- Hydraulics - Pneumatics >
- Pipe, Tube and Fitting >
- Flexible hose >
- Trelleborg Fluid Handling Solutions
Trelleborg Fluid Handling Solutions flexible hoses
Inner diameter: 0.5 mm - 34 mm
Outer diameter: 2 mm - 40 mm
Pressure: 6 bar - 80 bar
FEATURES Bio-Polyamide 11 of vegetable origin derived from castor oil. We produce a wide range of flexible hoses in 12 different colors, linear hoses, spirals, and polytubes for various ...
MEBRA PLASTIK ITALIA SPA
Inner diameter: 12.2 mm - 25.4 mm
Outer diameter: 16.7 mm - 32.3 mm
Pressure: 6 Pa - 12 Pa
The Anaflex click system consists of a highy quality flexible stainless steel AISI-316L hose with a nickel plated brass Anaflex Click fitting. The IP 69 system retains it’s liquid-tight rating up to +250° ...
Delivered length: 1.5 m
Inner diameter: 38 mm - 500 mm
Outer diameter: 46 mm - 510 mm
Pressure: 0.08 bar - 0.63 bar
... 8031 electrical and surface resistance Technology / Technical Information / REACH DESIGN patented PROTAPE® tape hose 1. spring steel wire integrated in wall 2. wall: permanently antistatic premium ...
NORRES Schlauchtechnik GmbH
Inner diameter: 6 mm - 19 mm
Outer diameter: 12 mm - 27 mm
Pressure: 12 bar - 23 bar
... environmentally and free of heavy metals abrasion and aging resistant sterilisable permanently transparent very flexible Inner layer Soft PVC Insert one braided textile insert Outer ...
Inner diameter: 9, 6 mm
Outer diameter: 16, 13 mm
Pressure: 20 bar
... polyester lacquers Alkalis Colour green Special features sturdy durable exceptionally flexible Insert one high tensile synthetic thread braided insert Outer layer ...
Outer diameter: 0.75 in
Pressure: 20 bar
Temperature: 0 °C - 25 °C
... Pressure PN : 20 bars for flexible hose Ref.1371 et 1373 1 bar for discharge flexible with support Ref. 1372,1374 and 1375 Flexible hose 90° ends ...
Inner diameter: 70, 45, 25 mm
Pressure: 17, 20, 30 bar
Delivered length: 60 m
... polyethylene. CHARACTERISTICS Its design and weight make it an easy hose to roll, transport and unfold. Its good flexibility, even at low temperatures, avoids problems of flow loss and hose management. Its ...
Inner diameter: 3 mm
Outer diameter: 7 mm
Pressure: 10,000 psi
... • Hose is hard to break and very flexible • Adapt from hose to virtually any device under test with only one connection • A corrosion resistant strain-relief on each hose ...
Inner diameter: 3 mm
Outer diameter: 6 mm
Pressure: 69,000 psi
Go Easy! Install flexible, high pressure hoses in applications where a rigid tube puts undue stress on tube fittings. Hoses fit Swagelok, Parker, Hoke, ...
Inner diameter: 3, 4 mm
Outer diameter: 5, 6 mm
Pressure: 13 bar
Polyethylene hose (LD-PE), Temperature Hose PN at , blue, Roll of Low-priced, calibrated hose for use with screw fittings. With its soft and flexible character, ...
RIEGLER & Co.KG
Inner diameter: 25 mm - 102 mm
Pressure: 14, 17 bar
ESCHBACH AQUADUR Potable water hose Flexible lay flat hose for potable water supply and foodgrade applications, as a temporary bypass for pipeline repair and for emergency water supply. ...
Inner diameter: 4 mm
Outer diameter: 8.6 mm
Pressure: 210 bar
... Long description - High pressure hose - Application - Central lubrication system for stationary and mobile applications Flexible connections between individual components - Properties ...
Inner diameter: 0.05 in - 0.33 in
Outer diameter: 0.125 in - 0.5 in
Pressure: 0.8, 0.65, 0.5 MPa
SMC's series of polyurethane tubing is manufactured from Polyether resin, insuring the longest possible tube life due to its immunity to hydrolysis. Series TIUB inch size tubing is available in 8 "quick ship" colors, ...
