 mm
Operating pressure: 15.6, 25 bar
... Emergency-release couplings are self-activated and they disconnect automatically and non-destructively the two coupling halves when a pre-determined calculated break-away force is exceeded. The emergency-release coupling may be reconnected in an instant ...
WALTHER-PRÄZISION
Diameter: 32 mm - 92.2 mm
Operating pressure: 10 bar - 16 bar
... 400˚F). 90˚Elbow Cam & Groove Fittings (PTFE Lined Only) 90˚ Elbow Integral PTFE lined Cam & Groove Fittings are available for sizes 1”, 11/2” and 2” - see 90˚ Elbow Fittings. Notes: For Integral ...
AFLEX HOSE LTD.
Diameter: 1.6 mm - 12.7 mm
Operating pressure: 125 psi
... Barbs molded without parting line，100% Virgin Materials，100% Quality Inspection，Application Range: 125 PSI, w/o clamps，Standard, Reducing, & Enlarging，Leak resistant "Sharp Barb" design Applications： Using for peristaltic pump head Product Instruction： - ...
... High quality pipe fittings are mainly used in the following industries: nuclear power, military, petrochemical engineering, refinery, electronic, electric power, paper making, iron & steel, coal chemical engineering, pharmaceutical,pharmaceutical, ...
Diameter: 1 mm - 300 mm
Operating pressure: -1 bar - 8 bar
... For pressure and vacuum tests in a range of external diameters of components Use The innomatec connec ® KA type quick connector system seals tubes, connection pieces, hoses and all types of cylindrical bodies and connects them to the desired control ...
innomatec
Diameter: 50 mm - 315 mm
Operating pressure: 16 bar
Standard：It is applied by national standard GB/T13663.3-2018 and European standard EN12201-3 for electrofusion reducer of Donghong.
These high quality connectors were manufactured by the Colder Products Company, which is one of the leaders in the industry. These products are the right fit even for the most demanding applications, and come with precise hose barbs that ensure your application ...
CPC - Colder Products Company
Diameter: 0.25 in - 2 in
Operating pressure: 20 bar
... C • - Max Température Ts :+ 180°C • - Max Pressure Ps : 20 bars RANGE : • - From DN 1/8* to DN 4a • - ASTM A351 CF8M fittings excepted for Ref.2034. 2038. 2039. 2040. 2041 and 2042 in SS ASTM A182 F316 ...
SFERACO
Diameter: 20 mm
Operating pressure: 40 bar - 64 bar
... This series of ISO Threaded Fittings from FG INOX are made with AISI 316L stainless steel, and may come with a hose shank. They may also be welded with either a flat or a conical seat. These products are available in sizes from 5 to 100 ...
FG INOX
Diameter: 3.175 mm - 25.8 mm
Operating pressure: 14 bar
... Fittings to be used with all kind of very corrosive fluids like Acids, Weak bases, Halogens, Alcohols, Salts, Heavy duty oxidants, Detergents, etc. UV resistant, Nuclear resistant. Comments Advantages: for special aggressive chemical ...
TEFEN
Operating pressure: 0.5 bar - 10 bar
... - plug-in coding: round, triangular, hexagon, octagon - Fool-proof coding - 1.4404 (316L) / 1.4571 (316Ti) stainless steel - Seals: low temperature -50°C to 200°C (red) FDA - working pressure 0,5 bis 10 bar - With shut-off function - Suitable for ...
EISELE GmbH
Diameter: 16 mm - 50 mm
... The new product range includes the following connection elements: 90° elbow, straight joint, joint for pipe-box connection and joint for pipe-sheath connection. The new fitting does not have assembled parts and the seal ...
Diameter: 0.25 in - 4 in
... ML Int. finishing: Ra ≤ 0,4 µm Machined Finish Ext. finishing: Ra ≤ 0,8 µm Mirror Polished ...
Diameter: 10 mm - 54 mm
... Straight Fitting - Fixed External Thread Description: For insertion into threaded entries & knockouts. Locknut supplied with METRIC THREAD ONLY Material: Polyamide (Nylon) 66 IP Ratings: IP66, IP67, IP68, ...
