Sterling suction pumps

Flow: 0 us gal/min - 5 us gal/min
Length: 191 mm
Width: 139 mm

... AODD) pump. Engineered with original equipment manufacturers (OEMs) in mind, this AODD pump provides tremendous system flexibility as well as: Dual-threaded manifolds that are threaded both internally ...

Flow: 0 us gal/min - 123 us gal/min
Length: 471 mm
Width: 310.29 mm

... excellent flow rates. The Versamatic 1 ½" pump is the performance leader in flow rate at 123 gpm (465 lpm), displacement per cycle and dry suction lift. Additionally, this pump: ...

Flow: 0 us gal/min - 170 us gal/min
Pressure: 7 bar
Length: 742, 754 mm

... clog other pumps, this unique pump has been engineered to fully function in any position. This plastic solids handling AODD pump is also configured to provide a longer service life ...

Flow: 2,270 m³/h
Pressure: 10 MPa
Head: 740 m

... first stage impeller can adopt double suction impeller to reduce pump NPSHr, pump body double volute structure, radial force balance; API standard sealing cavity, suitable for various ...

Flow: 2,600 m³/h
Pressure: 10, 15 MPa
Head: 300 m

... impeller radially split volute, horizontal, centerline mounted. Axial suction, radial discharge, suction and discharge flange pressure rating is the same. The axial force in the pump ...

Flow: 1,000 m³/h
Pressure: 5 MPa
Fluid temperature: 30 °C - 230 °C

... stage, single suction radial impeller, radially split volute. Axial suction, axial discharge, the center of suction and discharge ports are located on the same horizontal line, vertical ...

Flow: 112 m³/h - 10,800 m³/h
Head: 8.5 m - 140 m

Series HFXS pumps are a kind of wear resistance single-stage double-suction centrifugal pumps with horizontal split-case. And it is our new products for delivering the liquid containing ...

Flow: 5, 2.7, 1.3, 0.9, 2 m³/h

... Semi-rotary manual pumps equipped with flexible PVC hose Descriptive Construction materials Body: cast iron Mechanism: brass Waterproofing: by graphite braid. NBR flange O-ring, ...

Flow: 0.9, 2, 1.3, 2.7 m³/h

Semi-rotary manual pumps equipped with a flexible PVC hose Descriptive Construction materials Body: cast iron Mechanism: brass Waterproofing: by nitrile O-ring. NBR flange ...

Flow: 1.3, 2 m³/h

Semi-rotary manual pumps equipped with a flexible PVC hose Descriptive Construction materials Body: cast iron Mechanism: zamak Waterproofing: by nitrile O-ring (not suitable for ...

Flow: 0 m³/h - 15.6 m³/h
Head: 0 m - 16 m
Power: 1.1 kW

CTV 25-11 PLASTIC CTV 25-11 is a 1" vertical pump in PP or PVDF with 1.1 kW motor, capacity of 15.6 m3/h and max head of 16 m. Performance curve The performance curves are based on water at 20°C. Other circumstances ...

Flow: 0 m³/h - 51 m³/h
Power: 2.2, 4, 5.5, 7.5 kW

... self-priming centrifugal pump, manufactured from AISI 316L stainless steel.The self-priming feature allows to use the pump in applications where standard CT pumps do not prove useful. ...

Flow: 18 m³/h - 60 m³/h
Head: 25, 20, 30, 19 m
Power: 2.2, 3.7 kW

... a heavy-duty sludge pump made in cast iron, employing the SB series as its base. On SBA an agitator is provided to assist smooth suction of the pumped fluid. The side-flow, top-discharge design keeps ...

Flow: 0.00012 l/h
Pressure: 200 mbar - 2,200 mbar
Fluid temperature: 0 °C - 60 °C

- Peristaltic pump for wall or front-panel mounting - Reliable condensate removal - Self-priming: pump creates a suction force to draw liquid upwards - With return stop - Rotational speed: ...

Flow: 0.3 l/h
Pressure: 200 mbar - 2,200 mbar
Fluid temperature: 5 °C - 50 °C

- Explosion-proof version according to ATEX for zone 1 - Peristaltic pump for wall or front-panel mounting - Safe condensate removal - Self-priming: pump creates a suction force to draw ...

Flow: 30 m³/h - 2,500 m³/h
Pressure: 12 MPa - 50 MPa
Head: 15 m - 130 m

... It is mainly composed of a motor, pump shell, impeller, guard plate, pump shaft, bearing seals, etc. 2. Unique mechanical seal device to protect the motor from high-pressure water and impurities, ensuring ...

