Flow: 900 l/min
Head: 12, 27, 40 m
Power: 5 kW - 12.6 kW
... - Pumping temperature - - 0...80° C higher temperatures upon request Construction Pump body - - cast iron Cover - - cast iron Impellers ...
Brinkmann Pumpen
Flow: 10 l/min
Head: 28 m - 140 m
Power: 0.48 kW - 1.75 kW
... .60° C Construction Pump body - - cast iron Pump shell - - steel Cover - - PBTP Intake strainer - - steel Impellers - - PBTP Shaft - - steel Mechanical ...
Brinkmann Pumpen
Flow: 0 l/min - 90 l/min
Head: 0 m - 270 m
Power: 0.48 kW - 4 kW
... ...80° C Construction Pump body - - cast iron Cover - - cast iron Impellers - - CrNi-steel Shaft - - CrNi-steel Diffusers - - CrNi-steel Mechanical ...
Brinkmann Pumpen
Flow: 1.8 l/min - 713 l/min
Pressure: 0 bar - 25 bar
Fluid temperature: -40 °C - 200 °C
KF series gear pumps are external gear pumps that operate according to the positive displacement principle. Here, the fluid is transported from the suction to the discharge end by rotation of the two ...
Flow: 486 l/min - 2,568 l/min
Pressure: 0 bar - 25 bar
Fluid temperature: -20 °C - 200 °C
... are of grey cast iron. The gear units are manufactured from high-strength case-hardening steel, hardened and mounted in special multi-compound plain bearing bushes. The standard drive shaft is sealed ...
Flow: 19 l/min - 1,200 l/min
Pressure: 7, 8.4, 8.6 bar
Head: 2.4, 2.5, 3.7, 4.5, 4.9 m
The VA industrial range really does set the benchmark for air diaphragm pumps. The range features fast-acting air valve technology – eliminating wasted air and using all of the air for moving the fluid. The efficient ...
Flow: 40, 48 m³/h
Pressure: 10 mbar
Weight: 19 kg
Cast iron pumping unit with a special flange/shaft pulley assembly, air intake check valve and cooling fan. Accessories: Air filter, gas ballast valve.
Srl
Flow: 70, 72 m³/h
Pressure: 10 mbar
Weight: 25 kg
Cast iron pumping unit with a special flange/shaft pulley assembly, air intake check valve and cooling fan. Accessories: Air filter, gas ballast valve.
Srl
Flow: 120, 100 m³/h
Pressure: 10 mbar
Weight: 35 kg
Cast iron pumping unit with a special flange/shaft pulley assembly, air intake check valve and cooling fan. Accessories: Air filter, gas ballast valve.
Srl
Flow: 400 l/min - 450 l/min
Head: 22 m - 57.5 m
Power: 1.1 W - 5.5 W
... ) - Insulation Class F - Protection IP 55 - Minimum Efficiency Index (BEP) MEI ≥ 0,4 MATERIALS - Pump body: Cast Iron - Motor Support: Cast Iron - ...
Speroni
Flow: 90, 70, 80 l/min
Head: 46, 33, 23 m
Power: 0.37, 0.75, 0.55 kW
... Two-Pole induction motor (n = 2850 min-1) - Insulation Class F - Protection IP 44 MATERIALS - Pump body: Cast Iron - Motor support: Cast Iron - ...
Speroni
Flow: 800, 500 l/min
Head: 15.5, 12.9 m
Power: 1.1, 2.2 kW
... induction motor (n = 2850 min-1) - Insulation Class F - Protection IP 55 MATERIALS - Pump body: Cast Iron - Motor Support: Cast Iron - Impeller: ...
Speroni
Flow: 0 m³/h - 90 m³/h
Pressure: 0 bar - 8 bar
Head: 10'00" ft - 150'00"
... integral version (instead of the common plastic flanges) and the armored version (instead of the cast-iron) both allow to reduce the load weight on the pump body Upon request: ATEX ...
