Straight fittings

Diameter: 0.25 in
Operating pressure: 325 bar

... zinc-plated. Max. operating pressure 325 bar. Since the clamping modules after blow-off of the opening pressure are mechanically locked, the hose is then uncoupled by means of the quick couplings. The advantage of this is that there are no interfering ...

Diameter: 50 mm - 150 mm

... PU threaded connector for all Master-PUR L, Master-PUR H and Master-PUR HX hose types, based on DIN ISO 228 Description, addition to product name - PU threaded connector for all Master-PUR L, Master-PUR H and Master-PUR HX hose types, based on DIN ...

Diameter: 50 mm - 150 mm

... threaded connector for attaching fittings to Master-PUR Food hoses, approved for direct food contact EU 10/2011, following DIN ISO 228 Description, addition to product name - cast-on PU threaded connector for attaching fittings ...

Diameter: 32 mm - 300 mm

... screw-on PU end fitting for Master-PUR hoses on spigots acc. to DIN 2448/DIN 2458, permanently antistatic Description, addition to product name - screw-on PU end fitting for Master-PUR hoses on spigots acc. to DIN ...

Operating pressure: 1,000 psi

... • All fitting threads meet standards from DrySeal American Standard Taper Pipe Thread (NPTF) • Made from CA 360 and CA 345 brass • Top quality finish • Meet functional requirements of SAE J512, American Society of Mechanical Engineers ...

Diameter: 4 mm - 16 mm
Operating pressure: -0.1 MPa - 1 MPa

... . Various sizes of unequal union type makes it possible to handle with just one fitting, although two or more fittings are used before. It reduces the amount of fitting used and enables cost and space ...

Diameter: 3, 10, 2, 1.8, 6 mm
Operating pressure: -0.1 MPa - 1 MPa

... Mini-type fitting is 40% smaller than the standard type fitting. Even the ultra-small size, tube can be easily connected or disconnected. The elliptical, ultra-small release ring is employed. Easy to press oval ...

Diameter: 3 mm - 6 mm
Operating pressure: -0.1 MPa - 0.5 MPa

... Barb joint best suitable for space-saving piping. They are optimal for piping vacuum equipment. (Use with vacuum tube.) As for compression type, tube can be tightening by hands. Clean-room Package, best suitable for compact piping in cleanroom, is ...

Diameter: 3 mm - 50 mm
Operating pressure: 1,000 bar

... For permanent pipe connections ■ With weld-on ends on both sides ■ Straight version, angles and Tee form ■ Temperature-resistant from -270 °C up to +650 °C (dependent on the material used) ■ Available for pressures up to 1,000 ...

Diameter: 3 mm - 50 mm
Operating pressure: 1,000 bar

... For variable application ■ With weld-on end and screw-in thread ■ Straight version, angles and Tee form ■ Metric, Whitworth or NPT thread ■ Temperature-resistant from -270 °C up to +650 °C (dependent on the material used) ■ ...

Diameter: 3 mm - 40 mm

... ■ Available as weld-on or screw-in version ■ For pressures up to PN 100 ■ Metric or Whitworth thread ■ Three-part union consisting of weld-on stub, clamping nut and weld-on thread stub or screw-in stub ...

Diameter: 0.125 in - 0.75 in
Operating pressure: 0 bar - 21 bar

... the most appropriate direction. Therefore, they are suitable for installations requiring production diversification. The fitting and adjustment of the joints can be done quickly by tightening the hexagonal screw cap. ...

Diameter: 0.125 in - 0.38 in
Operating pressure: 0 bar - 15 bar

ZRP triangular flanged swivel joints have a robust metallic structure, are easy to fit and adjust and are widely used in manufacturing plants requiring product diversification.

Diameter: 1 in - 2.5 in
Operating pressure: 0 bar - 9 bar

ZRQ series swivel joints are suitable for operating environments requiring large capacities and product diversification. Once set, they can be easily fitted and adjusted.

Diameter: 10 mm - 54.5 mm

... Connectors FLEXAquick for ROHRflex corrugated plastic tubings Plastic connector, quick-type, straight, plug-type connection, conically sealed Material PA plastics Temperature -40°C ... +120°C Protection class [acc. to EN 60529]: ...

Diameter: 10 mm - 56 mm

... Metal connector, safety-type straight, outer thread metric or PG incl. ferrule [brass/plastic], sealing [TPE] or brass thrust collar and O-ring [NBR] Material: nickel-plated brass Temperature range: -40°C ... +125°C -40°C ... ...

Diameter: 10 mm - 56 mm

... Metal connector, safety-type straight, metric outer thread, strain relief, incl. ferrule, sealing made of TPE or brass thrust collar [MSD] and O-ring Material: nickel-plated brass Temperature range: -40°C ... +100°C Prot. rate ...

Diameter: 18.7 mm - 67.5 mm

... Polyamide fitting Protection class - IP 55 Temperature range - -30°C to +80°C Colour - black,grey Variant - PG,Metric ...