Flow: 950 m³/h - 1,300 m³/h
Head: 20 m - 65 m
Output diameter: 250, 350, 300 mm

RLSDP dredge pump is a new type of sludge pump researched & manufactured by our company basing on International (Warman) Gravel Pumps, aiming at rivers and seas out of repair. RLDSP dredge ...

Flow: 1,500 m³/h - 2,200 m³/h
Head: 20 m - 65 m
Output diameter: 300, 350, 400 mm

RLSDP dredge pump is a new type of sludge pump researched & manufactured by our company basing on International (Warman) Gravel Pumps, aiming at rivers and seas out of repair. RLDSP dredge ...

Flow: 110 m³/h
Pressure: 16 bar
Head: 60 m

... PROLAC HCP SP is a self-priming pump that eliminates the need for a vacuum pump or other devices such as foot valves or additional pipes. The pump needs to be primed ...

Flow: 54 m³/h
Pressure: 10 bar
Head: 50 m

... temperatures close to boiling point. However, the main use of this pump is for CIP return. The impeller is housed between the suction casing and the diffuser, it rotates in conjunction with the pump ...

Flow: 9 m³/h - 87 m³/h
Pressure: 20, 18, 16 bar
Fluid temperature: -20 °C - 140 °C

... is an ideal pump for handling shear-sensitive fluids. It has a high suction lift capability with very low NPSH values. It is capable of pumping liquids with high viscosity, but also with low viscosity, ...

Flow: 22 l/h
Pressure: 15 bar

... a wide range of applications, thanks to several functions included in the same pump, even with few models. Common features for every model: • Foot mounted dosing pump • Corrosion-proof reinforced ...

Flow: 0.6 us gal/h - 6.3 us gal/h
Pressure: 30 psi - 150 psi
Fluid temperature: 0 °C - 60 °C

EZ Series electronic metering pumps offer precise chemical injection at a low cost. The compact size and simple control make them ideal for water treatment and OEM applications. Key Benefits: • Outputs ...

Flow: 4 us gal/h - 20 us gal/h
Pressure: 30 psi - 150 psi
Fluid temperature: 0 °C - 60 °C

... the E-Series metering pumps. EHE Series pumps have outputs up to 20 GPH (75 l/h) and pressure capabilities to 150 PSI (10 bar). Combining the EHE performance with a turndown ratio of 1800:1 yields one ...

Flow: 20,000 m³/h
Head: 0 m - 300 m
Fluid temperature: 80 °C

The ClydeUnion Pumps Uniglide range consists of both configured and engineered to order axially split double suction pumps. Applications Desalination Water treatment, supply and ...

Flow: 1,500 m³/h
Fluid temperature: 427 °C

The ClydeUnion Pumps CUP-BB2 is a heavy duty, horizontal, single or two stage, radially split, between bearings, double suction pump, top-top or side-side suction and ...

Flow: 3,000 m³/h
Fluid temperature: 230 °C

The ClydeUnion Pumps CUP-BB3 pump is a heavy duty axial split case horizontal, pump with opposing impellers with either single or double suction first stage impeller ...

Flow: 300 m³/h
Pressure: 0 bar - 16 bar
Head: 95 m

Pumps of the series ULN are horizontal, self-priming, single-stage volume casing pumps with dimensions and nominal outputs according to EN 733 / DIN 24255 in back pull out construction. The back pull ...

Flow: 140 m³/h
Pressure: 25 bar
Head: 60 m

Single-stage pumping units in compact design with nominal performances according to EN 733 / DIN 24255, where suction and discharge branch are arranged opposite to each other for direct ...

Flow: 65 l/min
Pressure: 14.5, 40 bar
Fluid temperature: 80 °C

Pumps of the series SC have a segmental type construction with open vane wheel impellers. The construction of the SC pump is a so-called centrifugal combined system. This combination pump ...

Flow: 0 us gal/min - 4,000 us gal/min
Pressure: 0 psi - 175 psi
Head: 0'00" ft - 560'00"

The Series e-1510 base mounted end suction pumps deliver the highest efficiencies, performance and durability. All pumps feature stainless steel impellers and an expanded efficiency island ...

Flow: 500 us gal/min - 28,000 us gal/min
Pressure: 175 psi - 300 psi
Head: 30'00" ft - 530'00"

... Double-Suction Split-Case Pump has maintenance-free bearings, one-piece unitized Seal, groutless base plate, alignment-friendly coupling, reduced pump room footprint by up to 40% when ...