Flow: 1 m³/h - 470 m³/h
Pressure: 16 bar
... DIN-EN 733 standards. This pump assembly is the product of the incorporation of a cast iron-designed seal enclosure and motor engine, and flange fixtures that are employed in agreement ...
DAB
Flow: 5, 2.7, 0.9, 2, 1.3 m³/h
Bare semi-rotary manual pumps Descriptive Construction materials Body, cover and lever: cast iron Inner mechanism: brass Waterproofing: graphite ...
Pompes Japy
Flow: 2.7, 1.3, 2, 0.9 m³/h
Bare semi-rotary manual pumps Descriptive Construction materials Body, cover and lever: cast iron Inner mechanism: brass Waterproofing: nitrile ...
Pompes Japy
Flow: 2, 1.3, 2.7, 0.9 m³/h
... Specifications and advantages Bare pump with cast iron lever
Pompes Japy
Flow: 0 l/min - 25 l/min
Pressure: 8 bar
... Temperature max: - +110 C Pressure: - 8 bar Description: - Compact and small diaphragm pump in aluminium and cast iron, ideal for installation ...
Tapflo
Flow: 0 l/min - 78 l/min
Pressure: 8 bar
Head: 0 m - 80 m
... Temperature max: - +110 C Pressure: - 8 bar Description: - It is a mid sized pump available in aluminium cast iron and stainless steel AISI 316L. With the compact ...
Tapflo
Flow: 0 l/min - 330 l/min
Pressure: 8 bar
Head: 0 m - 80 m
... Temperature max: - +110 C Pressure: - 8 bar Description: - T220 and ATEX approved TX220 is a big sized pump available in aluminium cast iron and stainless steel AISI 316L. It measures ...
Tapflo
Flow: 0 m³/h - 17 m³/h
Head: 0 m - 20 m
Power: 0.55 kW - 0.75 kW
Abrasion resistant design in cast iron Drainage pumps made of cast iron and stainless steel. The DN series is designed for long life time including a high quality mechanical ...
LOWARA
... hot spring circulation application. Pump casing and impeller are made of CFPP(POM) material which is heat-resistant and corrosive-resistant for hot spring. It can avoid rusting problem with stainless steel or cast ...
Pressure: 10 bar
Fluid temperature: 60 °C
Weight: 600, 720 g
A, AD Type Modern and compact oil burners pump, designed to pump fuel from the tank to the burner nozzle, at the required pressure. The A – AD type pump is made of a ...
Flow: 1 m³/h - 66 m³/h
Head: 3.5 m - 114 m
Power: 0.37 kW - 9.2 kW
... and lanter bracket in cast iron. B-NM, B-NMD: version with pump casing and lanter bracket in bronze (the pumps are supplied fully painted). Applications - For clean ...
Calpeda
Flow: 0 us gal/min - 6,500 us gal/min
... at temperatures up to 250°F (121°C). The pump internals are capable of being serviced without disturbing piping connections or electrical motor connections. Double-suction, base-mounted Series HSC-S pumps ...
Flow: 95 l/min
Pressure: 5 bar
Head: 16 m
Compact close coupled design Standard NEMA 56J motor Mechanical seal: 5/8″ Type 6A Buna, carbon vs. ceramic standard Materials: F50 AI (Cast Iron) F50 AI (Cast Iro Applications Air ...
Price Pump
Flow: 2.5 m³/h - 68 m³/h
Pressure: 2.5, 20 bar
Fluid temperature: -20 °C - 200 °C
... Plenty T-range screw pump is designed as a low cost general industrial pump for clean liquids. Description The T-range is designed as a low cost general industrial pump for clean ...
Pressure: 600, 720 psi
Fluid temperature: 250 °F
... C6000 series pump casings. The type 7 offers a much improved and extended range yet retains all the interchangeability required for servicing the existing pump population. Cast ...