Diameter: 6 mm - 69.3 mm

... Metal fitting Material - Nickel-plated brass Temperature range - -20°C to +80°C Metal fitting S Material - Nickel-plated brass Temperature range - -20°C to +80°C Metal fitting pro Material ...

Operating pressure: 10 bar

... Compression fitting for copper, precision steel and stainless steel tubes Material - Nickel-plated brass,Coated brass Material moulded seal - EPDM Material clamping ring - Brass blank Max. operating pressure - 10 bar Max. operating ...

Diameter: 0.5, 0.75 in

... Technical Data Connection Size: Thread 1/2"NPT(F) x 1/2"NPT(F) or 3/4"NPT(F) x 3/4"NPT(F) available Body Material: SS316L ...

Diameter: 4 mm - 65 mm

mbo Oßwald can now meet the requirements for individual drawing parts in a faster, more precise, and more economical manner. New in-house parts production will help mbo Oßwald in manufacturing better quality special workpieces and parts with high levels ...

Diameter: 0.125, 0.25 in

... Clippard bulkhead fittings come with the internal thread of 10 - 32, 1/8 NPT and 1/4 NPT, Thd Mtg. of 15 / 32 - 32, 1/8-27 NPT and 3/4-20. Other specifications include "A" (0.500", 1.000" and 1.000"), "B" ( 0.125", 0.250" and 0.250") ...

Diameter: 0.125, 0.063 in

... Details #10-32 to 1/8” Tube Connector Notes Use with Copper or Nylon tubing. One-piece ferrule and nut for fast, easy insertion of tube. See Catalog: Page 320 Additional Information Documentation : CA Prop. 65 Gasket : Brass Material : Brass O-Ring ...

Diameter: 0.06 in

... Minimatic barb fittings from Clippard are corrosion resistant due to nickel plating which makes them perfect to be used in applications involving high amounts of moisture. These fittings can substitute ferrules and push-to-connect ...

Diameter: 0.25 in - 1 in
Operating pressure: 0 bar - 1,550 bar

... MAXIMATOR fittings and gland assemblies of the 1,550 bar series are designed for simple and safe connection of HP pipes up to a max. pressure of 1,550 bar. All gland assemblies are fit for multiple use. Fittings are ...

Diameter: 0.25 in - 0.56 in
Operating pressure: 0 bar - 4,500 bar

... MAXIMATOR fittings and bolted unions from the 4,500 bar range offers a low-profile and secured link of HP pipes that can handle the highest pressure of 4,500 bar This series consists of multipurpose bolted unions and the attachments ...

Diameter: 0.31 in
Operating pressure: 0 bar - 10,500 bar

... MAXIMATOR fittings and bolted unions from the 10,500 bar range offers a low-profile and secured link of HP pipes that can handle the highest pressure of 10,500 bar This series consists of multipurpose bolted unions and the attachments ...

... Cap nut: Brass with nickel plated Ring: PA6 Ferrule: Aluminium / brass Gland body: Brass with nickel plated O-ring: NBR Connection thread: Metric (EN60423) / PG (DIN 40430) Properties - Easy to assemble - Fixed or swivel body versions - ...

... Cap nut : Brass with nickel plated Ring : PA6 Ferrule : Aluminium / brass Gland body : Brass with nickel plated O-ring : NBR Connection thread : NPT ANSI B1.20.1 Properties: - Easy to assemble - Fixed or swivel body versions - Apply ...

... Flexible Spiral Conduit Fittings Liquid Tight Female Type Fixed & Swivel Cap nut: Brass with nickel plated Ring: PA6 Ferrule: Aluminium / brass Gland body: Brass with nickel plated O-ring: NBR Connection thread: - Metric (EN60423) ...

... Straight socket male thread Material : Brass Nickel Plated Temperature Range : -20°C +100°C ( -4°F +212°F ) ...

... Straight socket female thread Material : Brass Nickel Plated Temperature Range : -20°C +100°C ( -4°F +212°F ) ...

... Socket extender smooth version Material : Brass Nickel Plated Temperature Range : -20°C +100°C ( -4°F +212°F ) ...

Diameter: 0.4 mm - 19 mm

... COVAL proposes different models of male and female fittings adapted to the different suction cup ranges. ...

Diameter: 12, 10, 8, 6 mm

... distribution . Material: nickel-plated brass Models: . RDV: Straight Fitting . RCOV: Elbow Fitting . Y: Y Fitting ...

Diameter: 10 mm - 20 mm

... Barbed fittings used to connect the vacuum source to the vacuum tube to guarantee a rigid connection. Material: brass Models : . RVM: Straight Fitting (Male) . RVF: Straight Fitting ...

Diameter: 0.09, 0.06, 0.125 in
Operating pressure: 0 psi - 125 psi

... strength of the tube holds around the barbed fitting. Air Logic's first barb is free of a parting line to create a good seal, additional barbs increase holding force for tube retention. Type - 1/4-18 Swivel Straight Wetted ...

Diameter: 0.17, 0.06, 0.13 in
Operating pressure: 0 psi - 125 psi

... Bulkhead Fittings provide a tubing path through a panel, with connections on both sides. A plastic nut is provided to secure the fitting in place. Air Logic's bulkhead fittings can be used as a tubing ...

