Diameter: 20 mm - 110 mm
Operating pressure: 16 bar
... Unions are the preferred choice over flange adaptors for the connection of plastic pipes. With no metal parts, there is no corrosion and the weight is also reduced. They are only available in small sizes (up until D110). The union ends are manufactured ...
Cepex SER
Diameter: 19 mm
Operating pressure: 15.6, 25 bar
... Emergency-release couplings are self-activated and they disconnect automatically and non-destructively the two coupling halves when a pre-determined calculated break-away force is exceeded. The emergency-release coupling may be reconnected in an instant ...
WALTHER-PRÄZISION
Diameter: 32 mm - 92.2 mm
Operating pressure: 10 bar - 16 bar
... 400˚F). 90˚Elbow Cam & Groove Fittings (PTFE Lined Only) 90˚ Elbow Integral PTFE lined Cam & Groove Fittings are available for sizes 1”, 11/2” and 2” - see 90˚ Elbow Fittings. Notes: For Integral ...
AFLEX HOSE LTD.
Diameter: 4 mm - 22 mm
Operating pressure: 16 bar
... Material - Body and thrust ring: nickel plated brass Thread - Metric, taper and parallel Seal - NBR rubber Clamp - Stainless steel AISI 316 Size - M5 ÷ G 1/2 Fluid - Air, water, oil, steam Working temperature - - 20 ÷ +70 °C Permissible ...
Waircom
Diameter: 22, 10, 15 mm
Operating pressure: 10, 5 bar
... Easily connects to a tap or syphon connection (washer included) JG Speedfit straight tap connector push-fit fitting for the connection of plastic or copper pipes to fixtures or appliances with a MBSP connection point. ...
JOHN GUEST
... High quality pipe fittings are mainly used in the following industries: nuclear power, military, petrochemical engineering, refinery, electronic, electric power, paper making, iron & steel, coal chemical engineering, pharmaceutical,pharmaceutical, ...
Diameter: 22.6 in - 62.7 in
... For use with Nonmetallic Heyco-Flex™ I Electrical Conduit Straight-Thru, NPT Hubs FEATURES - Cost effective die-cast zinc construction provides durability and resists rough environments. - Liquid Tight when used with Heyco-Flex™ I Liquid ...
Heyco
Diameter: 50 mm - 315 mm
Operating pressure: 16 bar
Standard：It is applied by national standard GB/T13663.3-2018 and European standard EN12201-3 for electrofusion reducer of Donghong.
Diameter: 0.25 in - 2 in
Operating pressure: 20 bar
... C • - Max Température Ts :+ 180°C • - Max Pressure Ps : 20 bars RANGE : • - From DN 1/8* to DN 4a • - ASTM A351 CF8M fittings excepted for Ref.2034. 2038. 2039. 2040. 2041 and 2042 in SS ASTM A182 F316 ...
SFERACO
Diameter: 20 mm
Operating pressure: 40 bar - 64 bar
... This series of ISO Threaded Fittings from FG INOX are made with AISI 316L stainless steel, and may come with a hose shank. They may also be welded with either a flat or a conical seat. These products are available in sizes from 5 to 100 ...
FG INOX
Diameter: 3.175 mm - 25.8 mm
Operating pressure: 14 bar
... Fittings to be used with all kind of very corrosive fluids like Acids, Weak bases, Halogens, Alcohols, Salts, Heavy duty oxidants, Detergents, etc. UV resistant, Nuclear resistant. Comments Advantages: for special aggressive chemical ...
TEFEN
Operating pressure: 0.5 bar - 10 bar
... - plug-in coding: round, triangular, hexagon, octagon - Fool-proof coding - 1.4404 (316L) / 1.4571 (316Ti) stainless steel - Seals: low temperature -50°C to 200°C (red) FDA - working pressure 0,5 bis 10 bar - With shut-off function - Suitable for ...
EISELE GmbH
Diameter: 16 mm - 50 mm
... The new product range includes the following connection elements: 90° elbow, straight joint, joint for pipe-box connection and joint for pipe-sheath connection. The new fitting does not have assembled parts and the seal ...
Diameter: 0.25 in - 4 in
... ML Int. finishing: Ra ≤ 0,4 µm Machined Finish Ext. finishing: Ra ≤ 0,8 µm Mirror Polished ...
Diameter: 10 mm - 54 mm
... Straight Fitting - Fixed External Thread Description: For insertion into threaded entries & knockouts. Locknut supplied with METRIC THREAD ONLY Material: Polyamide (Nylon) 66 IP Ratings: IP66, IP67, IP68, ...
ADAPTAFLEX
Diameter: 20 mm - 630 mm
Operating pressure: 10 bar
... PE/steel transition fitting with weldable terminal. Made by injection moulding, it is used for connection of different materials (one of which is polyethylene) on fuel gas piping systems. - Materials: - Carbon steel tubing according ...
MACPLAST SRL
Diameter: 6 mm - 25 mm
Operating pressure: 35, 42 MPa
Gemels S.p.A.
Diameter: 25 mm - 63 mm
Operating pressure: 16, 10 bar
... enabling it to be installed quickly, efficiently and without errors. The advanced development of the tried-and-tested ISO fitting is therefore operational from the very first moment. Installation and dismantling are performed easily with ...
Hawle
Diameter: 6 mm - 19 mm
Operating pressure: 10 bar
... Temperature Range -20°C, +200°C Working Pressure 10 Bar Type Water ...
TEKNO-MET BAĞLANTI ELEMANLARI SAN. ve TİC. LTD. ŞTİ
... WELDABLE FEMALE OIL-PORT WELDABLE MALE OIL-PORT FEMALE INLET OIL-PORT MALE INLET OIL-PORT ...
Diameter: 1.2 mm - 4.5 mm
Operating pressure: -0.75 bar - 10 bar
... Straight push-in fitting M-Push 110 brass design nickel-plated with male thread and external hexagon Type: gerade Steckverschraubung Temperature range: 0 °C to +60 °C Material of base body: Brass nickel-plated Material ...
Diameter: 6, 4 mm
Operating pressure: 60 bar
... • Male Threaded Slip on Union - • High grade Brass Nickle plated - •1/8" BSP 6mm/4mm - • 15-25 Bar - • 60 Bar - • -20oC to +80oC ...
Our connector for rectangular tubes has been designed with 2 cavities for hexagonal nuts. We can supply the part without nuts, or with a nut up, or one nut down, or with the 2 nuts. Please consult us.
Diameter: 6.1 mm - 8.1 mm
... Surface Treatment Options White Zinc Plated Black Zinc Plated Polished Electropolished ...
PGS GROUP
the best suppliers