Flow: 2,200 m³/h
Pressure: 25 bar
Head: 160 m
... water supply and irrigation. Technical Data: Shaft seals: gland packing, mechanical sealing Materials: grey cast iron, nodular iron, cast steel, stainless steel
Flowserve SIHI Pumps
Flow: 1,800 m³/h
Pressure: 16 bar
Head: 140 m
Pumps of the series SIHISuperNova ZLN are horizontal, single-stage volute casing pumps with connections and main dimensions to DIN 24255 / EN 733, plus 19 additional sizes. The design of the pump ...
Flowserve SIHI Pumps
Flow: 0 m³/h - 3,500 m³/h
Pressure: 0 bar - 6 bar
Head: 33 m
... volute-casing pumps can be used where the requirement is for pumping clean, turbid or slightly contaminated liquids. Occasional solid contaminations can be handled without affecting the pump due to the ...
Flowserve SIHI Pumps
Flow: 7 m³/h
Pressure: 7.6 bar
Head: 76 m
... hydraulic efficiency. These pumps are offered with premium efficiency motors and are suitable for high pressure applications. Features High efficiency Compact single shaft design Supplied with counter ...
Flow: 0 m³/h - 14 m³/h
Pressure: 5.5 bar
Head: 57 m
... multistage pumps are end suction and top discharge type supplied with radial flow impeller for higher head requirement. These pumps are centrifugal monoblock type available in both single phase and three ...
Flow: 0 l/min - 4,000 l/min
Head: 0 m - 55 m
Power: 4 kW - 37 kW
... acids and alkalines as well as nearly all chemical solvents. Superior durability The exterior of the pumps is covered with ductile cast iron. Ample pressure resitance has been provided ...
Flow: 70 l/min - 600 l/min
Head: 0 m - 30 m
Power: 1.5 kW - 4 kW
... chemical process pumps With the MXM series a new generation of mag. drive chemical pumps complete the line-up of our world wide proven process pumps. By the non contact system in conjunction ...
Flow: 26 l/min - 38 l/min
Pressure: 140 bar
Length: 48 cm
The TP03 and TP08 lines of trash pumps are a great example of the power of hydraulics when it comes to pumping liquids with solids. The TP03 pump provides 450 gallons per minute (1688 lpm) of discharge ...
Stanley Infrastructure
Pressure: 600 psi - 720 psi
Fluid temperature: 250 °F
... C6000 series pump casings. The type 7 offers a much improved and extended range yet retains all the interchangeability required for servicing the existing pump population. Cast ...
Flow: 227 m³/h
Pressure: 26 bar
Head: 128 m
... Modular design concept Parts interchangeability Wide range of liquids handling MATERIALS All Cast Iron 125# 250# FF flanges per material allowances Ductile Iron/Stainless Steel All ...
RUHRPUMPEN
Flow: 2,271 m³/h
Pressure: 19 bar
Head: 122 m
... Overview Ruhrpumpen's IVP vertical in-line pump design comes in 28 hydraulic sizes. It allows direct connection to the pipelines, which reduces installation costs with a compact design. The IVP pump ...
RUHRPUMPEN
Flow: 400 m³/h - 8,500 m³/h
Pressure: 4.5 bar
Head: 3.5 m - 32 m
... CONSTRUCTION MATERIALS Casing: Cast iron GG-25 Wear Ring: Cast iron GG-25 Impeller: Cast iron GG-25 Shaft sealing: PTFE-coated sealing ...
RUHRPUMPEN
Flow: 215 m³/h
Pressure: 48 bar
... cake up to 40% dry solids content Compact design with high capacity Standard or large auger and optional bridge breaker to ensure a reliable feed Flygt Widethroat W for dewatered sludge Flygt Widethroat W is the ideal ...
Flow: 1.45 m³/h - 163 m³/h
Pressure: 9 bar - 80 bar
Fluid temperature: 85 °C - 130 °C
... contactless running of the pump elements in rotary lobe pumps opens up important perspectives: On one hand it is perfect for hygienic applications due to the complete elimination of abrasion ...
Please specify:
Help us improve:
remaining