ADAPTAFLEX
Operating pressure: 40, 10 bar
... Product overview
The clamp
fitting is a compact mounting solution for temperature sensors, designed for fast installation, adjustable insertion depth and options for vacuum or preload contact pressure.
Product characteristics ...
Diameter: 6.3 mm
Operating pressure: 450 bar
... - Interchangeable according to ISO 14541 - Conical valve with O-ring - Connection under pressure allowed - Threaded fixation of coupling Threaded couplings are designed for quick connection and disconnection of hydraulic lines in the hydraulic system ...
Hydrosila
Diameter: 6, 4 mm
... The Ball Valve Fitting is designed for efficient fluid control in various applications. It is known for its durability and ease of use, making it a reliable choice for both industrial and commercial settings. - Durable construction for ...
Ningbo Phen Automation Co., Ltd
Diameter: 20 mm - 630 mm
Operating pressure: 10 bar
... PE/steel transition fitting with weldable terminal. Made by injection moulding, it is used for connection of different materials (one of which is polyethylene) on fuel gas piping systems. - Materials: - Carbon steel tubing according ...
MACPLAST SRL
Diameter: 6 mm - 25 mm
Operating pressure: 35, 42 MPa
Gemels S.p.A.
Operating pressure: 0 bar - 15 bar
... Body Material - Plastic/Zinc alloy Operating temperature - -10-60°C(14-140°F) Working pressure - 0-1.0Mpa(0-145psi) Minimum negative pressure - -100Kpa(-14.5psi) Maximum pressure - 1.5MPa (217.5psi) Available medium - Air Applicable ...
Foshan Chanle Plastic Products Co.,Ltd.
Diameter: 25 mm - 63 mm
Operating pressure: 16, 10 bar
... enabling it to be installed quickly, efficiently and without errors. The advanced development of the tried-and-tested ISO fitting is therefore operational from the very first moment. Installation and dismantling are performed easily with ...
Hawle
Diameter: 6 mm - 19 mm
Operating pressure: 10 bar
... Temperature Range -20°C, +200°C Working Pressure 10 Bar Type Water ...
TEKNO-MET BAĞLANTI ELEMANLARI SAN. ve TİC. LTD. ŞTİ
... WELDABLE FEMALE OIL-PORT WELDABLE MALE OIL-PORT FEMALE INLET OIL-PORT MALE INLET OIL-PORT ...
Diameter: 1.2 mm - 4.5 mm
Operating pressure: -0.75 bar - 10 bar
... Straight push-in fitting M-Push 110 brass design nickel-plated with male thread and external hexagon Type: gerade Steckverschraubung Temperature range: 0 °C to +60 °C Material of base body: Brass nickel-plated Material ...
Diameter: 6, 4 mm
Operating pressure: 60 bar
... • Male Threaded Slip on Union - • High grade Brass Nickle plated - •1/8" BSP 6mm/4mm - • 15-25 Bar - • 60 Bar - • -20oC to +80oC ...
Diameter: 32 mm - 50 mm
Every vacuum cleaner needs it’s proper cleaning accessories. Offering a wide range of many different accessories with different diameters, coloured, FDA approved and ATEX certificated, and even made in Stainless Steel, we ensure that every costumer will ...
Starvac
Diameter: 0.125 in - 48 in
... Stainless Steel 304 Fittings, SS S30400 Buttweld Fittings, Stainless Steel 304 Forged Fittings, ASTM A182 F304H SS High Pressure Forged Fittings, ASME SA403 WP304 Stainless Steel Seamless ...
MOXY STEEL IMPEX
Diameter: 6.1 mm - 8.1 mm
... Surface Treatment Options White Zinc Plated Black Zinc Plated Polished Electropolished ...
PGS GROUP
Diameter: 0.75, 1, 1.25, 1.5 in
Operating pressure: 10 bar
... 228/1 Connectivity standard Internal thread GAS cylindrical ISO 228/1. Connectivity standard Bucchi srl for pipe fittings adopts as standard connection ISO 228/1; in order to improve hydraulic seal has decided to create its own ...
Bucchi S.r.l.
... Application : - A secure and all-purpose hose coupling solution for high-pressure and high-temperature applications, universally recommended for steam hose connections. - This system is generally used with large bore air hoses or any size steam ...
DIXON GROUP EUROPE
the best suppliers