Flow: 0 us gal/min - 6,500 us gal/min
Pressure: 0 psi - 400 psi
Head: 0'00" ft - 600'00"

... at temperatures up to 250°F (121°C). The pump internals are capable of being serviced without disturbing piping connections or electrical motor connections. Double-suction, base-mounted Series HSC-S ...

Flow: 70 l/min - 600 l/min
Head: 0 m - 30 m
Power: 1.5 kW - 4 kW

... chemical process pumps With the MXM series a new generation of mag. drive chemical pumps complete the line-up of our world wide proven process pumps. By the non contact system in conjunction ...

Flow: 0.0075 l/h - 45 l/h
Pressure: 4 bar - 17 bar
Power: 17 W - 19 W

... comparable metering pumps. Resistance The combination of the non-elastomeric, durable PTFE diaphragm with outstanding permeation characteristics and the PVDF pump head ensures best chemical resistance. ...

Flow: 2.3 l/h - 25.2 l/h
Pressure: 0 Pa - 1,400,000 Pa
Power: 20 W - 24 W

... metering pumps with precise flow monitoring, feedback & control The EWN-Y electromagnetic pump combined with EFS flow sensor (option) provides accurate real time control & display of dosing rate. The ...

Flow: 0.7 m³/h - 7.8 m³/h
Pressure: 7 bar
Head: 26'03" ft - 29'06"

... Series AODD Pumps for Low- to Middle-Duty Applications Almatec® CXM Series Air-Operated Double-Diaphragm (AODD) Pumps are general-purpose pumps designed for low- to medium-duty applications ...

Flow: 30 m³/h - 2,000 m³/h
Pressure: 0.3 MPa - 2 MPa
Head: 20 m - 500 m

... driven engine fire-fighting water pump group series with high pressure are developed successfully, strictly complying with national standard-GB6245 2006 “Performance requirement and testing method of fire fighting ...

Flow: 18 m³/h - 2,000 m³/h
Power: 10 kW - 720 kW
Fluid temperature: 80 °C

... driven engine fire-fighting water pump group series with high pressure are developed successfully, strictly complying with national standard-GB6245 2006 “Performance requirement and testing method of fire fighting ...

Flow: 8 m³/h - 80 m³/h
Pressure: 0.2 MPa - 2.25 MPa
Power: 1.5 kW - 200 kW

>>> Product Overview: XBD-DL fire pump is a vertical, single suction, multistage centrifugal pump, used to deliver non-particles clean water and fluids similar with water in physical ...

Flow: 10 l/min

... Technical Specifications 12V DC Oil Pump Flow rate: 10 litres per minute Vicosity: up to 500Cst 2 Metre suction height 3/4" BSP inlet/outlet 30 Min Duty Cycle Features & Benefits Quick cleaning ...

Flow: 18 l/min

R1000T drum pump has the same performance as the R-SERIES, R1000S stub pump but with the extended suction tube included. Suits 205L drums. Technical Specifications 10:1 Ratio Pump ...

Flow: 20,000 m³/h
Fluid temperature: 80 °C

... stage, double entry, axially split casing pump Product Category: BETWEEN BEARINGS Uniglide range consists of both configured and engineered-to-order axially split, double suction..... The ClydeUnion ...

Sugar Pump - Magmo Series Product Category: MAGMO Plenty Magmo sugar pumps are designed principally to handle high viscosity abrasive sugar products, such as Molasses, Massecuite and Magma. The ellipse ...

Flow: 800 m³/h
Pressure: 20 bar
Fluid temperature: -40 °C - 200 °C

Twinro Two Screw Pumps Product Category: TWO SCREW The Twinro 2 screw pump is a positive displacement rotary twin screw pump designed for bulk transfer of liquids. It is a heavy ...

Flow: 12 m³/h
Power: 0.37, 0.25 kW
Weight: 8, 12 kg

The FL20C centrifugal pump is well known for its small size and high performance. Despite their small size, these pumps can provide flows up to 12 m3/h with good outcomes. FL20C pumps ...

Flow: 0 m³/h - 110 m³/h
Pressure: 0 bar - 40 bar
Fluid temperature: 0 °C - 120 °C

Vertical in-line pumps Vertical and multistage centrifugal pumps. The in-line design enables the pump to be installed on pipes where the suction and discharge ports ...

Flow: 11.3 l/h - 2,400 l/h
Pressure: 200, 95, 90 bar
Fluid temperature: -20 °C - 150 °C

... the most challenging projects has led to the development of Nexa XP, a special version of Nexa able to cope with extreme suction conditions and a wide range of chemicals. Nexa XP complies with the most stringent requirements ...