Inner diameter: 3 mm - 8.1 mm
Outer diameter: 7 mm - 13.3 mm
Pressure: 275,000,000 Pa - 300,000,000 Pa
... quality standards which are met • Design factor: >2:1 Applications: • Tube cleaning such as heat ex-changers in the chemical and oil refining industries • Applications as flexible lance at working ...
Parker Polyflex Division - Europe
Inner diameter: 25 mm - 400 mm
Outer diameter: 53 mm - 441 mm
Pressure: 10 bar
... couplings). Hose is ATEX approved for dimensions above 40mm. Couplings/Fittings Hoses are fitted with BLOC-END® and must be used to the following maximum working pressure: ID≤150mm: 10bar. ID>150mm: ...
Trelleborg Industrial Hose
Inner diameter: 19.1, 9.5 mm
Outer diameter: 29.4 mm
Pressure: 2.1 MPa
... Blue (water hose) or red (air hose) EPDM for abrasion and weathering resistance. • Air Hose Couplings: Steel crimp male universal x male universal for a durable, safe and secure connection. • ...
Inner diameter: 0.5 in - 2 in
Outer diameter: 0.8 in - 2.26 in
Pressure: 5,000 psi
... times longer than standard hose during hose-to-hose and hose-to-metal abrasion tests per ISO 6945 and offers superior ozone and weathering resistance. The optional ...
GATES
Inner diameter: 9.9 mm - 51.1 mm
Outer diameter: 20.2 mm - 71.5 mm
Pressure: 350 bar - 380 bar
The high flexible multispiral compact hydraulic hose with reduced bend radii and bending force meets ISO 18752 – CC GENERAL TUBE Synthetic rubber, resistant against hydraulic fluids ...
Semperflex
Inner diameter: 1.6 mm - 25.4 mm
Pressure: 10, 100 psi
Deliver consistent flow rate and superior protection against rupture, even at operating pressures up to 100 psig, with this durable, resilient tubing for peristaltic pumps. GORE STA-PURE Pump Tubing Series PCS enables reliable peristaltic ...
Inner diameter: 92 mm - 406 mm
Outer diameter: 99.8 mm - 416.4 mm
Pressure: 16, 15, 22, 17 bar
... Specially designed for drinking water transfer in trenchless pipe network repair. Total corrosion resistance and ease of transportation and handling. Premium flexible leak free hose adaptable ...
KURIYAMA EUROPE
Inner diameter: 4.6 mm - 52 mm
Pressure: 0 bar - 350 bar
Temperature: -40 °C - 135 °C
... biodegradable hydraulic oil, to meet industrial demands for high temperature pipe Tube:black heat-resistant oil synthetic rubber Reinforcement:one or two layers of super flexible high-strength steel ...
Luohe Letone Technology Co., Ltd.
Inner diameter: min 2.5 mm
Outer diameter: min 4.0 mm
... because there will be the risk of hose rupture. 2.Polyurethane tubes please be careful for working in the workplace where environment temperature is too high (>55 ℃) or full with chemical gas, because it may lead to a ...
WENZHOU HOLID Automation Equipment CO.,LTD.
Inner diameter: 20 mm - 150 mm
Pressure: 10 bar
Temperature: 0 °C - 95 °C
The CALPEX pipe is a flexible, self-compensating, constant and heat-insulated system with a medium-sized pipe of cross-linked polyethylene. Underground connections are not required. ...
Brugg Pipesystems
Due to the manufacturing process of these Moldflon™ Thermoplastic materials, extruded tubes made from Moldflon™ offer significant advantages over PTFE-tubes. Essential Advantages: Customized shape Large scale production Short ...
Inner diameter: 6.3, 10, 8 mm
Outer diameter: 13.3, 17, 15 mm
Pressure: 20 bar
Application: A flexible hose for the transport of acetylene. For welding and cutting, for arc welding using shielding gas and related processes. Also suitable for H, CO2, AR, & N. (Not suitable for LPG, MPS ...
Dicsa
Inner diameter: 0.3 mm - 700 mm
Outer diameter: 0.6 mm - 950 mm
... PTFE Tube Key properties Excellent chemical resistance Working temperature from -180°C to +260°C FDA approved Flame resistant - UL94V0 No stick Low friction Very good dielectric dielectric insulation properties Dechengwang ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining