Sterling self-priming pumps

Flow: 0 m³/s - 0.4 m³/s
Head: 45 m
Fluid temperature: 70 °C

The SWP is a self-priming pump for solids handling applications. It can handle clear liquids or with solids. Its large volute design allows automatic repriming in a completely open system ...

Flow: 1.6 l/min - 25 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 100 m

The gear pumps of the PM series have a wide range of models that allow the transfer of flow rates ranging from 25 l / min to 280 l / min. This type of pumps are suitable for use in the most diverse sectors ...

Flow: 2.5 l/min - 46.5 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 100 m

The PM V103 gear pump was designed for transfer and dose chocolate and its derivatives. These applications require temperature control to keep all their properties and characteristics. The temperature constancy is essential ...

Flow: 0.1 l/min - 0.5 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 100 m

The hand pump is a simple and cost effective method of moving small and medium quantities of liquid from a 200 L barrel, 60 L drum or a 25 L pail (requires an adapter). The pump is ...

Flow: 189 l/min
Pressure: 1.4 bar - 8.6 bar
Head: 8.8 m

The polypropylene diaphragm pump is built with the highest quality precision parts. Long lasting even when used with abrasive fluids, making this product very cost effective. Professionals turn to this pump ...

Flow: 0 m³/h - 1,850 m³/h
Head: 0 m - 120 m

... operating in optimal condition. The pump utilizes a flexible coupling, which allows the internal pump component to be removed without dismantling of the motor from the pump or the pump ...

Flow: 50 l/min
Pressure: 360 mbar

• Extreme compactness and solidity • High efficiency (up to class A ++) • Integrated heating element • Pressure: 360 mBar – Flow rate: 50 L / min Applications • Domestic and professional dishwashers

Power: 20 W - 400 W

• Asynchronous and brushless motors for rotary vane pumps (flow rates 50-350 l/h) • Low vibrations and noise • Compatible with magnetic drive pumps or mechanical drive pumps ...

Flow: 0.6 m³/h - 158.9 m³/h
Pressure: 0 bar - 16 bar
Fluid temperature: -10 °C - 140 °C

... designed lobes. The pump is authorized to carry 3-A symbol. Note: Consult the options of the pumps authorized to carry 3-A symbol. The SLR pump is a bare shaft rotary lobe pump. ...

... This could even cause the pump to become completely blocked. To maintain the temperature of the chocolate and avoid it solidifying inside the pump we recommend fitting a heating jacket to the front ...

Flow: 115 m³/h
Pressure: 16 bar
Fluid temperature: -10 °C - 140 °C

The HLR pump is a hygienic rotary lobe pump designed in compliance with the EHEDG specifications for plants and processes that comply with the strictest hygienic requirements. Due to the low working speed, ...

Flow: 38, 34, 31 l/min
Weight: 3.6, 3.2 kg

... machinery, tractors, excavators, caterpillar, trucks, etc.; the pumps are not suitable for other media and therefore not for oils, gasoline or water. Protank 25, non-self-priming pumps ...

Flow: 0.5 l/min - 12 l/min
Pressure: 20 bar
Power: 1.8 kW

The m-tec speedy-MP is an easy-to-handle pump for processing soft materials or pumpable products such as structured or decorative renders with a granularity of up to 2 mm. It is mainly used to pump creative ...

Flow: 3 l/min - 22 l/min
Pressure: 30 bar
Power: 4 kW

The m-tec P20 is a compact pump for processing soft materials or pumpable products with a granularity of up to 4 mm. The P20 is mainly used to pump basic, decorative, synthetic resin ...

Flow: 3 l/min - 24 l/min
Pressure: 30 bar
Power: 4 kW

... m-tec m-tec pump is the perfect entry-level model for the automation and automation and 3D printing sector. Advantages Easy adaptation to different materials due to infinitely variable power control Problem-free ...

Flow: 66 l/min
Pressure: 1.5 bar - 2.8 bar
Head: 34, 45, 53 m

Self-priming centrifugal multi-stage pump For pumping rainwater out of storage tanks Rubber feet to suppress pump vibration and noises Integrated stainless-steel ...

Flow: 3 m³/h - 40 m³/h
Head: 4.2 m - 18 m
Power: 0.37 kW - 2.2 kW

Technical data Construction Self-priming swimming pool pumps with built-in strainer and motor insulated from pumped water. The pump is made with high quality plastic ...

Flow: 6.6 m³/h - 108 m³/h
Head: 3 m - 37.5 m
Power: 0.55 kW - 11 kW

Technical data Construction Close-coupled self-priming centrifugal pumps with built-in strainer. B-NMP: bronze version. Applications - For water circulation in swimming pool ...

Flow: 3.6 m³/h - 66 m³/h
Head: 3.3 m - 33.6 m
Power: 0.55 kW - 7.5 kW

Close-coupled centrifugal pumps with open impeller. The built-in backflow preventer avoids reverse siphoning when the pump is stopped and assures automatic re-priming at the next start. The ...

Flow: 0 m³/h - 80 m³/h
Pressure: 0 bar - 15 bar

The FZ series, manufactured by Fristam Pumpen, is a centrifugal pump that offers comprehensive results for high suction operations. his device runs with a 15 bar system pressure and a 6.5 bar discharge pressure. Furthermore, ...

Flow: 0 us gal/min - 50,000 us gal/min
Head: 60 m - 210 m

Design Features of Hayward Tyler Vertical Turbine Pumps The VS range was designed specifically for the nuclear industry and offers three different impeller types. Each impeller type provides a different head-capacity ...

Flow: 0 us gal/min - 44,000 us gal/min
Pressure: 0 bar - 400 bar
Head: 0'00" ft - 1800'00"

Wet Stator Motor Pumps (BCPs) Also known as BCPs or BWCPs (Boiling Water Circulating Pumps), these sealless pumps with an integrated fluid-filled motor eliminate the need for a mechanical ...

Flow: 50 m³/h
Head: 50 m
Power: 45 kW

Self-Priming Pump This pump has a chamber that allows for self priming, suitable for applications with entrained gases and for pumping ...

Flow: 0 m³/h - 560 m³/h
Pressure: 0 bar - 12 bar

Thanks to the vertical construction form, the WANGEN KL-T / KB-T has only a small space requirement. The consistent diameter of the joint connections ensures constant flow speeds and reduces the sensitivity to foreign ...

Flow: 0.02 m³/h - 7 m³/h
Pressure: 20 bar
Fluid temperature: -30 °C - 140 °C

... in the product chamber. Pump disassembly is easily carried out by removing all pump component connections outside the product chamber. Benefits and Characteristics excellent dosing accuracy low dead ...

Flow: 0.01 m³/h - 4.6 m³/h
Pressure: 0 bar - 48 bar

... speed high priming capacity long service life compact construction based on modular principle for high flexibility consistent modular principle simplifies the handling of spare parts optionally with ...

Flow: 10 m³/h - 60 m³/h
Pressure: 12 bar
Power: 5.5 kW - 11 kW

... under control. Flexibility of use and structural strength. In order to achieve these results the pumps had to be equipped with a proportional hydraulic pump, capable of constant power adjustment and ...

Flow: 0 m³/h - 42 m³/h
Head: 0 m - 42 m
Power: 4, 3 kW

Multistage high pressure centrifugal pumps type ZHB are horizontally mounted pumps. They are characterized by a minimum space requirement. Optionally, this series can be equipped with two or three pressure ...

Flow: 0 m³/h - 120 m³/h
Head: 0 m - 58 m
Power: 4, 3 kW

Self-priming centrifugal pumps of the series SM are single-stage horizontally mounted pumps. Because of their robust and durable design the SM pumps ...

Flow: 0 m³/h - 10 m³/h
Head: 0 m - 100 m
Power: 3, 4 kW

The multistage centrifugal pump series KSP has been developed for pumping clean media and media with slight solids loading such as water, emulsions and oils. Schmalenberger offers these pump types for ...

Flow: 17 m³/h - 1,035 m³/h
Head: 28 m - 65.8 m

... efficiency wet prime pump, that after the initial filling, will re-prime in operation. STX series, in 2” to 10”, are designed to work as a drop-in replacement for other self-priming pumps. ...

Flow: 11.5 m³/h - 454.25 m³/h
Head: 40.2 m - 84.4 m

... takes high-head Self-Priming Pumps to the next level; hitting heads 20% higher than our competition. The STH design runs at a slower RPM, while providing larger shafts and bearings to ...

Flow: 81.8 m³/h - 1,558.7 m³/h
Head: 31.7 m - 50.6 m

The 8STL self-priming pump is a premium efficiency wet prime pump developed to meet unique market needs. While the 8STL has all of the great features you get from our ...

Flow: 1 m³/h - 100 m³/h
Pressure: 0 bar - 260 bar

PCM pumps are easy to order, delivered fast, simple to operate and incredibly reliable. PCM Oil & Gas transfer pumps combine the legendary performance and reliability of PCM progressing cavity pump ...

Flow: 0 m³/h - 65 m³/h
Pressure: 0 bar - 15 bar

... together. Benefits of the DL-DSC food peristaltic pump Increased hose life thanks to the hose guide design Various hose materials available Low cost and easy to maintain Only one component on the pump ...

Flow: 55 m³/h
Pressure: 15 bar

... flushing costs Low energy requirements thanks to the inherent low running speed Versatility One pump for all tasks : transfer, dosing, emptying Self-priming High suction lift Reversible Can run ...

Pressure: 700 bar

• Easy to carry – Made of aluminum. • Ergonomic – Easy grip pump lever and relief knob. • High Speed – The pumps have 2-step function that automatically switches between high speed and high pressure. • ...

Pressure: 1,000, 1,500, 2,800 bar

... tensioner. • Oil reservoir in aluminum and valve made in steel (AHP705 and UHP2800). • Ergonomic – Easy grip pump lever and relief knob. • The pumps have a 2-step function that automatically switches ...

Pressure: 700 bar

AIR OPERATED HYDRAULIC PUMPS, 700 BAR • Can be operated by hand or foot. • When operating with foot you get both hands free to hold the tool, (nut splitter, puller, cylinder etc) which is a great advantage ...