Diameter: 0.09, 0.06, 0.13, 0.17 in
Operating pressure: 0 psi - 125 psi

... strength of the tube holds around the barbed fitting. Air Logic's first barb is free of a parting line to create a good seal, additional barbs increase holding force for tube retention. Type - 10-32 Swivel Straight Wetted ...

Diameter: 0.13 in - 2 in
Operating pressure: 15 bar - 75 bar

The SP Cupla Type A is recommended for processes involving air, water, hydraulic oil, and chemicals. It yields a maximum working pressure of 15 to 75 bar. The housing materials of this coupling consist of steel, stainless steel, and brass. The seal material ...

Operating pressure: 0 bar - 10 bar

... Hygienic Cupla - Easy Wash Type. For food manufacturing piping. Smart Connect and Disconnect. Easy disassembly and cleanability help in a hygienic management of HACCP. Suitable for food, drinking water, powder, air. Working pressure: 10 bar Solves ...

Diameter: 9.5 mm
Operating pressure: 10 bar

The Micro Cupla model manufactured by Nitto, is a low-pressure quick coupling that features a push-to-connect design. This device offers a compact construction, to deliver piping applications in narrow spaces. Moreover, it is lightweight and consists ...

These tools manufactured by Omega Air, are pneumatic quick couplings that features a scratch resistant material composition. Their flow capacity guarantees users a high compressed air supply for its pneumatic components. Moreover, these devices highlight ...

Diameter: 0.25 in - 2 in
Operating pressure: 10 bar

... Media : Air, Water, Oil, Gas RPM: 1000 RPM Features High-Perfomance Bearings & Seals Dual Connection Available ...

Diameter: 4 mm - 16 mm
Operating pressure: 0 bar - 10 bar

... Ambient temperature: -10°C to +60°C Threaded connection: Male : R - Taper thread, Female : G - Parallel thread Media temperature: +5°C to 50° C Applicable tube material: Nylon, Polyurethane Recommended tolerance for tube OD: ±0.1 mm Features Compact ...

Diameter: 4 mm - 16 mm
Operating pressure: 0 bar - 10 bar

... Ambient temperature: -10°C to +60°C Threaded connection: Male : R - Taper thread, Female : G - Parallel thread Media temperature: +5°C to 50° C Applicable tube material: Nylon, Polyurethane Recommended tolerance for tube OD: ±0.1 mm Features Compact ...

Diameter: 3 mm - 16 mm

... STRAIGHT FITTINGS - BARB-STYLE CONNECTION ► For assembling with hose clips ► Straight version STRAIGHT FITTINGS ...

Diameter: 4, 6 mm
Operating pressure: 10 bar

... - Straight male connector for flexible tube - Male thread connection: G 1/8" - Corrosion-resistant - High level of gas tightness - Material of sample-contacting parts: PVDF Hose and tube screw connectors as well as fittings ...

Diameter: 6 mm

... - Straight male connector with barbed fitting for flexible tube -Barbed fitting: DN 6 -Corrosion-resistant -High level of gas tightness -Material of sample-contacting parts: PP hose nozzles, G-ISO thread, ...

Diameter: 8 mm

... Straight male connector with barbed fitting for flexible tube Thread size: G 1/8" Barbed fitting Corrosion-resistant High level of gas tightness Material of sample-contacting parts: PP hose nozzles, ...

Diameter: 16, 12, 13.7 mm
Operating pressure: -0.99 bar - 20 bar

... connection style fitting is a perfect solution for all applications requiring the Cleaning in Place (C.I.P) sanitation procedure. The assembly and disassembly of a Clamp fitting is very easy and does not require the use ...

Diameter: 6, 8, 10 mm
Operating pressure: -0.99 bar - 25 bar

Operating pressure: 0 bar - 80 bar

... Clamp to compression fitting The Clamp connection style fitting is a perfect solution for all applications requiring the Cleaning in Place (C.I.P) sanitation procedure. The assembly and disassembly of a Clamp fitting ...

Diameter: 6 mm - 100 mm
Operating pressure: 25 bar - 40 bar

UNIONS CONICAL SEAT BW / BW - STAINLESS STEEL 316L

Diameter: 6 mm - 100 mm
Operating pressure: 25, 40 bar

UNIONS CONICAL SEAT BW / MALE - STAINLESS STEEL 316L Inox 316L

Diameter: 8 mm - 50 mm

UNIONS HOSE SHANK CONICAL SEAT - FEMALE HOSE SHANK - STAINLESS STEEL 316L

Diameter: 10 mm - 80 mm

... Threaded hose nozzles series SAS Threaded hose nozzles of SAS series are available in nominal diameters DN10 - DN80. By default they are manufactured and offered in stainless steel AISI 316L. The flexible solution for hose connections of various kinds ...

Operating pressure: 150,000 psi

... Product overview

• Product name: ACC Ultra 150K
• Brand: Hiflux
• Category: High-pressure fittings
• Commercial designation: ACC Ultra

• Industrial